REPAIRS TO FLOORING, PLINTH PROTECTION, CHAJJA IN CERTAIN BLDG AT 24ED AF STATION MANAURI

Amount

Demolition of Brick works, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed

M & L brick work with sub class 'B' old size brick, designation 75, straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for brick work with subclass “B” [Except bricks] Old size bricks, straight or curved on plan exceeding 6 m mean radius built in cement sand mortar in 1:6 complete all as specified & directed by Engineer-in-Charge. Note: Old Bricks shall be used obtained from serial Item No. 01above.

M & L for Brickwork with subclass B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM mortar in 1:4, complete all as specefied and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified

M & L preparation of new plastered surfaces on walls and applying two coats of cement paints complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of newly plastered surface of wall including cornices and apply three coats of white wash complete all as specified & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed.

M & L for 6 to 7 mm thick joint free non-skid ceramic coloured tiles ( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured tile in vertical surface of size 300 mm x 450 x mm x 7-8mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment over & including bedding layer or screed bed in 10 mm thick cement sand mortar 1:3 complete as specified & directed by Engineer-in-Charge.

S & F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixing in opening as specified and shown on drawing made on section 8 of SSR 2004 Part II and all as directed .

S&F factory made solid panel PVC door shutter, 30mm thick (styles) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel strip of 20 mm width stuck Inside with solvent cement for stiles and plain colour PVC sheets for top rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheet beading and joined to gether with solvant cement fixing in the frame at the site and as shown on drawing on Section 8 of SSR 2010 Part II complete as directed by Engineer-in-Charge.

Taking down chowkhat with shutter without taking off shutter from chowkhat area not exceeding 1.5 Sqm each complete all as specified and directed

S&F mild steel cold rolled butt hinges 100 mm medium weight fixed with screws to PVC or wooden frames or with welding in steel frame, ISI marked complete as specified & directed.

S&F extruded aluminium alloy handles anodised 150mm long fabricated type, ISI marked complete all as specified & directed.

S&F aluminium anodised barrel tower bolts extruded section 200mm long, ISI marked complete all as directed.

Taking down 15mm bore GI tubing and connection fixture etc from wall complete.

Taking down 20mm bore GI tubing and connection fixture etc complete.

S&F GI medium grade water tubing/pipe 15 mm bore with alll fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position and removing to store or for re fixing compete all as specified and directed.

S&F GI medium grade water tubing/pipe 20 mm bore with alll fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position and removing to store or for re fixing compete all as specified and directed.

S&F in replacement angle valve of 15 mm bore fancy type CP high pressure screwed for iron pipes or brass ferrule compete all as specified and directed.

S&F in replacement Pillar taps, 15mm bore CP with capstan heads, long body screwed down, screwed for lron pipe high pressure with lettered "hot or Cold" with long shank compete all as specified and directed.

S&F in replacement Stop valves, 15mm bore cast copper alloy, fancy type CP screwed down high pressure screwed both ends for iron pipes or for unions compete all as specified and directed.

S&F in replacement chromium plated cast copper alloy bib taps 15 mm bore fancy type capstan head handles half turn or full turn compete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white colour capacity 10 liters with inlet and outlet, ball valve, handle including cast iron brackets & 32 mm bore PVC flush pipes PVC connection pipe compete all as specified and directed.

S & F in repairs vitreous china WHB white colour of size 600X480 mm flat back or angle back type including angle iron bracket, CP waste coupling, PVC waste pipe 32 mm dia 60 cm long fixed pinning in ends of brackets, compete all as specified and directed.

S&F in repairs Vitreous china squatting pan, orissa pattern, size 580x440 mm white, with integral foot rests including connection to trap and to flushing pipe, anti syphonage pipe including making good to floor with PCC 1:2:4 or cement sand mortar 1:3 complete all as specified and directed by Engr - in - charge.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white colour excluding fixing bolts, flushing cistern & flush pipe) & including seat cover white colour & Jet spray for EWC with CP brass pipe 1 metre long complete all as specified and directed by Engr - in - charge.

Supply and fix in repair 600mmx450mm and 6mm thick bevelled edge looking mirror mounted on 6mm thick backing comercial plywood fixed with CP plug with chromium plated brass screws and cup washer fixed on wall complete.

S&F in repairs Chromium Plated towel rail 600 mm long D type fixed with CP screw & wooden/plastic cleats etc all as specified and directed by engr-in-charge.

S & F in PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed

S&F in repair PVC waste pipe 32/40mm dia 610mm long suitable for WHB or Sinks etc complete all as specified and directed.

S & F in repairs waste coupling CP 32mm for basins etc with long screwed shanks and fly nuts etc complete all as specified and directed.

S & F in repair PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia complete all as specified and directed

S&F in repairs Brass chromium plated shower rose with swivel joints with shower arm 15mm size,195mm long.

S&F 110mm PVC (SWR) bends any radius. complete all as specified and directed.

S & F cast iron bends in (any radious) diminishing pieces or tapers( larger bore measured) in 100 mm dia complete all as specified and as directed.

S&F in repairs CI floor trap, with 125 mm dia SS grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 compete all as specified and directed.

S & F in replacement ball brass valves high pressure of with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe in 20mm bore complete all as specified and directed.

Demolition of cement concrete (reinforced ) of any description and in any position compete all as specified and directed.

M/L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab supported on walls, deck slabs and in shelves and the similar work complete all as specified and directed.

M&L mild steel TMT bars 8 mm dia and over cut to length, bend to shape required, including cranking, bending, spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by the Engineer-in-Charge

S/F in repairs soap dish stainless steel ISI mark complete all as specefied and directed.

S/F in repairs stainless steel grating 100mm dia ISI mark complete all as specefied and directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr - in - charge.

S & F 500ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting including ball brass valves high pressure of with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe in 20mm bore and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

M & L for providing 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection,surface finished even and smooth with using extra cement complete as specified & directed by EIC-Charge.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.

HIMANSHU TRADERS

RK Enterprises