GPP/ET/05/2026

Pumping Machinery Providing erecting and giving test of 150 mm Dia Submersible pump set confirming to 1S 8034 and IS 9283 Pump shall be suitable various delivery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 V+-10% 3 Ph 50 Hz A.G. supply. Cable guard thrust Carbone fiber bearing to accept entire hydraulic thrust waterproof winding shall be provided. The pump shall have suitable for direct coupling. The pump shall have suitable outlet as per manufactures design. Antitrust stream lined non return valve shall be provided with pump Suitable suction strainer shall also be Provided 3 Core Single/Double run copper conductor submersible along with the pump rates as per pump up to 8 stage 7.5 HP/10 Stage

Providing lowering, laying and jointing 151 mark G1 pipe of following class and diameter including all local and central taxes, octroi, inspection charges, transportation to stores, etc. complete 65 mm Dia M-Class

Supplying and and erecting copper conductor PVC Insulated flexible cable and pvc sheeted as per I.S 694/1990 of following grade up to 1100 volts 3 Core 2.5 Sq

Supplying and erecting D.O.L starter to operate squirrel cage induction Motor working on 380-400 V3 Phase 50 Hz with no volts coil and overload element with necessary material and connected to supply etc. complete Starter with original steel enclose

Providing and erecting analog type moving iron Voltmeter AC current 0 to 30 a direct range 500 Volts range flush type erected on provided M.S box and connected supply. Providing and erecting analog type moving iron Ammeter A.C. Current 0 to 3 direct range with 500 Volts Accuracy class 1.50 flush type on provided M.S box/Panel and connected with necessary Panel Fabrication-Gl sheet of thickness given below to be used for fabrication of boxes. Panel

Volts Accuracy class 1.50 flush type on provided M.S box/Panel and connected with necessary Panel Fabrication-Gl sheet of thickness given below to be used for fabrication of boxes. Panel

board etc. including cutting, bending, drilling, welding, cleaning, degusting and painting with one coats of red lead paint and two coats of enamel paint 16 SWG

Providing and Making UPVC/MDPE Pipe Consumer Service Connection on Distribution main by drilling hole with suitable means including all labour

Syntex Tank Providing structural steel work in rolled sections like joists, channels, angles, tees, etc as per detailed design and drawings or as directed by engineer in charge including foxing in position without connecting plates braces, etc and one coat of anticorrosive paint and over it two coats of oil painting, of approved quality and shade, etc. complete