LJN Div.:- Provision for Construction of New Mechanized Laundry at Gomti Nagar

A-CPWD-DSR-2021

Item Breakup - A-CPWD-DSR-2021

of 88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 63 18.7.1 15 mm nominal dia Pipes Metre 200 255.9 51180 64 18.7.2 20 mm nominal dia Pipes Metre 300 325.1 97530 65 18.7.3 25 mm nominal dia Pipes Metre 300 408.55 122565 66 18.7.4 32 mm nominal dia Pipes Metre 500 500.95 250475 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 67 18.15.1 15 mm nominal bore Each 10 303.85 3038.5 68 18.15.2 20 mm nominal bore Each 10 327.95 3279.5 Providing and fixing brass stop cock of 18.16 approved quality : 69 18.16.2 20 mm nominal bore Each 5 327.95 1639.75 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 70 18.18.2 20 mm nominal bore Each 5 397.45 1987.25 18.23S C.I./DUCTILE IRON PIPES & SPECIALS Providing and laying S&S centrifugally cast 18.27 (spun) iron pipes (Class LA) conforming to IS - 1536 : 71 18.27.1 100 mm dia pipe Metre 20 1210.5 24210 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES LUCKNOW-NER-DIVISION-ENGINEERING/NORTH EASTERN RLY Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 18.32 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.32.1 With common burnt clay F.P.S.(non Each 4 1712.15 6848.6 72 modular) bricks of class designation 7.5 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm 18.33 nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non Each 4 10102.5 40410 73 modular) bricks of class designation 7.5 18.48 Providing and placing on terrace (at all floor Litre 50000 9.7 485000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 74 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 18.58.1.2 125 mm nominal dia with 25 mm waste Each 20 45.25 905 75 hole 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 76 19.1.1 100 mm diameter Metre 20 375.75 7515 77 19.1.2 150 mm diameter Metre 20 591.4 11828 21.0 ALUMINIUM WORK LUCKNOW-NER-DIVISION-ENGINEERING/NORTH EASTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 500 433.95 216975 or dyed to required shade according to IS: 78 1868, Minimum anodic coating of grade AC 15) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 100 965.1 96510 79 lamination on one side and balancing lamination on other side 21.17 Providing and fixing anodised aluminium Kg 50 560.85 28042.5 grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless 80 steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 22.0 WATER PROOFING Grading roof for water proofing treatment 22.14 with 22.14.3 Cement mortar 1:4 (1cement : 4 coarse cum 14.8 13378.15 197996.62 81 sand) Total 16324229.22