Construction of Compound Wall at alround And Paver Block of OHT Paruthikudi Ward No 2 in Thiruvaiyaru Municipality

Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footing, plinth beam, grade beam, stair case step, bed block etc. which require only normal strutting using M.S. sheets of size 90cm x60cm BG 10 gauge of stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10 x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centre to centre at suitable intervals etc. complying with standard specification. (The payment for centering shall be made only after the concrete is laid).

Supplying and fabricating MS (or) R.T.S. bar below 16 mm SI. 134 Supplying and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors -1 Qtl Adopting cost of rods as applicable for R.T.S rods

Plastering in Cement Mortar 1:5 mix 12mm thick in all floors complying with standard specifications including cost and conveyance of all material and labour charges etc., complete

Towards Supply and fixing of Iron Grill Gate & Safety Grills including cost and conveyance of all materials and all other labour charges etc. complete.

White Washing with two coats of Pres shell lime including cost and conveyance of materials and labour charges etc. complete as per Standard specification.

Painting two coats of approved cement paint of approved colour and quality including preparation of surface including cost and conveyance of all materials and all other labour charges etc.

Supplying and laying interlock concrete paver of approved design, colour and quality make as per driveways, vehicle parking, bus stand with M40 grade concrete blocks with minimum thickness of 63 mm and providing minimum 150mm thick sand cushion below the paver block as sub base with sand filling between the pavers and compacting the same as per paver with compactor as directed by the departmental officers, cost including all cost and conveyance of all materials to site and all other costs etc., complete as per standard specifications.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint over the priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)