Development of Government College and Sports Ground at Bhenslore, Nani Daman.(E-30155)

Amount

Civil work

Providing material and labour, machinery for Excavation of foundation/utilities upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff within the site for all lead, all lift/ depth anywhere from the site etc complete as directed by Engineer in charge. for all kind of soil.

Providing material and labour for Excavation of foundation/utilities from 1.5 mt to 3.0 mt depth including sorting out and stacking of useful materials and disposing off the excavated stuff with in the site for all lead, all lift/ depth (excluding hard rock) anywhere from the site etc complete as directed by Engineer in charge. for all kind of soil.

Providing material and labour for Excavation of foundation/utilities from 3 mt to 5 mt depth including sorting out and stacking of useful materials and disposing off the excavated stuff with in the site for all lead, all lift/ depth (excluding hard rock) anywhere from the site etc complete as directed by Engineer in charge. for all kind of soil.

Providing material and labour for Filling in foundation, plinth and plot filling with murrum (brought from out side) CBR value higher than 8% in layers of 20cm. thickness including watering, ramming and consolidating etc complete as directed by Engineer in charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means)

Disposing off the un-used excavated earth for all lead and lift/ depth out side the site at non objectional place as directed by Engineer in charge.

Providing material and labour for Filling in plinth with coarse sand with CBR value higher than 8% under floors or base of foundation including watering ramming, consolidating and dressing etc complete as directed by Engineer in charge.

Providing and filling in rubbles in foundation, in plinth and for plinth protection, filling, with quarry spalls covering and leveling the surface in layers of 20 cm thickness stone/metals or stone chips, including watering, ramming well and consolidating each layer using minimum 100mm cut size stones. (Ramping by manual or mechanical means)

Carrying out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concentration inclusive of one litre chemical emulsion application at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Dewatering in all sorts of soil and soft murrum, hard Murrum and boulders, Soft Rock, Hard Rock including removal of surface water, water from foundation, trenches and ground water as nessesary to performed construction required by the contract in accodance with the specification.

PCC and RCC works-Providing and laying cement mortar in 1:6 (1-Cement : 6-coarse sand) proportion.

Providing material and labour for laying Plain cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) in Foundation, Plinth, Pavement, Road work including cost of formwork, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge.

Providing material and labour for laying in position batched and machine mixed design controlled cement concrete M25 from below plinth upto floor V level produced in batch mix machine, using cement content as per approved design mix, including pumping of concrete to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Foundation, footings, base of columns, pavement, grade slab, roads and Mass concrete including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing material and labour for laying in position batched and machine mixed design controlled cement concrete M25 from below plinth upto floor V level produced in batch mix machine, using cement content as per approved design mix, including pumping of concrete to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Walls, including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing material and labour for laying in position batched and machine mixed design controlled cement concrete M25 from below plinth upto floor V level produced in batch mix machine, using cement content as per approved design mix, including pumping of concrete to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. using graded black trap stone aggregates of maximum 20mm nominal (down graded) size including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 for reinforced concrete work in Slabs, landing, lintels, shelves, Balconies and Cantilever including cost of expose/fair finish Formwork including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. exluding cost of reinforcement. Height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Foundation, footings, base of columns, pavement, grade slab, roads and Mass concrete all work upto plinth level, including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) Including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.exluding cost of reinforcement.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in laying in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts all work upto plinth level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in laying in Columns, Fins, Pillars posts, Rectangular polygon in plan and struts all work above plinth and upto floor V level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in laying in Walls all work upto plinth level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in laying in Walls all work above plinth and upto floor V level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Slabs, landing, lintels, shelves, Balconies and Cantilever all work upto floor V level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of expose/fair finish Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge. Height of propping and centering below supporting floor to ceiling not exceeding 4.0 M.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Beams, Plinth beam, Girders, Lintels and Cantilever all work upto plinth level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge. Height of propping and centering below supporting floor to ceiling not exceeding 4.0 M.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in Beams, Plinth beam, Girders, Lintels and Cantilever all work above plinth and upto floor V level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge. Height of propping and centering below supporting floor to ceiling not exceeding 4.0 M.

