REPAIR/MAINT TO WALL PANELLING, FALSE CEILING, PLINTH PROTECTION, PCATT, HARD STANDING, FLOORING, PLASTERING, ROOF SHEETS AND OTHER CERTAIN E/M WORKS IN TECH AREA AT AF STN GWALIOR

Amount

Dismanling of wall and ceiling boards (fibre ,pulp, insulation etc ) or insullation boards /slabs/ blankets any thickness including wall paneling cover fillets or aluminium grid frame work complete all as specified and directed.

S&F 5mm thick solid PVC wall Panneling/lining any colour wood grains printed PVC pre laminated sheet, one side including beadings at top, bottom, corners of door window jambs of matching colour Jambs over inclusive of solvent cement and fixing at site over PVC fillets complete all as specified and directed. Note: Colour, pattern and design as approved by GE.

S&F PVC wall lining/Panneling consisting of 10 mm hollow section interlocking type fixed to wall any colour wood grains/ printed decorative PVC sheet, pre laminated inclusive of solvent cement and fixing with hidden screws and all necesary beadings at top, bottom, corner, Jambs, complete including dismantling of existing wall paneling along with cover fillets, all as specified and directed by Engr-in-Charge. Note: Colour, pattern and design as approved by GE.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

S&F 30mm thick Acoustic peforated prelam PVC wall panelling consisting of PVC perforated panels having wall thickness of 4.5/5mm PVC sheet(of dencity 600/Kg/Cbm and the desired thickness of glasswool/rockwool pasted with perforated sheet with suitable adheisive. The strips should have in there centre a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall usin 65mm long MS screws through the groove in he strips by using PVC raal plugs. The distance of two screws shall not be les than 200mm . A grove of 2mm be left at the joint of two panels for asthetic looks. The wall screws shall be placed at a distance of 15mm and shall be 25mm fron the edge of the of the insulated pannel on all four side of the panel. The PVC strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at he places where two panels are joined, so as to cover the screw of both the pannels, using solvent vement 900heat bent stripof 5mm hick PVC sheet of width 75mmx75mm feathered at edges shall be stuck at wall joints/pillars etc.

S&F 30mm thick Acoustic peforated prelam PVC false ceiling panel made of 4.5/5mm thick PVC perforated sheet of size 600mmx600mm on 25mm glasswool/rockwool pasted with perforated sheet with suitable adheisive. The panel is inserted in a frame made of GI 'T' & 'L" section of size (25mx25mm) in square type grid of 600mmx600mm the false ceiling 4mm dia GI suspender of suitable size and dash fastners to be provided @ 1.20 mtr distance complete all as directed.

M&L 16mm thick acoustic mineral fibre micro perforated finish (Reveal type) approved pattern with exposed GI framework grid 600mm x 600mm grid with approved pattern fixed over and including pre powder coated GI frame with suspension system (Grid) comprising of T section 25mmx 32.5mm x1.60mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling 4mm dia GI suspender of suitable size and dash fastners to be provided @ 1.20 mtr distance complete all as directed. Make : GypRoc (Clotex Serino) Saint Gobain, Armstrong (RH 99 Dune) etc

S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic) decorative finish including E-grid suspended false ceiling grid system 600x600mm with main runner 33x24x0.6mm, cross tee 25x24x0.6mm and wall angle 19x22x0.4mm ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fasteners to RCC Roof or from purlin with butterfly clips hold down clips etc from soffit at approx 1.20mtr centre to centre complete all as specified and directed. Make- Everest Industries Ltd, Armstrong, Ramco.

S&F in repairs 12mm thick Armstrong SCALA RH-70 Ceiling board with approved pattern (Make- Armstrong) 600x600mm size fixed to existing grid False ceiling including necessary tightening and levelling all as specified and directed complete all as directed.

Demollition of cement concrete ( unreinforced) including floor tile ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring/tiling complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth with using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/screed and dispose off from the premises.

M&L for glazed ceramic Coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.

M&L for 8-9 mm thick double charged vitrified coloured ceramic tiles (square/ rectangular) area of each tile exc 0.18sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over 15mm th screed bed in CM 1:6 complete all as specified and directed.

M&L for 10mm thick premium coloured ceramic tiles (Square/rectengular) area of each tile exc 0.36sqm but n.exc. 1Sqm in floors etc, set & jointed in neat cement slurry and pointed in white or coloured cement match with tiles over 20mm thick screed bed in CM 1:6 complete all as specified and directed. Make- Somany, Kajaria, Simpolo, Johnson.

All as per item No.16 here-in-before but as in skirting over 10mm thick cement plaster in CM 1:4 as backing coat complete all as specified and directed.

All as per item No.15 here-in-before but as in skirting/dado but 10mm thick cement plaster1:4 as backing coat complete all as specified and directed.

Dismentling Stone slabs and tiles, pavers of any description or thickness aid dry or pointed in floors, aprons etc.

