PROVISION OF DEFICIENT SINGLE LIVING ACCN AND GALLEY FOR SAILORS AND DSC PERSONNEL AT INS DWEEPRAKSHAK

Amount

Total amount of Sch 'A' part-I ( Building)

Total amount of Sch 'A' part-II (Excavation, earthwork, site clearance & Development)

Total amount of Sch 'A' part-III (Internal water supply)

Total amount of Sch 'A' part-IV (Internal Electric Supply)

Total amount of Sch 'A' part- V (External Water Supply)

Total amount of Sch 'A' part-VI (External Electric Supply)

Total amount of Sch 'A' part-VII (Lightning Protection)

Total amount of Sch 'A' part-VIII (Area Drainage)

Total amount of Sch 'A' part-IX ( Sewage Disposal )

Total amount of Sch 'A' part-X (Road/ Path/Hardstanding)

SCH. 'A' PART -XI (Miscellaneous B/R & E/M Items ) Note :- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

DEMOLITION OF BUILDINGS

Dismantling of plain or corrugated steel Sheeting of any gauge,thickness incl ridges, hips valley as in roof covering

Dismantling ceilling boards/wall panelling any thickness including cover fillets.

Taking down chowkats or frames with shutter n. exc 1.5 Sqm (without taking down shutter from the frame)

Taking down chowkats or frames with shutter exc 1.5 Sqm but not exc 4 Sqm (without taking down shutter from the frame)

Demolition of brick or stone/boulder masonry work built in cement mortar including all quoins, arches, pillars etc

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level).

Demolition of reinforced cement concrete in any position not otherwise provided for

Dismantling of timber scantlings 40 Sqcm and over in section , in any position

Dismantling of timber scantlings in rails,posts, rafters, purlins, etc under 40 Sqm and over in section

Dismantling Mild steel work of any position complete.

Dismantling of water tanks exc 500 L & n.exc 1000 L and removing to store.

Taking down tubing and connectors of 20 mm bore.

Taking down tubing and connectors of 25 to 32mm bore.

Removing building materials etc. to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete and making good the disturbed surfaces of walls, floors, ceiling rose to match with existing all as specified and directed

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site or carrying to the store (to be measures only when found serviceable)

Taking down ceiling fans/exhaust fans from the existing position including all connections and depositing old ceiling/ exhaust fans to MES store complete all as specified and as directed.

M&L taking down MCB TPN DB/SPN DB from existing position including all connection all as specified and as directed.

M&L taking down MCB TPN /SPN from existing position including all connection all as specified and as directed.

Disconnection and taking down the earthing pit materials complete and depositing to MES store or as a credit to the contractor complete all as directed

INTERNAL ELECTRIC SUPPLY

ceiling fan 1400mm sweep copper wound having Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) as per IS 374:2019 including fixing of down rod and connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 Sq mm from connector to fan complete all as specified

Exhaust fan made of sturdy engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200 of sweep 250mm complete including making necessary provisions for mounting on walls all as specified and directed.

LED Tube light 1X20 Watt 4' universal battern type with and including connecting 3 core 1sqmm PVC insulated multistranded copper conductor's sleeve color matching to fitting and connecting up complete all as specified and directed at site

LED study light wall type fixture made of polycorbnate suitable for 3/5/7/9 W LED lamp including 3W LED bulb including connecting 3 core 1sqmm PVC insulated multistranded copper conductor's sleeve color matching to fitting and connecting up complete all as specified and directed at site

LED light 1X10 Watt 2' with and including connecting 3 core 1.0 Sqmm PVC insulated multistranded copper conductor color of sleeve matching to fitting and connecting up complete all as specified and directed at site

LED light fitting 600mm x 600mm,35/36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed at site.

Building LED security light 1x35W new generation energy saving and environmental friendly long life made of pressure die cast alluminium housing with hogh power LED as lighting source and lens embded PC cover having TOP OPENING seperade driver compartment with IP66 protection and impact resistance of IK 07 complete with and including wall mounted bracket fabricated out of 40mm GI pipe light grade bend to shape1.5 mtr long and two nos wall mounting clamps using 25x4mm thick MS strip bend to shape and welded with pipe to form solid structure and one run of 1sqmm PVC insulated multistranded copper cunductor wire conecting PVC terminal to fitting complete all as specified and directed

MCCB DB VTPN 4 way double door 415 Volts with provision for MCCB as incomer and SP/TP MCBs as out going with IP 43 protection, door earthing, isolated neutral bar, mechanical impact strength IK 09 including cement spill protecto of Make Crabtree Cat No DCDLVDCBGSTE04 or equivalent in other approved makes.

MCCB 4 pole of current rating capacity 63 Amps with breaking capacity Icu AC 16kA @ 415V AC 50 Hz conforming to IS/IEC 60947-2 & EN 60947-2 of thermal magnetic release with ON-TRIP-OFF indication of Make Legrand Cat No 420055 or equivalent in other approved makes.

Exhaust fan made of sturdy steel body complete with louvers shutter voltage 230V, 50 Hz, RPM 1200 of sweep 450mm complete including making necessary provisions for mounting on walls all as specified and directed

LED bulb 7 W, polycarbonate body 700 lumen all as specified and directed

Wall mounting fan 450mm industrial type high performance with heavy duty manual speed control 1400 RPM including all necessary connection all as specified and directed.

SUMMER APPLIANCES

Supply and fix refrigerator, electric driven (single phase), capacity more than 360 litres up to 460 ltrs, frost free, 5 star rating, top freeze refrigerator complete all as specified and directed.

Supply and fix Deep freezer glass top more than 320 litrs up to 400 ltrs having double door single phase 240 volt, 50 Hz complete all as specified and directed by Engineer-in-charge.

Supply and fix voltage stablizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capcaity 2.0 KVA

Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 1.5 TR, BEE 5 star rated

Supply and fix voltage stablizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capcaity 4.0 KVA

Supply and fix water cooler fully stainless steel, electric driven single phase having appx storage capacity of 80 ltr and nominal cooling capacity of 40 ltr per hour.

Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with accuracy of ± 2.5 % and capacity 1.0 KVA

EXTERNAL WATER SUPPLY

S&F open well monoblock submersible pump set, electric driven, 230V, 50 Hz, Ac supply of capacity 1.0 HP inclusive suction and delivery pipes connections complete all as specified and directed

Supply and fix DOL starter for 01 HP monoblock submersible pump, single phase, 240V, 50 Hz, AC complete all as specified and directed by Engr in Charge.

M&L construction of 200mm thick PCC solid block wall masonary valve chamber built in CM 1:6 with 150mm thick PCC foundation 1:2:4 type B-1 coping 50mm thick finished even and smooth, rendering 10mm thick in cement mortar (1:6), finished fair and and even externally including excavation earthwork in any strata, 6mm thick MS sheet cover fixed on angle iron frame 40x40x6mm embedded in PCC coping with locking arrangement and mild steel hold fast, mild steel handles and painting to steel surface with two coats of black bituminus paint over one coat of red oxide primer etc, complete all as specified and directed for internal size 600x600x600mm

SOIL INVESTIGATION

Soil Investigation at the proposed construction sites by drilling 100mm dia bore hole upto a depth of 10 metre below the ground level or 1 metre into the hard rock strata (whichiver is earlier) in any type of strata complete all as specified and directed by Engineer-in-Charge. Note : The rate quoted shall deemed to be inclusive of the following :- (a) Mobilization of tools, plants, equipments and manpower required for carrying out soil investigation, setting of boring/ drilling as required and later demobilization of plants and equipments after completion of work. (b) Collecting undisturbed and disturbed samples and performing STP test at every 1.5m interval. (c) Conveyance of sample collected at site to the testing lab as required for the purpose of testing and analysis. (d) Lab testing including triaxial test, direct shear test, liquid limit, plastic limit, plasticity index, grain size, specific gravity, ground crushing strength of hard rock samples recovered, unconsolidated triaxial shear test etc. (e) Estimation of SBC of soil. (f) Submitting photographic record during the process. (g) Submitting test report in triplicate, duly vetted by NIT/ Govt Engineering College along with detailed recommendation about type of foundation required.

Material and labour for trial pit excavation in any type of soil of size 1.2m x1.2mx2.0m and getting undisturbed and disturbed samples for performing necessary tests to obtain bearing capacity of soil complete all as specified and directed by the Engineer-in-Charge.

FUTURE ONE FACILITY MANAGEMENT

Agarwal Jagdish Construction Company Pvt. Ltd.