WATER SUPPLY 2025-26

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers. Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil.SS20B (TWAD SOR 2025-2026, Pg No.212, Unique Code WD-W07020 to WD-W0708) 40mm to 160mm dia PVC Pipe

Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification.

Supplying and fixing of 5.0 HP Air Compressor with 3 phase 5HP Motor - 1440 RPM etc Complete, Including Cost and conveyance charges, loading and unloading charges, Providing Motor bed and Motor Hdpe Hose Pipe erection Charges…

Supply of 40mm dia flex HDPE PIPES FOR SUB-MERSIBLE PUMP IN BOREWELL Class-5 (1 MPa or 10 kg./cm2 pressure) suitable for air compressure motor with water line including cost and conveyance of pipe to the site etc complete as per std specification. (PWD SOR 2025-26, Pg No.168, Unique Code: M-1057)

Supply of 20mm dia flex HDPE PIPES FOR SUB-MERSIBLE PUMP IN BOREWELL Class-5 (1 MPa or 10 kg./cm2 pressure) suitable for air compressure motor with water line including cost and conveyance of pipe to the site etc complete as per std spn (PWD SOR 2025-26, Pg No.168, Unique Code: M-1054)

Supplying fixing of 50 mm dia G.I pipe B class cut into 3m length and threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specification. (TWAD SOR 2025-2026, Pg No.30, Unique Code WD-M0489)

Supplying fixing of 40mm dia G.I pipe B class cut into 3m length and threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specific (TWAD SOR 2025-2026, Pg No.30, Unique Code WD-M0488)

Supplying fixing of 20mm dia G.I pipe B class cut into 3m length and threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specifi (TWAD SOR 2025-2026, Pg No.30, Unique Code WD-M0485)

Supplying of 63 mm dia PVC 6 KSc pipe with ISI marked including transporting the same to the site directed by the departmental officers etc complete as standard specifications (TWAD SOR 2025-2026, Pg No.5, Unique Code WD-M0010)

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., (2000lit Hdpe Water Tank) (TWAD SOR 2025-2026, Pg No.99, Unique Code WD-M1419)

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Supply and fixing of RCC precast slab in cement concrete 1:1.5:3 mix (One cement one and half Crushed Stone Sand and three aggregate) using 20 mm ISS metal including cost of moulding charges mixing, laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but including cost of reinforcement (50mm thick)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Lowering of 63 mm dia PVC rigid pipes and specials to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing.etc complete (TWAD SOR 2025-2026, Pg No.191, Unique Code WD-W0424)

Supply and Delivery of DOL Starter with Single phasing preventor with ammeter and sutable panel board including all cost of conveyance charges etc complete (TWAD SOR 2025-26, Pg No.135, Unique Code WD-M1921)

Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing (Electrical SOR 2025-26, Pg No.62, SD 147)

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with1No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection (Electrical SOR 2025-26, Pg No.55 SD 128)

Supply and run of 4 of 4 sqmm (56/0.3) PVC insulated Single core unsheathed Cu.Conductor of 1100 v grade on 7/20 GI bearer wire for service connection mains (Electrical SOR 2025-26, Pg No.34 SD 67)

Supply and run of 4 of 4 sqmm (56/0.3) PVC insulated Single core unsheathed Cu.Conductor of 1100 v grade in 20 mm GI Pipe (Class ' B') Bend at Both ents with necessary angle iron up right and Supports (Electrical SOR 2025-26, Pg No.35 SD 72)

Supply and fixing of 32 Amps fuse unit including all cost and Conveyance of materials and labour charges etc complete as per std specification

Supplying and fixing steel door double lead made out of 18 gauge M.S. sheet outer frame of 40 mm x 40 mm x 6 mm 'L' angle linner frame of 30 mm x 30 mm x 5 mm 'L' angle cross stiffener M.S. flat 25 mm x 6 mm with aldrop 1 No, tower bolts 4 Nos. two handlde and six hold fast complete welded and revitted and painted one coat of red oxide paint including cost and conveyance of all materials and labour etc., complete

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Refilling the trenches with excavated earth (other than sand) in layers and watering, ramming and consolidation as per standard specification etc complete and as directed by Engineer in charge (TWAD SOR 2025-2026, Pg No.212, Unique Code WD-W07020) 63mm dia PVC Pipe

Please Enable Macros to View BoQ information