M&L for 75 mm thick PCC 1:4:8 Type D2 (using 40mm graded Stone aggregate) as in subbase, floor and pavings complete all as specified and directed.

M&L for 15 thick Endura Acid and alkali resistant Industrial tile size (300mmx300mm) any colour with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors including 20mm thick screed bed with bedding layer in CM (1:4) complete all as specified and directed. Make: Johnson, somany, kajaria, Nitco, Regency etc

M&L for 10 thick designer parking tiles 300x300mm any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors including 15mm thick screed bed with bedding layer in CM (1:4) complete all as specified and directed. Make: DUROTA, JOHNSON (Endura), ORIENT ETC.

M&L for 60mm thick machine pressed precast coloured concrete interlocking paver block, Glossy finish any shape and size and colour confirming to IS 15658-2006, M-35 Grade complete all as specified and directed. Make: ISI Marked as Approved by GE.

All as per item No.23 but except paver blocks

M&L for sand/stone dust filling under floor watering and levelling to receive pavour blocks.

M&L in repair for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete.

M&L for PCC 1:2:4 Type B-1 (using 20mm graded Stone aggregate) as in flooring, kerbs, haunching, copping, etc complete all as specified and directed.

M&L 100mm th PCC 1:2:4 Type B-1 (using 20mm graded Stone aggregate) as in hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Forming 12mm thick Expansion joints full depth of slab filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including Dismentling of existing plain or corrugated steel /AC Sheet complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Ridge, valley/ gutter fixed with self tapping screws including Dismentling of existing Plain or corrugated steel /AC Sheet complete all as specified and directed.

M&L in repair for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete including demolition of brick work of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.all as specified and directed.

All as per item No 33 above but except Bricks.

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth (without using exrtra cement) complete all as specified and directed.

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed including taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of primer and a coat of putty white or tinted as approved all as specified and directed.

M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emultion @ 1.43 litre/ 10 sqm white or tinted over a coat of primer as approved and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the internal/ external wall anf floor junctions below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes with coloured CM 1:2 to match with the existing floor complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and plugging holes with CM 1:2 to match the existing surface complete all as specified and directed.

M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers and and applying a coat with putty to make the surface even and smooth matching to the adjacent wall surfaces and applying two coats distemper oil emulsion with roller over a coat of primer all as specified and directed.

M&L for Preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions and applying one coat of distemper oil emulsion with roller white or tinted as approved complete all as specified and directed.

Ditto as per item No.43 above but on ceiling surface complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of weather coat exterior emulsion paint with roller including filling cracks/ depressions with putty/POP to make the adjacent surface even and smooth complete all as specified and directed.

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth duly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick hylam laminated sheet cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following : (a) One light/ Fan point controlled by one way switch.

(b ) One 5 Amps switch socket combination on independent board.

(c) One 5 Amps socket on same board with other switches.

All as per item No-47 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, trminal boxes closed recossed type. PVC Plastic board all as required as specified and directed for the following :- (Make : Havells/Finolex/Polycab) (a) One light/ Fan point controlled by one way switch.

(b ) One 5 Amps switch socket combination on independent board.

(c) One 5 Amps socket on same board with other switches.

All as per item No-51 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F in repairs switch piano flush type single pole one way 5 Amps 230 V.

S&F in repairs switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose,

All as per item No-56 above but 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.) .

S&F in repairs socket out let 3 pin, 5 Amps, 230 Volt multipurpose flush piano type.

S&F in repairs fan regulator Electronic Step type (min 5 steps) 2module, 100W ISI marked by removing old u/s resistance type fan regulator including necessary connection in existing laminated switch board by making necessary holes etc., complete all as specified and directed by Engineer-in-Charge.

S&F in repairs lamp holder insulated body with back plate for battern fittings complete all as specified and directed by Engr-in-charge

Supply and fixing in repair 8 Watt Recess mounted fixed LED down light made of extruded aluminium housing and high power LED as light source with diffuser and driver complete all as specified and directed by Engr-in-charge. Make :- Havells CAT Part No SPARLEPROFIXDLR8W830MOD or equivalent to Philips/Oshram/Havells

Supply& Fixing in repairs LED Batten fittings 10 Watt complete with lamp & round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model Wipro Garnet 10W , D531065 of Wipro or Eq model of Philips/osram

Supply& Fixing in repairs LED Batten fittings 20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model Wipro Garnet 20W , D532065 of Wipro or Eq model of Philips/Osram/Havells

S&F in repairs ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified.