Providing and laying in position Ready Mixed M25 grade concrete for reinforced cement concrete work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying in stair and landing all work upto floor V level including cost of admixtures in recommended proportions as per IS: 9103 as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) including cost of Formwork with centering, new steel/plywood shuttering, strutting, steel scaffolding and propping etc. and removal of form for in situ reinforced concrete and plain concrete work in with all lead and lift complete as directed by engineer in charge.

Extra for additional height of propping and centering where the height of propping and centering exceeds 4.0 mt. Between supporting floor two ceiling including temporary brick or stone pillars for supporting as required. (I) Height more than 6 mt & upto 8.0 mt.

Providing and Core cutting work in Stone/RCC/Brick structures of maximum 400mm depth upto 150mm Dia with required core-cutting wet drilling, fastners tools, labour and supervision etc complete.

Providing material and labour for fixing in position PVC pipe sleeves 75-160mm Diameter - 6Kg/cm2 and length as per design for following diameters for services wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying etc complete for all floors, all height as directed by engineer in charge. Open ends of the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Pipe sleeve shall be removed before water proofing or grouting (at rain water down take location).

Rebaring: Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into Stone masonry/RCC wall (with Hilti RE500V3 or Fischer FIS EM or Equivalent) as per manufacturer's specification and structural consultant's specification and fixing rebar of the required diameter subsequently upto 25 mm dia. drill hole and 450mm anchoring depth. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.

Providing material and labour for fixing chemical anchor medium to heavy duty injection adhesive for Anchor fixing in Dry conditions and HILTI HIT-HY 200 + HIT-V rods of size 16mm x 300mm of HILTI or equivalent as per drawing or as instructed by EIC. The system should be made of two foils consisting of resin and Hardener foil pack. The system can be used for threaded rods HIT-V rods or equivalent rods. The installation and the setting instructions should be strictly followed as per the manufacturers recommendations. Rate shall be inclusive of injection adhesive and fastner rod of same make.

Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi rigid UV resistance with high performance laminated closed cell polythene foam joint filler in sheet foam as directed, etc. complete.

Providing material and labour for filling joint with elastomeric joint sealant two component, high performance polysulfide formulation conforming to BS:4254 and ASTM C 920 having weathering resistance to ultra-violet rays and shall exhibit shore A hardness of 25 and have movement accommodation factor 25% including using of compatible primer of approved standard for at all floors, any lead and lift etc complete as directed by Engineer In charge.

Providing and fixing 150 mm wide Aluminum flutted strips 3.15 mm thick sheet covering over expansion joints with screws as per design.

Providing & laying weep hole in Abutments, walls and returns by using A.C. pipe of 100mm including laying in proper grade and jointing the completed as per detailed specification.

Reinforcement and Steel works- Supplying, cutting, bending, binding and placing in position TMT Bar Fe 500D reinforcement in all diameter confirming to relevant I.S. standards as per ISS 2502 and IS 1786 including cost of binding with GI wires and placing in position complete upto floor two level inluding Providing anticorrosive treatment to HYSD/Fe 500D bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993 at approved plant including testing of coating as per relevant IS, before bringing the coated bars on site including To & Fro transportation of bars for sending at plant site etc. complete, for HYSD bars. (Brands: Tata, Jindal)

Extra for additional lift of reinforcing steel for all R.C.C. work above floor two level.

Steel works: Providing material and labour for fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled Steel Sections, ISMB, ISMC, UC, H-Section, Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bars, Angles, MS Sheet, Girder, Beam, cattle trap, deep threaded MS bolts. All confirming to latest relevant IS codes for the work of steel structures like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets, monkey ladder, cattle trap, rungs, Roof canopy, fencing posts, M.S. Screen etc. including straightening, cutting, bending, bolting and welding the members including necessary scaffolding/ staging etc. complete and comprising of Profile Cutting, Smooth grinding/ machining of edges/ faces/ all welding joints; Necessary welding; Machine drilling of holes for joining/ anchoring; dry sanding, degreasing (wet cleaning) & preparation of rustfree surface manually or mechanically, metal putty to make the surface even and smooth. The Contractor shall prepare shop drawing as per GFC drawing and as per actual site condition and get approved before execution by EIC. (Standard measurements will be paid for as actual cut length used at site) .(Brand: Tata Steel, Jindal)

Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete.

