Widening and Strengthening of Samadhan Purva to Kakor Kanchausi road via newly constructed Medical College Auraiya (Lenght 4.00 km)

Amount

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

Construction of granular sub-base by roviding coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (By Mix in Place Method)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with high capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

PCC 1:3:6Cement concrete with 2 cm gauge approved stone ballast approved coarse sand cement in the proportion of 1:3:6 including supply of all material T&P etc. required for proper completion of work.

RCC 1:1.5:3R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors & window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 ,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item.

Rainforcement Mild Steel or iron in plain work such as reinforced concrete or reinforcement brick work (when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion fo the work and including supply of all steel and wastage and over lappign and hooks.

Hume Pipe 350mm Providing and laying reinforced cement concrete pipe NP3 for culuverts on first class bedding of granular material including fixing with cement mortor 1:2 but excluding excavation, protection works, backfilling , concrete and masonary works in head walls and parapets clause 1106

Sand filling in plinth including supply of necessary quantity of sand to the site of work and including watering dressing etc. rate to include cost of all material, labour and T&P etc. required for proper completion of the work.

PCC 1:4:8 Cement concrete with 4 cm gauge approved stone ballast approved coarse sand cement in the proportion of 1:4:8 including supply of all material T&P etc. required for proper completion of work.

First class brick work in 1:4 cement and fine sand of 1.25 F.M. mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work.

Pointing 1:2 fine sand Pointing on brick work with cement mortar 1:2 (1Cement : 2 Fine Sand)

R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors & window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item.

Hume Pipe 600mm Providing and laying reinforced cement concrete pipe NP3 for culuverts on first class bedding of granular material including fixing with cement mortor 1:2 but excluding excavation, protection works, backfilling , concrete and masonary works in head walls and parapets clause 1106

Colour washing two coat using approved colouring material of buff blue grey or brown shade or as desired by E-in-Charge including supply of all material, labour & T&P etc required for proper completion of the work.

Providing and laying of interlocking concrete block pavement having thickness 80mm as per drawings and technical specification Clause 1504. Ch 34

SIDDHARTH CONSTRUCTION