SPECIAL REPAIR TO DOORS AND WINDOWS BY REPLACEMENT TO ALUNIMIMUN DOORS/WINDOWS OF MH INCLUDING CERTAIN OTHER ALLIED WORKS AT GMS UNDER GE I GOS

Amount

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

S&F Door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S & F Powder coated Openable Aluminium window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F Powder coated Fixed/ Louvered Aluminum window/ Ventilator with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F Powder coated Fixed Aluminium Partition with frame not less than 1.8 mm thick including 5 mm thick tinted glass with or without 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations beading & necessary rubber packing, all fitting and fixture complete all as specified and directed.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm but not exiding 2 Sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed.

S&F in repair 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces, guard bars etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer incl preparing surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M & L for two coats of cement based paint over a coat of primer on new plastered surface of walls including preparation of surface complete all as specified and directed.

Supply, installation, testing & commissioning silent generating set with accoustic enclosure of capacity 62.5 KVA Diesel Engine driven 3 phase 415 VoltS,4 wire,50 hz ,0.8 PF,1500 RPM engine as per IS : 10001/10002 and alternator as per IS 13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. complete all as specified & comprising of the following :- (a) Prime Mover : Suitable for driving 62.5 KVA alternator, battery (electric start) diesel engine of suitbale capacity BHP confirming latest IS and a fuel tank suitable for 12 hours consumption capacity mounted on MS frame pedestal support, rated for continues running, capable of taking 10% over load for one hour in any 12 hrs operation taking into consideration de-rating due to altitude/temp & complete with following standard accessories. (i) Fly wheel and fly wheel housing to match with the flexible coupling. (ii) Flexible coupling with guard. (iii)Air cleaner dry type. (iv) Lubricating oil filter,flow paper element type.(v) Blower type fan. (vi) Fuel pump. (vii) Governor class 'A' governing as per latest IS. (viii)Turbo charger. (ix)Starter, motor for electric start complete with dynamo /alternator, lead acid storage batteries heavy duty of 12 V 100 AH capacity shall be brought to site uncharged with initial charge of electrolyte before commissioning starting/stopping switch, ammeter, Voltmeter, Voltage regulator and battery leads of adequate size and length for connection (x) Hour meter (xi) Exhaust silencer with exhaust piping brought out side the building and (complete lenght of exhaust silencer,and exhaust piping should be wrapped with 12 mm dia asbestos rope) (ii) instrument panel duty wired into prime mover and comprising of :- (a) Lubricating oil temperature guage (b) Lubricating oil pressure guage (c) battery charging ammeter (d) Starting switch with key and cut out (xiii) Lubricating oil pump (xiv) Fuel filters. (xv) Hoses for fuel tank (xvi) Vernier control system for speed regulation.(xvii) Air cleaner assembly.(B) Alternator suitable for 62.5 KVA capacity DG set at 0.8 PF self excited,self regulated ,3 phase 50 Hz,415 V 1500 RPM 4 wire alternator,screen protected,drip proof free from stimulation problems,continous rating conferming to latest IS complete with automatic vol Make ;- Kirloskar,.Note:- The Unsv. DG Set will be Deposited to the AGE E/M Store yard .

Taking down old unserviceable and Supply, fixing,testing and commissioning of Centrifugal motor with pump set 40 HP (30KW) , electric driven , 3 phase , 4 pole , suitable for suction and delavery line of size 150 x 100 mm, supply and install ,40 Meter head ,1500 RPM ,30 LPS, ND200L complete fitting and testing ,alignment of motor, complete all as specified and directed. Make :- Kirloskar or equivalent of higher cost Note: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .

Taking down old unserviceable and Supply,fixing ,testing and commissioning of Centrifugal motor with pump sets 15 HP (11KW) , electric driven , 3 phase ,4 pole, suitable for suction and delavery line of size 100 x 100 mm, supply and install ,35 Meter head ,1450 RPM ,13.5 LPS, ND200L, complete fiting and testing, alignment of motor , complete all as specified and directed. Make :- Kirloskar or equivalent of higher cost. Note: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .

Taking down old unserviceable and Supply,fixing,testing and commissioning of Monoblock pump sets 7.5 HP(5.5 KW) , electric driven ,3 phase suitable for suction and delavery line size 100x100 mm supply and install 7.5 HP (5.5KW ), Head- 27 Mtrs,capacity-13.5 LPS, RPM-3000, (Model KDS 822++ ,code D12010750110, complete fiting and testing, alignment of motor, complete all as specified and directed. Make :- Kirloskar or equivalent of higher cost NOTE: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .

Taking down old unserviceable and Supply , fixing,testing and commissioning of Openwell Submersible Motor pump sets 5 HP (3.7KW), electric driven ,3 phase suitable for delavery line size 50X40 mm supply and install 5 HP (3.75KW ), head-15 Mtrs,Capacity-16 LPS,RPM-3000, (Model JOS-550 5.0 50X40 3P CII Make :kirloskar,CG complete fiting and testing ,alignment of motor , complete all as specified and directed. Make :- Kirloskar or equivalent of higher cost. Note: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .

Taking down old unserviceable and Supply,fixing testing and commissioning of Openwell Submersible Motor pump sets 3 HP (2.2KW) , electric driven ,Three phase suitable for delavery line size 50x40 mm , 3 HP (2.2) , Head-16 to 26 Mtrs,RPM-2840, (Model JOS-335 3.0 50X40 3P CII complete fiting and testing, alignment of motor, complete all as specified and directed. Make :- Kirloskar or equivalent of higher cost. Note: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .

Taking down old unserviceable and Supply and fixing Monoblock pump sets 1 HP, electric driven , singal phase suitable for suction and delavery line size 25x25 mm supply and install 1 HP (Model GMC 134 ,code D12210100720, complete fiting and testing, alignment of motor, complete all as specified and directed. Make :- Kirloskar or equivalent of higher cost. Note: The Unsv. Pump sets will be Deposited to the AGE E/M Store yard .

S&F 110mm OD 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc complete all as specified and directed. Make : SFMC or equivalent of higher cost.

All as per Item No 36 above but of size 90 mm OD.

MM ENGINEERING SYSTEMS

V.Venkata Ramaiah

M/s Bapujee Builders and Traders

M/s Jai Sree Hari

M/S K MURALIDHARA PATRA

S J ENTERPRISES

M/s TECH TEAM