Masonary works--Providing material and labour for laying Brick work using common burnt clay building Conventional bricks having crushing strength not less than 35 kg/SqCm in foundation and plinth in Cement Mortar 1:5 (1- Cement : 5 -fine sand) in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level (B) Cement Mortar 1:5. (1- Cement : 5 -fine sand) in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing material and labour for (i) Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation, plinth and superstructure above plinth level upto floor two level, in any shape and thickness including finishing, racking of joints, curing, scaffolding for all height all level etc. complete as directed by engineer-in-charge.

Providing and laying Sandbase autoclaved aerated cement blocks masonry with 150/200/225/230/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge at all heights. (The payment of RCC band and reinforcement shall be made for seperately).

Door Window, Façade works - Providing and fixing frames/shutters/louvers for any type of aluminium works in door/window/partition made out of heavy weight extruded aluminium sections of approved make having minimum 50 micron pure polyester Powder Coated coating of approved shade, texture & colour for all floors, levels, heights, shapes, sizes including cutting, bending, crimping, fabricating in best workmanship manner etc excluding glass works as per the drawing and as directed by Architect or EIC. Including 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile and compatible EPDM rubber; 4) Dash Anchor fasteners of HILTI or equi. for fixing the frame at every 600 mm spacing. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting style and horizontal rails; 6) Providing and fixing packing (rough ground) in full periphery/ at every 600mm c/c with average 6 mm thick PVC spacer/ compact sheet of width ; 7) Filling the gap between wall and frame on both sides with polyethylene baker rod of avg. 10 mm thickness with silicon sealant . 8) Termite treated seasoned teak wood. 9)Zinc alloy powder coated touch lock with hook. 10) Zinc alloy body with single nylon roller (weight bearing capacity to be 40 Kg). Contractor shall prepare shop drawing based on concept drawing and get approved from the consultants before procurement of material including making of mock up for approval with all hardwares. Rate shall be inclusive of all material, labour, fixing, accessories.(make: HIFAB, DOMAL)

Providing and fixing fibreglass Mosquito nets fixed in window frames/shutters/ louvers with all required accesories of approved brand, powder coated and plastic components with weather stripping of polypropylene with track profiles for smooth operation in channel, colour as required and all complete as per direction of EIC. (excluding cost of aluminium frames and shutters)

Providing, hoisting and fixing adjustable Exterior Louver System made of aluminium profile 305mm x 40mm x 1.25mm, up and down side aluminium channel min. 30mm x 35mm, all mechanism and accessories manufactured by material ss 316, lock system at different angles, up and down side hdd plastic cover, above plinth level up to floor five level in vertical & horizontal fins, individually, including structural parts of anodized aluminium HE-30, including the cost of required scaffolding as per the direction of Engineer in charge all complete.(make : SLIM TECH INDIA or equivalent)

Providing material and labour for fixing 8mm thick Clear Toughen Glass as per approved sample of any size, any shape and specified thickness in frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.

Providing and fixing 5mm thk float glass panel frosted/plain glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage.

Providing and fixing 35 mm thick flush door filled with country wood, water proof flush door single shutters with 1 mm high end laminate sheet (Brand: Royale touche, Greenlam, Century ply) on both side of the door with lipping edging patti all around the door. The door would have vision glass panel with 5mm glass including cutting, fixing all where required. The door with also have accessory like 2 Nos pull SS handles in Brush finish of the size 25mm diameter, 30 cm long made from anticorrosive high grade AISI 316 stainless steel. Providing and fixing one number of 10 mm diameter 20 cm long anticorrosive high grade AISI 316 stainless steel tower bolt, with fixing SS heavy duty screws to the frame as approved by Engineer -in-charge etc. complete as per detailed drawing. ALL FLOORS. (All accessories brand: Ozone, Kich)

Providing and fixing 25 mm thick flush door filled with country wood, water proof flush door single shutters with 1 mm laminate sheet (Brand: Royale touche, Greenlam, Century ply) on external side and waterproof PVC laminated sheet (Brand: Royale touche, Skydecor) internal side of the door with lipping edging patti all around the door including using 2 Nos pull SS handles in brush finish of the size 25mm diameter, 15 cm long made from anticorrosive high grade AISI 316 stainless steel. Providing and fixing four numbers of anticorrosive high grade AISI 304 stainless steel hinges of size 102 mm x 76 mm x 3 mm & anticorrosive high grade AISI 316 stainless steel 2 no.s Latch in matt finish, with fixing SS heavy duty screws to the frame as approved by Engineer -in-charge etc. complete as per detailed drawing. ALL FLOORS. (All accessories brand: Ozone, Kich)

