Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹64.8 L+₹12.4 L (23.7%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹69.3 L+₹16.9 L (32.3%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L3 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹80 L
EMD Value
₹1.6 L
Closing Date
31 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8937 REPAIR REPLACEMENT OF SLIDING DOORS IRON GATES IN ZONE 1 2 AND 3 AT ND MBI UNDER AGE BR I UNDER GE NW KUNJALI
2023_MES_593036_1
8937/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
Please refer tender documents
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹1.6 L
Yes
21 Oct 2023
3 May 2023
2 Jun 2023
10 May 2023
31 May 2023
17 May 2023
3 May 2023 - 10 May 2023
Amount
Taking down existing mild steel SLIDING DOORS for and including replacing the MS plates, side guide rails, bottom guide rails,top guide rails, sponge rubber gaskets, sliding heavy iron doors roller etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of sliding doors complete all as per directed for sliding doors of area n. exc 10 sqm each, complete all as specified and directed.
All as per Item No.1 above but area of shutters exc 10 sqm and n.exc 20 sqm each
All as per srl item No.1 but area of shutter exc 20sqm each Note for Srl Item No. 1 to 3 (i) Supply only parts for srl item No. 1, 2 & 3 shall be measured and paid separately
M & L for sliding heavy iron doors roller/wheel upto 200mmx150mm over all for sliding iron doors of any size including fixing arrangement, welding, brushing, ball bearing, greasing (Sample kept at GE (NW) Kunjali) complete all as specified and directed.
M & L for sliding heavy iron doors roller/wheel upto 300mmx200mm overall size for sliding iron doors of any size including fixing arrangement, welding, brushing, ball bearing, greasing (Sample kept at GE (NW) Kunjali) complete all as specified and directed.
M & L for sliding heavy iron door roller/wheel brushes of any size upto 300mmx200mm overall all as specified and directed by EIC (Sample kept at GE (NW) Kunjali).
M & L for sliding heavy iron door roller/wheel ball bearing of any size upto 300mmx200mm overall all as specified and directed by EIC (Sample kept at GE (NW) Kunjali).
S&F for greasing and easing in position of mild steel SLIDING DOORS of area n.exc 10sqm each for full movement and for easy operation for shutters complete all as specified and directed. Note :- For purpose of measurement and payment EACH TIME greasing and easing in position shall be considered.
S&F for greasing and easing in position of mild steel SLIDING DOORS of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M&L for greasing and easing in position of mild steel SLIDING DOORS of area exc 20sqm each for full movement and for easy operation for shutters complete all as specified and directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M&L for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying two finishing coats of synthetic enamel paint on steel surfaces complete all as specified and directed.
M&L for preparing old painted surface of any decription over 10cm in width or girth and applying one coat of aluminium paint complete all as specified and directed.
Dismantling structural steel works in doors, gates etc but excluding framed truss complete all as specified and directed.
S&F framed work in doors or gates of angle or other section with gusset plates, rails,ms plates, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.
M&L for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for taking down, chipping and removing the loose, spilt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thick in two coats, using polymer as per manufacturer's instructions complete all as specified and directed. Make : Dr. Fixit/Sunanda/chemestik/Fosrok Note :- New reinforcement and MS Sections will be measured and paid separately
M&L for taking down, chipping and removing the loose, spilt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement, wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and jacketing around columns/beams / other RCC members with Micro concrete (Mokith-MC) including all lifts, shuttering, drilling holes and fixing shear anchor/deficient reinforcement as per manufacturer's specification complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately. (Rates quoted shall be including jacketing, formwork and micro concrete). Make :- Dr. Fixit, STP, Fosroc as approved.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for.
RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, walls deck slabs in shelves and the like including all necessary form work all as specified.
M & L for mild steel TMT bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0 complete all as specified and directed.
All as per item No. 20 here in here in before but 5 mm dia and over upto and incuding 10mm dia in stirrups, spaces and binders
M & L for preparation of existing surfaces of roof top, RCC Gutter and parapet wall, crack filling with prime seal chemical and cement @ the ratio of 1:4, applying two coats of water proof chemical (Newcoat of dr. fixit or equivalent) and finally applying a coat of SBR latex and silicon powder paste not less than 2 mm thick complete all as specified and directed.
M&L for providing grouting 12 mm dia holes of 75mm deep @0.6 m c/c at junction of beams and columns as co-ordinal points for inserting/pouring mixture of Lw+, high proof chemicals and cement slurry by pressure grouting for column, beams and slabs, including sealing the holes with CM 1:3, complete all as specified and directed.
Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.
M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified and directed.
M&L for rendering 20 mm thick ready mix plaster as on fair faces of brick/stone work or concrete surfaces complete all as specified and directed.
M&L for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof complete all as specified and directed.
M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.
M&L for preparation of surfaces of walls, chajjas, parapets of an old surfaces etc. and applying one coat of acrylic exterior paint with and including errecion and dismantling of scaffolding after completion of work up to 8 storeys buildings complete.
Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil.
Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with new green cloth for carring out external facework of walls all as directed by Engr-in-Charge.
S & F in repairs for 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.
Taking down existing mild steel rolling shutters for greasing, oilling and refixing its original position after repairs complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed.
All as per Srl Item No.33 here in before but area of shutters exc 10 sqm and n.exc 20 sqm each
All as per Srl Item No.34 here in before but area of shutter exc 20sqm each Note :- Any parts required for srl item No. 33,34 & 35 shall be measured and paid for separately
S&F for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc and similar work all as specified and directed.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish with WPC @3% weight of cement complete all as specified. (Note : Water proofing compound shall be measured and paid seperately
Supply only integral water proofing compound.
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc all as specified and directed.
M&L for PCC 1:2:4 type B2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc all as specified and directed. (Rate inclusive of necessary formwork and suitable arrangements )
M & L for cement concrete type B0, 1:2:4 (Using 12.5mm graded stone aggregate) in floor kerbs of mud stops, rounded or chamfered on edges.
M & L for preparation of old surfaces of any description and applying two coats of acrylic (antifungal) exterior grade paint on Asbestos/Glavalume sheets/mangalore pattern tiles including necessary scaffolding & removing of vegetation etc complete all as specified and directed.
S&F collapsible steel gates, top hung consisting of channel pickets,pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets complete all as specified and directed.
MADHU ENTERPRIZES
Nilesh Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .