COMPREHENSIVE MAINT SUNKEN FLOOR AND CERTAIN B/R WORKS TO (G1 PLUS 6) HIGH RISE BLDGS OF MAP MD ACCN G, H AND K PKTS UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as directed

Taking down cement plaster on brick walls etc including Rcking out joints hacking to key scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 (externally) finished even and fair without using extra cement including water proofing compound complete all as specified and as directed (Water proofing compound should be paid seperately) .

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint , complete all as specified and as directed.

Taking down cement plaster from the Fallen Grit Panels upto 6th Floor etc including Rcking out joints hacking to key scrubbing down with water etc including Scaff folding to required height as needed complete all as specified and as directed by Engr-in-Charge

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 (externally) finished even and fair without using extra cement including water proofing compound and including Scaff folding to required height as needed upto 6th Floor complete all as specified and as directed (Water proofing compound should be paid seperately) .

M&L rendering 15 mm thick in CM 1:6 on concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.

"Supply only" of integral water proofing compound (ISI marked)

M&L for prepration of newly plastered surfaces of walls including cornices pilasters etc and applying two coat of oil Emulsion Distemper (OBD) over a coat of priming surface complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling including cornices pilasters etc.and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces),washing rubbing down and stopping of distempered and painted surface and applying one coat of oil Emulsion Distemper (OBD) complete all as specified.

M&L for Complete removal of existing surfaces of wall and applying two coat of oil Emulsion Distemper (OBD) over a coat of birla white wall care putty complete all as specified and as directed.

M&L for preparation of old decorated plastered surface of ceiling including cornices pilasters etc.and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying Two coat of cement base paint complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint of (white or tinted) complete all as specified.

M&L for preparation of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint all as specified and as directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified and as directed.

M&L for non skid ceramic tiles/ non skid tiles premium qulaity coloured 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile,including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and as directed. Make for Ser No 20 to 23 :- Kajaria/ Somany/ Johnson.

M&L for Non skid ceramic coloured tiles premium qulaity 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed..

M&L for Non skid ceramic coloured 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles premium qulaity of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

M&L for 20 mm thick machine cut green udaipur stone jointed with neat cement slurry mixed with pigment to match the colour of stone and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed

Taking down chowkhats or frame with shutter (without taking off shutter from the frame), n. exc 1.5 Sqm, complete all as specified

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.0 Sqm each and removal to store complete all as directed.

Taking down shutters of exc 1.00Sqm but n. exc 2.00 Sqm each, complete all as specified and as directed.

Taking down shutters area exc. 1 Sqm but n. exc. 2 Sqm and refixing in the same opening after easing and adjusting and making the door closing properly including refixing builder's hardware complete all as specified and as directed.

Easening of door exc 1sqm but not exc 2 Sqm each by making ajdustment to hinges planning the sides of doors without taking down of door and refixing if required complete all as specified.

Petty repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required complete all as specified.

Demolition of cement concrete of any description and in any position (as in sunken portion also) and removing surplus spoil out of defence land all as specified and as directed.

M &L for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:- (i) Application of Two component acrylic modified cementitious coating (aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:- (bb) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of Sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP

(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces three sides including dismantiling of existing tiles. (jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. (kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/conforming to IS 2645.

Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. (ll) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (nn)Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (ii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent. (iii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around. (iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate) complete all as specified.(Paid Seperately)

(v) Providing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface complete all as specified and as directed. (vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. Note:-Item No 25 (iv) ,(v) &(vi) shall be measured and paid seprately.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified and as directed.

"Supply only" Integral waterproofing compound (ISI Marked) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S&F Pressed steel door frame double rebates of size 125mm x 60mm with including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

Material and labour for mild steel work as in door frame chowkhat/ cooler stand etc including necessary cutting drilling and welding etc complete all as specified and as directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and as directed.

Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

S&F 40mm thick factory made flush shutter solid core construction with block board core and plywood face panel one face is covered with decorative veneer with lipping/frame complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F 100mm size MS butt hinges medium weight cold rolled (zinc cromate)., complete all as specified and as directed.

Ditto all as per item No. 49 above but in repairs complete.

S&F 100 mm butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 100 mm long, complete all as specified and as directed.

Ditto all as per item No.52 above but in repairs complete

S&F Extruded aluminium alloy handles, fabricated type,anodised 100/125 mm in size, complete all as specified and as directed.

Ditto allll as per item No.54 above but in repairs complete

Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and as directed.

Ditto all as per item No.56 above but in repairs complete

Material and labour mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

Ditto all as per item No.58 above but in repairs complete

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and as directed.

Ditto all as per item No.60 above but in repairs complete

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Ditto all as per item No.62 above but in repairs complete

Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

Ditto all as per item No.64 above but in repairs complete

S&F in repairs Magic Eye in Doors anodised complete all as specified and as directed

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with 200mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F in repairs Aluminium anodised 300mm long 10mm dia Tie Hanger in Cup Board fixed complete all as specified and as directed.

Supply & Fixed in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm when open complete all as specified.

S&F for 100 mm size Hasp and staple, aluminium anodised, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified

Petty repair to existing Aluminium window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified.

Material and labour welding in repairs exc. 2.5cm but n. exc. 5cm in length & thickness of metal to be welded not exceeding 6mm complete all as specified including Material and labour.

M&L in repairs 25mm dia Aluminium powder coated Drapery Rod 20mm dia fancy type brackets and finales fixed on both ends, complete all as specified and as directed

M&L in repair 20mm dia curtain rails , mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified

S&F in repair 12 mm plywood, grade BWR type BB ( No. of ply 7) fixed with screw to timber frame or shutter any thickness complete all as specified.

S&F in repair anti dusting rubber beeding for door shutter for anti snakes, dusting etc all as specified

S&F in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination including dismantling , complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads as directed.

Supply and fix sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

Material and labour for securing glass of any description in existing wooden/ steel frames glazed with putty/ bends including removing loose or decayed putty/ beads, painting/ oiling one coat on rebates, grooves, reputting and painting/ oiling to match existing work (new length of frames reputtied shall be measured) complete all as specified

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

All as per item No. 81 above but in repairs

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and as directed

Taking down aluminium door/Window shutter including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.

S & F for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

M&L for Mortice lock, vertical type, size 100mm 4 lever Brass body, complete all as specified and as directed.

S&F 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,complete all as specified and as directed.

S&F in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F in repairs Hanging Rod in Cup Board fixed complete all as specified and as directed

Cleaning of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve , washers etc and making functional, ensuring proper water supply complete all as specified and as directed by Engineer in charge

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC syphons, leaking PVC bends/GI pipes etc. complete all specified and as directed by Engineer in charge

S&F in repair, bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and as directed.

S&F in repair Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified.

S&F in repair stop/angle valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and as directed .

S&F in repair stop/angle valves 15 mm nominal bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type,chromium plated, complete all as specified and as directed .

S & F 15 mm bore brass ball valve high pressure with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified.

S & F 20 mm bore brass ball valve high pressure with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified.

S & F 32 mm bore brass ball valve high pressure with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified.

S&F 40 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, all as specified.

Supply and fixing 15mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified

Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified

Supply and fixing 25mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified

S&F in repairs PVC internal fittings including syphon kit for low level flushing cistern complete all as specified.

Supply & fixed in repairs PVC connection 15 mm size , 45 cm long with PTMT adopter,check nuts and washer on both sides complete all as specified.

S&F in repair brass chromium plated water jet with flexible tube of suitable length fixed on water closet (English type) complete all as specified.

S&F in repair brass chromium plated health faucet with flexible tube of suitable length fixed on water closet (English type) complete all as specified.

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type WC complete all as specified.

S&F 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete, fixed in repair,all as specified and as directed.

S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and as directed.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F for 32 mm bore size waste coupling for steel sink/WHB/urinal etc with PVC cap complete fixed in repairs all as specified.

S&F in repairs angle iron brackets for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same complete all as specified.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 125mm wide with chromium plated bracket guards and railing 60cm long complete all as specified and as directed.

Supply and fixing glass corner shelf (with bracket) of min size 250x250mm (as approved) complete all as specified and as directed

S& F in repair Soap dish, any type, with size of 120x80 mm fixed to plugs with chromium plated brass screws as specified.

S&F in repair towel Ring of Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

S & F in repair of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe complete all as directed.

Supply and fixing in repair stainless steel kitchen rack of size 31" x 36" x 10" and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed

S&F in repairs plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete complete all as specified and as directed.

S&F in repair J-Bolt/Baby Latch Mild Steel Bolt for fixing in complete all as specified and as directed.

S&F in repair of any dia PVC waste pipe for WHB/sink/urinal, complete all as specified.

S & F for Low density polyethylene (HDPE) 40mm pipes of pressure rating 6kgf/sq cm.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bendetc. complete all as specified and as directed .

S&F 40mm Brass Knob for Cupboard/Loft/loft over door knobs brass polished fixed with nut, screw and washer of mild steel, bright finished

S&F Ball catches with 8mm dia stee lball, and brass body and striking plate including letting in and fixed

Petty repair to Steel rolling shutters system of any size area exc 1.5 sqm and any description including reparing of ball bearing, top cover, anchoring rod, hasp and staple,gear operated system,crank handle, chain wheel and hand chain including necessary welding, grreesing etc and making the shutters complete serviceable all as per existing pattern as specified

S&F in repair Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified

S&F in repair, Coloured PVC bath Cabinet of size 450x450x90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

S&F in repairs for 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms)

S&F Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,all as specified and as directed

S&F in repair wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

S&F galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and as directed.(Note:-Scaffolding should be arranged by the contractor as per the requirements of the site to rectify the leakages in ducts etc)

S&F re-fixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and as directed.(Note:-Scaffolding should be arranged by the contractor as per the requirements of the site to rectify the leakages in ducts etc)

S&F galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and as directed(Note:-Scaffolding should be arranged by the contractor as per the requirements of the site to rectify the leakages in ducts etc)

S&F re-fixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and as directed.(Note:-Scaffolding should be arranged by the contractor as per the requirements of the site to rectify the leakages in ducts etc)

S&F 500 ltr UV protected Anti microbial (white) rotational moulded polythene water storage tank cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, complete all as specified and as directed.

S&F 1000 ltr UV protected Anti microbial (white) rotational moulded polythene water storage tank cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, complete all as specified and as directed.

S&F in repairs water tank cover of 500 Ltrs capacity and description, complete all as specified.

S&F in repairs water tank cover of 1000 Ltrs any capacity and description, complete all as specified.

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, all as specified.

S&F in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union etc suitable for 15mm bore pipe complete all as specified and as directed by the Engr-in-Charge.

S&F in repairs GI / UPVC fittings like socket, elbow, tee, nipple, union suitable for 20mm bore pipe complete all as specified and as directed by the Engr-in-Charge.

Supply and fixed in repair brass spindle for pillar cock, stop cock (Concealed), angle cock, bib cock & wall mixer cock for 15mm complete all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm, complete all as specified and as directed

Ditto all as per item No 154 above but 75mm complete

S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed.(Note:-Scaffolding should be arranged by the contractor as per the requirements of the site to rectify the leakages in ducts etc)

S & F 110 mm PVC (SWR) branch pieces (Tee) with cement joint complete all as specified and as directed

Ditto all as per item No 157 above but 75mm complete

S & F 110mm bore PVC(SWR) bend/shoe of any radius, with cement joint complete all as specified and as directed.

Ditto all as per item No 159 above but 75mm complete

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified.

M & L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

M & L for PVC (SWR) Floor trap of Size as per the site requirement with min Size 110 mm with MS Grating, setting and jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

M & L for PVC (SWR) Stainless steel Cockroach Trap 150/125/110mm, setting and jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge

Material and labour for repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and as directed.

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified & directed.

Cleaning of roof removing bushes, mud, debris, digging out roots and making good the disturbed portion of roof tiles with pointing in CM (1:3) including matching the same complete all as specified and as directed

Note for above work:- (a) Contr shall submit at least three samples of material for approval of GE. (b)Mke of sanitary fittings:- Jaquar/ Cera/ Ess-Ess (c)' Make of plumbring work:- Parryware/ Hindware. (d) Make of Non skid/ Glazed/ Vitrified tiles:- Kajaria/ Somany/ Orien bell. (e) Make of Galvalume sheets :- TATA Blue Scope/ JSW/ RINL. (f) After completion of work area shall be made clean all spot/ Moss/ Debris shall be removed from site without any extra cost of Govt.

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3353424)

FRIENDS ENGINEERS (BID ID -3362416)