PROVN OF KOTA STONE IN CHILDREN SCHOOL AND SPECIAL REPAIR TO TOILET IN BLDG NO P-08 AND P-10 UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L cement concrete in sub base of floors 1:4:8 type D-2 using 40 mm graded stone aggregates complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick/stone wall, ceiling etc incl raking outs joints hacking for key scrubbing with water complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work (Internal Surface) including finished even and smooth without using extra cemnet complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces on brick masonry (External surface) including finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M & L Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M & L window guard bars, plain, let in and fixed independently in steel framing, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.

S&F sheet glass, ordinary quality and glazing with beads fixed with metal panel pins in square n exc 0.5 sqm in each pane with 3 mm thickness complete all as specified and directed.

Taking down door chowkaht or frame of window and ventilator of any description area n exc 1.50 Sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down door chowkaht or frame of window and ventilator of any description area exc 1.50 Sqm n exc 4.00 sqm each without taking off shutters from the frame complete all as specified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails, MS frame shall be covered with heat moulded lain colour PVC Ç'channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per secification & drawing.

S&F Butt hinges, medium weight , cold rolled mild steel, and fixed 100 mm complete all as specified and directed.

S&F 200 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning 20 mm bore complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning 25 mm bore complete all as specified and directed.

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor.

S&F 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down for iron pipeand fixed complete all as specified and directed.

S&F in repairs PVC valveless,syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects flushing, brakects flushing pipe complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white , flat back, size 550mmx 400mm but including brackets , coupling and waste pipe complete all as specified and directed.

S&F in repair Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm.

S & F in repairs Vitreous China wash down water closet pan (Pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F in repair vitreous china Squatting pan 'Orissa' pattern water closet white size 580mm x 440 mm with integral foot rest (excludinfg flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc.

S&F in repair vitreous China urinals, bowl type(back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 25 mm bore or union and fixed.

S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore or union and fixed.

S&F in repair angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore

S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union ,125mm size.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 25 mm dia and fixed (Minimum Weight 210 gms).

S&F in reapir 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary earth work.

S&F in reapir 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary earth work.

S&F in reapir 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F in reapir 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F in reapir 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal.

S&F in reapir 110 mm PVC (SWR) junction single, (Single T) equal or unequal.

S&F in reapir 75 mm bore PVC (SWR) junction single, (Double T) equal or unequal.

S&F in reapir 110 mm bore PVC (SWR) junction single, (Double T) equal or unequal.

S&F 110mm bore PVC (SWR) vent cowl.

S&F 75 mm bore PVC (SWR) bends any radius

S&F 110 mm bore PVC (SWR) bends any radius

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L Cement concrete filling and mass concrete in suken portion type E-2 1:5:10 ( 40 mm graded aggregates ) mixing water proofing compound 3% by wt (WPC measusred and paid separately)

Supply only Integral water proofing compound.

Disconnecting & Dismantling water tanks, exceeding 500 litre and not exceeding 1000 litre capacity complete all as specified and directed.

S&F Rotatinal moulded polyethylene water storage tanks capacity 1000 ltr double layed (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S&F Brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

M&L for preparing new plastered surfaces and applying three coat of white wash on walls complete all as specified and directed.

M&L for preparing new plastered surfaces and applying three coat of white wash on Ceiling complete all as specified and directed.

M&L preparation of newly plastered surface wall and applying two coats of cement base paint of any tint over a coat of primer complete all as specified and directed.

M&L preparing new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed.

Dismentaling of floor hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B0 under floor tiles complete all as specified and directed.

M&L Non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. .

M&L coloured ceramic tiles (450x300x7)mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick,size of kota stone 450x550 mm over and including 300 mm thick wide white marble board over and incl cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm screed bed in CM 1:6 complete all as specified and directed.

M&L 50 mm thick plain cement concrete type C-1 1:3:6 (Using 20 mm graded stone aggergates ) as in plinth protections finished even and fair with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar.(1:3 bitumin :sand) complete all as specified and directed.

M&L screed bed or bedding layer or mortar 15 mm thick over roof finishes in CM 1:4 with water proofing compound finished even and smooth w/o using extra cement complete all as specified and directed. (Note : water proofing compund shall be paid and measured saparately)

M&L painted cement plastered surfaces with one coat of cold applied bituminous primer @ 0.40 ltr/sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/Sqm, reinforced with polyster non wove fabric (weighing not less than 150 gms/Sqm). It shall be laid by torch application. side overlaps shall be 75 mm and the end lap shall be 100 mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60 cm and then inserted inside the parapet grove. This shall be finished by a membrane flashing.

M&L preparation of APP based polymeric surface and applying two coat of bituminous aluminium paint complete all as specified and directed.

M&L mild steel deformed or twisted bar (TMT) 10mm dia and over cut to length bent to shape required including cranking bending spirally for columns hooking ends and binding with and mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L providing precast cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in cover slabs (for manholes etc) and shifting to different places and set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M & L machine cut kota stone slab on vertical surface of wall, riser etc in single piece n exc 1.5 m in lenth of 20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC type D-2, 1:4:8 (40 mm graded stone aggregate) as sub base of flooring complete all as specified and directed.

M&L for 25 mm thick sand cushion layer complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F chicken wire mesh of aperature size of 20x20 mm for reinforcement/bonding in rendering on any surface.

S & F rolled mild steel sections as in main and cross beams, posts, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc Fe-290 (Gde-E-165)

M&L roof padding in PCC 12:4 type B-0 ( using 12.5mm size graded stone aggregate) laid to average consolidated thickness of 50mm to provide a slope finished even and smooth without using extra cement complete all as specified and directed.

Taking down carefully surface aluminium or copper point wiring from existing recessed PVC conduits (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces of walls even and smooth using CM 1:3 as required.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into existing concealed conduit and terminated for mounting 3mm thick ivory colour laminated sheet, switches, sockets, fan regulators as required for one light point controlled by one switch.

All as per item No 86 above but one fan point controlled by one switch.

All as per item No 86 above but one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per item No 86 above but one socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into into existing concealed conduit and terminated in and including metal flush boxes for mounting 3mm thick ivory colour laminated sheet for one socket point 16 Amps controlled by one switch.

S&F angle holder, insulated polycarbonate body with back plate complete.

S&F switch piano flush button single pole one way 6 Amp complete.

S&F switch piano flush button single pole one way 16 Amp complete.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete.

S&F ceiling rose 3 plates polycarbonate body complete.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways.

S&F MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete.

S&F MCBs of 'C' series double pole 40 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories size 2X6 sqmm + 1X6 sqmm earth wire in 20 mm dia conduit.

Taking down carefully MCB DB any type and size including all fittings complete etc and making good

Taking down carefully submain wiring any type and size including all fittings complete etc and making good

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

Taking down carefully storage type water heater (geyser) any make, opening up geyser of capacity 25/50 litre, checking defect, cleaning, taking out u/s parts and re-assembling after carrying out repair / renewal work including nuts / bolts / washers / gaskets / fusible plug etc including refixing of geyser with all electric connecting all as required. (Note - U/s parts shall be measured separately under relevant item of schedule as supply only).

Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.

Supply only heating element 2.0 KW, 230 volts, ISI marked suitable for 25/ 50 litre capacity geysers of any type as required.

Supply only thermostat ISI marked suitable for 25/50 litres geysers as required.

Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.

Repair of inner copper tank of geysers 25/50 litre capacity with gas welding not exceeding 5 mm thick to make it leak proof complete.

Renewal of brass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete.

M&L for painting of geyser 25/50 litre with two coats of synthetic enamelled white paint after removing old paint and preparation of surface.

S & F 20 amps single pole and neutral socket outlet with 2 pole and earty metal enclosed plug top in poweder coated CRCA steel ssheet enclosre recess mounted with chained matel cover for socket out let with and incl one no single pole MCB 20 Amps .

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Renewal of PVC insulated over all PVC sheathed three core copper cable of size 2.5 sqmm complete.

Schedule of Credit

M/s Bhavesh Construction Company

MSR INFRATECH

ABHI CONSTRUCTIONS

JAGDAMBA CONSTRUCTION COMPANY

M/S JALANDRA CONSTRUCTIONS

S.R.Enterprises

DEEPENDRA SINGH SHEKHAWAT

Baradwal Construction Company

Smita Constructions