SPL REPAIR TO BLDG NO TR-24, TR-80 AND TR-83 (OR LIVING ACCN) AND ALLIED WKS AT MED REGT AT AKHNOOR MIL STN UNDER GE (S) AKHNOOR

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection, joints filled with bitumen sand mixed 50mm thick, finished even and fair without using extra cement, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggte) as in floors finished even and smooth without using extra cement, complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match Shade, pattern, laying etc, including screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes in cement mortar 1:6 as directed at site, complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement and sand mortar 1:4, finishes even and rough, complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2 1:4:8, 40mm graded crushed stone aggregates as in sub base etc. finished surface even and rough without using extra cement, omplete all as specified and directed.

M&L for chequered cement concrete tiles of size 300x300x25mm thick made of using whtie cement and 12.5 mm stone aggregate having wearing layer of adequate strength not less thn M-30 grade and made by PU mould using vibrating machine approved pattern and colour confirming to IS-13801 laid over 20mm thick screed cement concrete 1:4, complete all as specified and directed.

Providing and laying at or near ground level precast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening and excavation for embedding inside, complete all as specified and directed.

Supply & fixing in position suspended false celling system using GI Grid suspended celling Grid system. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board and to be placed in the gird of GI Grid suspended ceiling grid system duly suspended by 4mm dia GI wire hangers from the pulins of the roof or with fasteners in RCC roof, including dismantling existing ceiling of any type, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, complete all as specified and directed.