S&F in repair, DB sheet metal enclosure 4 way Single door SPN. Make:Indoasian /Havells/C&S

All as per item No-65 above but 8 way Double door SPN. Make:Indoasian /Havells/ABB

All as per item No-65 above but 12 way Double door SPN. Make:Indoasian /Havells/ABB

S&F in repair MCB SPN 10 to 40 Amps all as specified and rupturing capacity 10 KA, Make:Indoasian /Havells/ABB

S&F in repair MCB single pole 5 to 16 Amps all as specified and rupturing capacity 10 KA,Make:Indoasian /Havells/ABB

S&F in repair, DB sheet metal enclosure 4 way TPN Double door for mounting MCB.Make:Indoasian /Havells/ABB

Supply and Fix in repairs, for MCB TPN, 4 pole 40 Amps 415 Volts all as specified and repturing capacity 10 KA.complete.Make:Indoasian /Havells/ABB

Supply and Fix in repairs, for MCB TPN, 4 pole 63 Amps 415 Volts all as specified and repturing capacity 10 KA.complete.Make:Indoasian /Havells/ABB

M&L in repair for sub main wiring with two runs of 2.5 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through existing PVC conduit/casing caping alongwith accessories fixed an surface/concealed in walls, ceiling, floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 2.5 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only.Make:Havells/Finolex/Polycab

M&L for in repair sub main wiring with two runs of 4.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through existing PVC conduit/casing caping alongwith accessories fixed an surface/concealed in walls, ceiling, floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only. Make:Havells/Finolex/Polycab

M&L for in repair sub main wiring with two runs of 6.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through existing PVC conduit/casing caping alongwith accessories fixed an surface/concealed in walls, ceiling, floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 6.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only. Make:Havells/Finolex/Polycab

M&L for earthing in repairs complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick burried directly in grond earth pit not less than 2.25 mtrs deep below ground level with top edge of the plate not less than 1.50 mtr and below nomal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electric plate No-5 conneced to earthing test point all as specified or indicated including testing on completion.

S&F in replacement 8 Watt LED bollard light with Opel acrylic diffuser and IP-65 protection including necessary concreat work complete all as specified and directed Make :- Cat Part No CONEBL8WLED857SSYMTOPC/CG/Philips

Supply and fixing 18 Watt ultra bright PL-L LED suitable for four pin lamp holder alongwith in built surge protection of 3KV complete all as specified and directed. Make WIPRO/Havells/Philips

Supplying, fixing in repair & testing decorative recess mounting 36 watt LED full out put luminaries suitable for Armstrong ceiling, white powder coated sheet steel housing with paralite P5 square parabolic louver block in metallic perforated frame for low glare, aluminium reflector and accessories,connecting the same to electric source with and including copper conductor 23/0.0076 flexible twisted twin core cable , including all accessories and fixing arrangements for fixing the light fitting to false ceiling complete all as specified and directed. Make :Cat Part No Havells-VENUSNE02X2PLR18-48WLED830MOD Racess mounted 2x2 LED or equvlent Philips/CG

S&F in repairs moduler switch socket 6 Amps -2/3 pin combined 2 module, complete all aspsecified and directed.

S&F in repairs Modular Switch socket 6/ 16 Amps 2/3 Pin combined 2 module complete all as specified and directed.

S&F in repairs modular switch piano flush type single pole one way 6 Amps,1 module complete all as specifed and directed.

S&F in repairs modular fan regulator Step type 120W 2module complete all as specified and directed.

S&F for LED light fitting, 1x10 w bulk head luminaries, complete with all accessories and including connection up with twin core twisted flesible copper conductor cable with suitable size of 230v, 50 HZ comple all as specified and directed.MAKE: CG LBHN10CDL / Philips/Bajaj

Supply, fixing, connecting and testing in replacement integral LED flood light luminaries, 60 watts, with scondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP66 with mounting bracket and all accessories and connecting the same to electric source with using copper conductor 1.5 Sq mm PVC insulated flexible three core cable , including all accessories and fixing the light fitting to walls/ ceiling etc complete all as specified and directed. Make :- JJETAQUANTOPLUSFLP60WLED757SYSMLENS/Philips/Oshram

Supply, fixing, installation, commissioning and testing in replacement aviation obstruction lights ( on and over hangers / high rise buildings) comprising of integral LED aviation light comprising of die-cast aluminium alloy housing , with polycarbonate enclosure and including lamp and necessary connection with electric source with copper conductor 23/0.0076 flexible twisted three core cable complete all as specified and directed Make :- Bajaj Cat part No. BGAV 302 LED

Supply, fixing, connecting and testing 180 Watts LED highbay luminiare having fin ventilation technology for better thermel management and with cutting edge LED technology seeks to various industrial applications IP66, including clamps, nuts, bolts for fixing arrangement detachable type on wall, trusses with double fixing arrangement etc and connecting the same to electric source with using 2.5 Sqmm (nominal area) stranded copper conductor, three core, PVC insulated & sheathed cable, 1100 volts grade complete all as specified and as directed.Make:: Havells cat part No BAYBRITESAUCERHBP180WLED757WBTOLTG /Philips/Oshram

J.N.R. Engineers and Builders

lodhi builders

M/S J P ENTERPRISES

M/s Shubham Construction Co.

M/S YOGANSH CONSTRUCTION CO.

YASH DEVELOPERS AND CONSTRUCTION COMPANY

M/s. Ravi and brothers

RADHA MADHAV CONSTRUCTIONS