Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹16.9 LAWARDED | AWARDED |
Tender Value
₹20 L
EMD Value
₹42,185
Closing Date
23 May 2025, 9:30 pmClosed
Directorate of Municipal Administration
Zonal No.7 W. No. 33 Anandnagar Govt.Kannada Primary School to provide water system by drilling a bore-well and installing a pump in the back roads.
DMA/2025-26/OW/WORK_INDENT37814/CALL-2
DMA/2025-26/OW/WORK_INDENT37814/CALL-2
Open
Other Works
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
₹500
₹42,185
9 May 2025
9 May 2025
21 May 2025
Zonal No.7 W. No. 33 Anandnagar Govt.Kannada Primary School to provide water system by drilling a bore-well and installing a pump in the back roads.
Geophysical Investigation of site for sinking Borewell Geophysical Investigation of site for sinking Borewell for supplying drinking water to the habitation either through a hand pump, Mini Water Supp...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern. Fixing of casing pipes, collars and cap with n...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern. Fixing of casing pipes, collars and cap with n...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern. Fixing of casing pipes, collars and cap with n...
Supply of ISI Mark nominal bore, plain end steel casing pipe-grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest amendments, electrical resistance welded steel tube material ...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Providing, supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3 Phase, SS Bowl & Impeller with Low volt Motor as per specifications, as per...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 m...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Supply of malleable cast iron galvanised pipe fittings confirming to IS 1879/87 with latest amendments and material used for manufacture of malleable CI fittings shall confirm to any of grade specifie...
Supply of malleable cast iron galvanised pipe fittings confirming to IS 1879/87 with latest amendments and material used for manufacture of malleable CI fittings shall confirm to any of grade specifie...
Supply of malleable cast iron galvanised pipe fittings confirming to IS 1879/87 with latest amendments and material used for manufacture of malleable CI fittings shall confirm to any of grade specifie...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments a)50mm size
Supply and delivery at site brand new best make outdoor type board consisting of two units of galvanized mild steel tubes heavy class (C-Class) as per IS 1239 (Part-I) 1990 with latest amendments with...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.
Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.
Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. with necessary materia...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
HESCOM Charges Deposits
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
20mm dia GI Tee (UNI SR 2023-24 Vol-I / Page No.130 / Item No.11.9.2)
Providing GM gland cocks tested against hydraulic pressure of 20 Kg/m² with ISI mark. For 20 mm dia GM gland cocks (UNI SR 2023-24 Vol-5 / Page No.134 / Item No.11.19.2)
50mm dia GI Elbow (UNI SR 2023-24 Vol-5 / Page No.129 / Item No.11.7.6)
50mm dia GI Collar (UNI SR 2023-24 Vol-5 / Page No.129 / Item No.11.6.6)
Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (UNI SR 2023-24 Vol-3 / Page No.17 / Sl.no3.1 Ref. to MORTH & Spec.301)
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick / stone masonry including rounding off corners wherever required s...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. (UNI SR 2023...
RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...
Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same comp...
Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI collar: (UNI SR 2023-24 Vol-5 / Page No.129 / I No. 11.6.6 )
Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: 150 mm dia GI elbow (UNI SR 2023-24 Vol-5 / Page No.129 / I No....
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. 150 mm dia GI BEND (UNI SR 2023-24 Vol-5 / Page No.144 / I No. 11.8....
Providing GM (copper alloy) wheel valves/ check valve confirming to IS 778/1990 Class-I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle scr...
Providing GM gland cocks tested against hydraulic pressure of 20 Kg/m² with ISI mark. For 15 mm dia GM gland cocks (UNI SR 2023-24 Vol-5 / Page No.134/ I No. 11.19.1)
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .