Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹11.5 L+₹86,857 (8.13%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GLOBAL AQUATECH L1 | M/s BIMAL WATER SOLUTIONS PRIVATE LIMITED L2 |
|---|---|---|---|---|---|
| 1.00 | Design, Supply, Installation, Testing & Commissioning of RO Water Treatment Plant of Capacity 1000 litres/ hour at Govt. Bone & Joint Hospital, Jammu. The scope of work/technical specifications include the following:
Raw water Feed pump, Multigrade sand bed filter, Activated carbon filter, Pressure gauges to check differential pressure. (A,B,C,D,), Anti scalant Dosing System, Micron filter, R.O. membrane , SS Vertical High Pressure Pump with motor, MS POWDER COATED for mounting R.O. equipments and controls, HP Switch & LP Switch for high Pressure pump.
Acceptable Makes: KENT/ BLUE MOUNT/ EUREKA FORBES/ RUBY
as per ANNEXURE “A” TECHNICAL SPECIFICATION/ SCOPE OF WORK at serial no. 1 | 1 | JOB | 3,60,000 ₹3,60,000 | 2,55,000 ₹2,55,000 Lowest |
| 2.00 | Design and SITC of Chiller Plant (Offline) of 5 TR Capacity with type Air Cooled water chiller and flow rate of chilled water is 1000 LPH of grade SS-304 fitted with Copper Tubes and Compressor and StainlessSteel Transfer Pumps of nationally reputed make- Daikin/ Blue Star/ Voltas having 2000 litres SS-304 insulated tank.
Pipes along with fittings: The pipes shall be SS of different diameters as 2”, 1.5”, 1” and ½” of lengths (Approx. 200 meters) with pipes having working pressure of 320 PSI at 23 degrees using solvent welded CPVC fittings and CPVC cement solvent for joining of pipes. The Test Pressure shall be 150 PSI or 10 bar for 1 hr. The insulating material shall be of closed cell Elastomeric Nitrile rubber of thickness not less than 19 mm. The product shall have a temp. range from - 400 deg c to 1050 deg c and density not less than 0.06gm/cubic cm. Insulating material shall be sleeved on the pipes. All longitudinal and transverse joints shall be sealed continuous over the piping and fittings. All outside pipes insulated with nitrile rubber shall be covered with fibreglass fabric. The horizontal pipes shall be given support at intervals of 3 feet for diameters of 1 inch and below and at 4 feet intervals for large pipes. The fibre glass fabric shall be applied with one coat of fireproof epoxy or acrylic compound. Connection work only for connection of RAW water tank to RO System and Storage Tank. Make ISI marked including foundation.
The job shall include all the equipment’s of the plant housed in a shed and any other items/ works not specifically mentioned above but are necessary for successful commissioning of the plant. | 1 | JOB | 6,62,000 ₹6,62,000 | 4,74,257 ₹4,74,257 Lowest |
| 3.00 | i) Properly insulated SS pipeline without any joint of 01 inch dia from top floor to ground Floor-2 runs x 100 mtrs length each with providing & fitting of 25 points with Tap system with all allied fittings/ accessories at designated places as per requirement.
ii) Tapping of the water pipe connection for input to the plants by providing & laying of G.I. pipe of 25 mm/40 mm dia. along with valves at both ends -Approx. 30 mtrs /as per site requirement. | 1 | job | 28,000 ₹28,000 Lowest | 2,50,000 ₹2,50,000 |
| 4.00 | i) Providing & laying of 06 Sq.mm, 4Core Aluminium Armoured Cable (Polycab/Havells/KEI) for Offline Chiller Plant and 06 Sq.mm, 2 Core Aluminium Armoured Cable (Polycab/Havells/KEI) for RO Plant-Approx. 200 mtrs. length
ii) Providing & Fitting of 63 Amps Main Switch (L&T/Havells/Scheinder)-02 Nos.
iii) Earthing of complete equipment of both the Plants.
iv) Complete insulation of all piping.
Before bidding, the intending bidder must visit the site to get fully acquainted with the site conditions. | 1 | job | 18,000 ₹18,000 Lowest | 1,75,600 ₹1,75,600 |
Tender Value
₹12.2 L
EMD Value
₹25,000
Closing Date
26 Feb 2026, 4:00 pmClosed
XEN MECHANICAL AND HOSPITAL DIVISION JAMMU
XEN MECHANICAL AND HOSPITAL DIVISION JAMMU
Design, Supply, Installation, Testing Commissioning of 1000 LPH Capacity RO Water Plant and allied works at roof top of Govt. Bone Joint Hospital, Jammu.
2026_PWDJK_302868_1
MHDJ/e-NIT 357 of 2025-26
Open Tender
Machineries/ Mechanical Engg Items
Turn-key
45 days
bone and joint hospital jammu
as per e nit
2 documents required · 2 mandatory
₹1,000
XEN MECHANICAL AND HOSPITAL DIVISION JAMMU
₹25,000
9 Mar 2026
11 Feb 2026
27 Feb 2026
11 Feb 2026
26 Feb 2026
12 Feb 2026
11 Feb 2026 - 18 Feb 2026
Select, Excess (+), Less (-) Less (-)
Tender Inviting Authority: EXECUTIVE ENGINEER, MECHANICAL &-HOSPITAL DIVISION , JAMMU
Design, Supply, Installation, Testing & Commissioning of 1000 LPH Capacity RO Water Plant and allied works at roof top of Govt. Bone & Joint Hospital, Jammu.
MHDJ/e-NIT 357 of 2025-26 Dated: 11.02.2026 Due : 18.02.2026
Name of the Bidder/ Bidding Firm / Company :
Sl. No. 0 Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATES INCLUSIVE ALL TAXES Excise Duty GST Rs. P Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category
1 Design, Supply, Installation, Testing & Commissioning of RO Water Treatment Plant of Capacity 1000 litres/ hour at Govt. Bone & Joint Hospital, Jammu. The scope of work/technical specifications include the following: Raw water Feed pump, Multigrade sand bed filter, Activated carbon filter, Pressure gauges to check differential pressure. (A,B,C,D,), Anti scalant Dosing System, Micron filter, R.O. membrane , SS Vertical High Pressure Pump with motor, MS POWDER COATED for mounting R.O. equipments and controls, HP Switch & LP Switch for high Pressure pump. Acceptable Makes: KENT/ BLUE MOUNT/ EUREKA FORBES/ RUBY as per ANNEXURE “A” TECHNICAL SPECIFICATION/ SCOPE OF WORK at serial no. 1 0.000 JOB Excess(+) Full Conversion INR
2 Design and SITC of Chiller Plant (Offline) of 5 TR Capacity with type Air Cooled water chiller and flow rate of chilled water is 1000 LPH of grade SS-304 fitted with Copper Tubes and Compressor and StainlessSteel Transfer Pumps of nationally reputed make- Daikin/ Blue Star/ Voltas having 2000 litres SS-304 insulated tank. Pipes along with fittings: The pipes shall be SS of different diameters as 2”, 1.5”, 1” and ½” of lengths (Approx. 200 meters) with pipes having working pressure of 320 PSI at 23 degrees using solvent welded CPVC fittings and CPVC cement solvent for joining of pipes. The Test Pressure shall be 150 PSI or 10 bar for 1 hr. The insulating material shall be of closed cell Elastomeric Nitrile rubber of thickness not less than 19 mm. The product shall have a temp. range from - 400 deg c to 1050 deg c and density not less than 0.06gm/cubic cm. Insulating material shall be sleeved on the pipes. All longitudinal and transverse joints shall be sealed continuous over the piping and fittings. All outside pipes insulated with nitrile rubber shall be covered with fibreglass fabric. The horizontal pipes shall be given support at intervals of 3 feet for diameters of 1 inch and below and at 4 feet intervals for large pipes. The fibre glass fabric shall be applied with one coat of fireproof epoxy or acrylic compound. Connection work only for connection of RAW water tank to RO System and Storage Tank. Make ISI marked including foundation. The job shall include all the equipment’s of the plant housed in a shed and any other items/ works not specifically mentioned above but are necessary for successful commissioning of the plant. 0.000 JOB Excess(+) Full Conversion INR
3 i) Properly insulated SS pipeline without any joint of 01 inch dia from top floor to ground Floor-2 runs x 100 mtrs length each with providing & fitting of 25 points with Tap system with all allied fittings/ accessories at designated places as per requirement. ii) Tapping of the water pipe connection for input to the plants by providing & laying of G.I. pipe of 25 mm/40 mm dia. along with valves at both ends -Approx. 30 mtrs /as per site requirement. 0.000 job Excess(+) Full Conversion INR
4 i) Providing & laying of 06 Sq.mm, 4Core Aluminium Armoured Cable (Polycab/Havells/KEI) for Offline Chiller Plant and 06 Sq.mm, 2 Core Aluminium Armoured Cable (Polycab/Havells/KEI) for RO Plant-Approx. 200 mtrs. length ii) Providing & Fitting of 63 Amps Main Switch (L&T/Havells/Scheinder)-02 Nos. iii) Earthing of complete equipment of both the Plants. iv) Complete insulation of all piping. Before bidding, the intending bidder must visit the site to get fully acquainted with the site conditions. 0.000 job Excess(+) Full Conversion INR
Total in Figures
Quoted Rate in Figures Select
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_982998.xls
BOQ • 0.28 MB
enitbj.pdf
PDF • 0.78 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .