SPL REPAIR TO BLDG NO P4 COOK HOUSE AT OLD AMRITSAR CANTT

Amount

Taking down shutter and removing from site of any description size but exc 1 sqm and n.exc 2 sqm complete all as specified and as directed.

Taking down chowkhats or frame without taking of shutter and removing from site exc 1.5sqm but not exceeding 4 sqm each complete all as specified and as directed.

Taking down chowkhats or frame (without taking off shutters) and removing from site n.exc 1.5sqm each complete all as specified and as directed.

Taking down cement plaster from walls/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries upto distance n exc 500 metre where directed complete all as specified and as directed.

Demolition of cement concrete (un-reinforced)in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 50 mtrs where directed complete all as specified and as directed.

Demolition of RCC in any position not otherwise specifically provided complete all as spedified and directed.

Material and labour PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, roof kerbs or mud stop, coping, rounded or chamfered on edges and like including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar as cutting, opening of exsiting wall complete all as specified and as directed and directed.

Material and Labour for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for 12mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and as directed

Material and labour for 05 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and as directed.

Material and labour for 15mm thick cement plaster in CM 1:4 on fair faces of brick work and finishing the surface even and smooth (without using extra cement) etc. complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and as directed.

Material and Labour for preparation of old decorated plastered surfaces, filling nail holes or patches with wall care putty to make surface smooth and applying two coats of oil bound distemper on walls all as specified.

Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

All as per item No. 15 above but one coat on old surface filling holes or patches with wall care putty to make surface smooth as on ceiling.

Material and Labour for preparation of new plastered surfaces including preparation of surfaces and applying two coats of cement base paint on walls complete all as specified and as directed.

Material and Labour for complete removal of existing treament including preparation of surfaces and applying two coats of cement base paint on walls complete all as specified and as directed.

Use and waste of formwork to Chullah hoods, chajjas,slab, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and as directed

Material and labour for RCC 1:1.5:3 using 12.5 mm mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed

Supplying and fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and as directed.

Supplying and fixing pressed steel frames 1.25mm thick for door size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and as directed.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintle hinges, holdfast etc as given below all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintle hinges size 75mmx12mm - 2 Nos per leaf complete all as specified and directed. Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately.

Supplying and fixing mild steel box type ventilator fixed type with glazing bar with mesh & glass as per primer coated complete all as specified and as directed.

Supply and fixing 30 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side complete all as specified and as directed.

Supplying and fixing 30 mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of mamber of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and as directed.

Supplying and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes complete all as specified and as directed.

Supplying and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and as directed.

All as per Srl item No 29 above here-in-before but fixed in repairs, complete all as specified and as directed.

Supplying and fixing 300 mm size, aluminium alloy,anodized sliding door bolt, clip type, and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section fixed with stainless steel screw complete all as specified and as directed.

Supplying and fixing butt hinges 100mm size medium weight cold rolled mild steel fixed with stainless steel screw complete all as specified and as directed

Supplying and fixing in repairs 150 mm size aluminium anodized barrel tower bolt of extruded section fixed with stainless steel screw complete all as specified and as directed.

Supply and fixing in repairs 250mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded complete all as specified and as directed.

Supplying and fixing in repairs 125 mm size extruded aluminium anodized handle cast type fixed with stainless steel screw complete all as specified and as directed.

Supply and fixing mild steel powder coated curtain rods 25 mm dia including knobs, brackets to hold the rod & a set of ABS finials of approved quality & appropriate qty of ABS plastic rings complete all as specified and as directed.

Material & Labour for Preparation of new wooden surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on steel surfaces exceeding 10 cm width or girth including preparation of new primed surfaces complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified and as directed. Note :- The quoted rates shall be include for necessary excavation and earth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 20mm complete all as specified and as directed. Note :- The quoted rates shall be include for necessary excavation and earth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed.

Supply and fixing galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed complete all as specified and as directed to walls, ceiling or laid in floor complete all as specified and as directed.

Supply and fixing galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed complete all as specified and as directed to walls, ceiling or laid in floor complete all as specified and as directed.

Supply and fixing in repairs PVC connection 450mm long of 15mm size with PTMT nuts on both sides complete all as specified and as directed.

Supplying and fixing in repairs bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.

Supplying and fixing in repairs stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and as directed.

Supplying and fixing in repairs angle valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and as directed.

Supply and Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including taking down of existing tank.

Supply and fixing Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minium weight 190 gms) complete all as specified and as directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surface of size as per site requirement 350x250x7mm/ 450x350x7mm thick joint free on and incl 10mm thick screed bed in cm(1:3)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles complete all as speciifed and directed.

Material and labour for joint free Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm to 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:4, complete all as specified and as directed.

All as per Ser item No 54 here-in-before but as in skirting over 10mm thick cement plaster in 1:3, complete all as specified and as directed.

Dismantling boarding , any description , fixed in any position with screws, complete all as specified and as directed.

Supplying and fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Material and labour for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening, complete all as specified and as directed.

Supply and fixing 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet Suitably placed fixing in Aluminium door etc, complete all as specified and as directed.

Supplying and fixing Anodised aluminium frame for doors,windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips, ruber neoprene packing anodised aluminium snap beading screw Tee etc section for weighing not less than 1.4 kg/RM complete all as specified and as directed.

Supplying and fixing Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed Note:- Each panel shall be measured separetely. Glass pane shall be measured and paid separetely.

Supplying and fixing 5.5 mm thick sheet glass ordinary quality in square or rectangular in size n.exc .5 sqm each in aluminium door or window shutter including taking out old damaged glass pane complete all as specified and as directed.

Supplying and fixing for aluminium door & window, aluminium wire cloth, .36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed

Material and labour for Solid PVC Wall Lining consisting of 5 mm thick Plain Colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete any description,fixed in any position complete all as specified and as directed.

Material and labour for 5 mm thk PVC sheet fillet of width 35 mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed.

Supplying and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

Supplying and fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and as directed.

Supplying and fixing Floor door stopper aluminium ally body and tongue anodised with hand drawn steel spring to door shutter of size 140 mm etc, complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed.

Material and labour for 50mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in sub base of floor, complete all as specified and as directed.

Material and labour forMachine cut kota stone slab flooring 16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to achieve mirror finish laid over & including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed

Material and labour for Machine cut kota stone slab flooring 16-18mm thick in riser of steps skirting dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to achieve mirror finish laid over & including 10 mm thic screed bed in CM 1:6 complete all as specified and as directed

Material and labour for 18mm thick PVC board in cup board shelve as in kitchen complete all as specified and as directed (Make / shade / design / size as approved by GE)

Material and labour for 20 mm thick PVC shutter, printed one side with one coting of ultra violet chemical, glossymat finish inc 100% termite/water proof, fireretrandenteco friendly. Weight not less than 12 kg per sqm incl Steel piano hinges, steel catcher,aluminium handle100 mm long ,aluminium hasp & stapple in repairs complete all as specified and as directed ( shade / design / size as approved by GE) complete all as specified and as directed.

Dismantling of PVC/CI pipe of 75/100mm dia fixed with cement joint complete all as specified and as directed.

Supplying and fixing PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supplying and fixing PVC (SWR) pipes 110mm dia bend any radius complete all as specified and as directed.

Supplying and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Material and labour PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement all as specified and as directed.

Dismantling of brick tiles single layers on roof, jointed and grouted / pointed in cement mortar including cleaning serviceable tiles and stacking properly for re-use, disposal of unserviceable tiles and debris /rubbish from site complete all as specified and as directed.

Demoliton of mud in roof any thickness including mud plastering and removing to distance exc 250m but n exc 500m complete all as specified and as directed.

Material and labour PCC 1:2:4 type B-0(using 12.5 mm graded crushed stone aggregate) as in roof kerbs, sloping padding and finishing the surface even and smooth (without using extra cement) complete all as specified.

Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm) laid on bituminous surfaces by forced application over entire roof area, sunken portion with overlapping 100mm to eiher side including applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm includingcleaning surfaces etc complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and flush pointing as work proceed in CM 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and as directed.

All as per Srl item No 83 above but except tiles. Note : (i) Serviceable brick tiles obtained from Srl item No 79 shall be reused.

Material and labour udaipur green marble 16-18mm thick confirming to sample kept in GE 's office ( table rubbed and polished inslab, stair case, step and like jointed with grey cement slurry mixed with pigment to match with shade of marble over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for preparation of untreated steel/iron surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coats of sythetic enamel paint over and incl one coat of red oxide primer, complete all as specified and as directed.

Material and labour for Polishing rubbing mirror finish two coat of old cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to complete all as specified and as directed

Factory made single extructed WPC frame size 50x 100 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed

Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw complete all as specified and as directed( steelness srew and butt hinges and necessary SS Screw shall be paid separately)

Supplying and fixing of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and as directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and as directed.

Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover)

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor, complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even, complete all as specified and as directed.

Material and labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings, complete all as specified and as directed.

Dismantling structural steel work including doors, gates including truss etc, complete all as specified and as directed.

Material and labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface, complete all as specified and as directed.

Material and labour Cutting holes (not exc 150sqcm) or into wallls or through brick walls built in Cement Mortar and making good with cement mortar 1:3 or Cement Concrete 1:2:4 Type B-1 as required at site, complete all as specified and as directed.

Supplying and fixing Steel work in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 etc, complete all as specified and as directed.

Supplying and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Taking down carefully existing point wiring of any type (i.e on wooden batten, surface conduit, casing capping or concealed conduit except existing conduit) complete for light, fan, socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site for taking credit of unserviceable items and re-fixing the serviceable items as per schedule and making good disturbed surface of walls, floors etc, complete all as specified and as directed. Note : (i) The existing conduit of concealed wiring will not be removed from site and same will be reused for point wiring under respective item hereunder. (ii) The qty of serviceable items (such as Ceiling/ Exhaust Fans and Geysers) will be refixed under respective item hereunder and unserviceable items such as switches, sockets, ceiling rose, holders, brackets, bulkhead fittings, LED light fittings, MCB DBs, sunken boxes and fixtures etc. shall be issued to contractor under schedule of credit

Material and labour for point wiring complete with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0 mm thick of suitable modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as specified and as directed for items 104.01 to 104.03

Ser item No 104 contd.../- NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates. (ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.

One light/fan point controlled by one switch

One 5 Amps outlet point on same board with other switches/sockets

One 3 pin 5 Amps socket outlet on independent board.

All as per ser item No.104 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and as directed

Supply and fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and as directed

Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed

Supply and fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed

Supply and fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan all as specified and as directed

Supply and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified and as directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI> 80, PF>95%, THD<10%, Lumen>2100 lm including LED tube light of make: Havells or equivalent in Philips/Crompton, connecting up with 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose complete all as specified and as directed.

Supply and fixing Dusk & dawn roadway luminaries 45 Watt, 230 V AC, 5700K outdoor type with epoxy black powder coated sheet of make: Havells or equivalent make of Philips/Crompton, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics, PF>95%, THD<10%, Lumen>4500 lm with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing all as specified and directed.

Fixing only of geyser (Electric Water heater storage type) of capacity 25 Lts, complete and testing all as specified and directed. Note: (a) Geyser received from srl No. 103 here-in-before to be refixed. (b) Cost of minor petty items if required such as nuts/bolts/PVC pipes shall be deemed to be included in the quoted rate.

Fixing only of ceiling fan 1200/1400 mm size , complete and testing all as specified and directed. Note: (a) Ceiling fan received from srl No. 103 here-in-before to be refixed. (b) Cost of minor petty items if required such as nuts/bolts/PVC pipes shall be deemed to be included in the quoted rate.

Supply and fixing exhaust fan, heavy duty, steel body AC single Phase, 230V of size 450mm sweep, with blades and frame and louvers complete fixed to wall with suitable MS bolts, including cutting hole as required size, grouted to wall including connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan complete all as specified and as directed

Material and labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as specified and as directed NOTE: (i) MCB DB & MCBs should be of same make as mentioned above.(ii) Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.

Supply and fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site complete all as specified and as directed

All as per ser item No. 118 above but for MCB SPN 32 Amps complete all as specified and as directed

Supply and fixing sub main wiring with 2 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete all as specified and as directed NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Material and labour for loadline distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar,door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, complete incl taking down old unsv one from site complete all as specified and as directed

Supply and fixing MCCB triple pole and neutral (four pole) 100 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and as directed

Material and labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing

Ser item no 103 contd../ charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and as directed. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.

Supply and Laying in trenches/drawn through pipes or in road crossings/paths/drains/ ducts/floors/along poles/equipments etc., of LT cable under ground, heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of 35 Sqmm 3½ core cross sectional areas including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. NOTE: Excavation, earthwork, cable protection pipe shall be measured and paid separately

Supply & laying double wall corrugated (DWC) high density poly ethylene (HDPE) of size 40mm dia including all necessary fittings, PN-4 rating, pressure 6 Kgf/cm², conforming to IS-16205 (Part-24) with high ring stiffness & cursh resistance capacity, etc., laid in trench for protection of submersible flat cable complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation for erection of poles, stays, laying cables, stays etc and getting out in soft/loose soil and in road cutting complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose complete all as specified and as directed.

Removing excavated material/surplus soil not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above starting point complete all as specified and as directed.

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed

ESS KAY BUILDER (BID ID -3298900)

m/s. gopal krishan (BID ID -3304589)

Sai Construction Co. (BID ID -3304393)

Bharat Builder (BID ID -3299330)