Providing and applying 1mm thick core laminate sheet on door/wooden members/facias etc including cleaning and rubbing existing surface and applying sheet without any air gap as approved by Engineer -in-charge etc. complete as per detailed drawing. ALL FLOORS (Make:Greenlam/Royale Touche/ Euro)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (Brand: Ozone, Kich)

Providing and fixing fire resistant door frame+shutters+panic handle with door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade. Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc. Including panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand for each door shutter and manufacture to be approved by the Engineer- in- charge, all complete.

Providing & fixing Locks Godrej Mortice lock cover (with 3 sets of key) with all required tools and tackles, gaskets, screws in line and level at the height mentioned in the drawing, cutting and core the doors in exact dimensions, without damaging the shutter or frames up to the satisfaction of engineer in charge with Standard warranty of 1 year

Providing & fixing S.S. Pipe Handle of 30 Cm size of ASIS 316 Grade with all required tools and tackles, gaskets, screws in line and level at the height mentioned in the drawing up to the satisfaction of engineer in charge. (Brands KICH, OZONE AND ENOX)

Providing & fixing S.S. Pipe Handle of 10 Cm size of SS 304 Grade with all required tools and tackles, gaskets, screws in line and level at the height mentioned in the drawing up to the satisfaction of engineer in charge. (Brands KICH, OZONE AND ENOX)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (Brand Ozone, Kich, Enox)

Providing and fixing IS:12817 marked stainless steel butt hinges of 4x1x1" inches with stainless steel screws etc. complete in doors, windows, louvers as per drawings.

Providing & fixing Louvers of Anodized aluminium sections as horizontal members at 75 mm c/c and 100 x 25 x 2 mm (Wt. 1.16 kg/m) aluminium vertical section 125x25X2 mm (Wt. 1.43 kg/m) with SS 304 Aldrop 20 cm long including fixing and erection on site and making surface good etc. complete as per design for doors/windows/ventilators.

Providing and fixing in position, interlocking rolling shutter of approved make, made of 18 gauge, 75mm wide cold rolled GI lath interlocked, including top cover (20 gauge), spring, axles (specially designed shaft), guide rails (10 gauge), tees, iron pulleys, ball bearings, handles, arrangement for inside and outside locking arrangement, with Mechanical Type (Gear Arrangement), holding down bolts embedded in CC 1:2:4 / anchor fastener of HILTI or equivalent including 1 coat of Rustocap and 2 coat of Hi-Gloss Metal PU Paint of approved make and shade over all the surfaces etc. as directed. (Measurements considered for payments shall be clear size of opening plus guide channels on both the sides for width and 450mm on top for drum height.)

Providing and fixing upto floor two level precast fair finish exposed cement concrete jali blocks with fair finish quality of M25 concrete, cleaning, fixing and finishing in cement mortar 1:3 and curing complete including G. I. reinforcement/mesh and pointing works at all heights with necessary scaffolding etc. Shape of hollow part shall be round, square or rectangle and in pattern, provision of groove as per drawing, curing at all heights etc complete as per the drawing and direction of Engineer in charge. Contractor shall prepare mock up for one panel with approved block and as per satisfactiobn of Architect. Note: Payment should as per actual area of jali made out of hollow block, no deduction of hollow gap of block should be considered for payment.

Providing, making and fixing backlight sign with SS 304 Grade Hairline finished Acrylic Letters with LED of 18 inches height, made of SS sheet of 1.0 thick and fixed with embose of 1.25 inches from the wall for signage and the font style as approved sample or as per design and drawings. It shall be made from ISI Brushed S.S. 304. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smoothened. Width of the letter shall as per the proportion of the word for depth. The rate shall be inclusive of scaffolding, drilling, adhesive material, screwing, stud fitting, buffing etc. complete for all heights.

Providing, making and fixing backlight sign with SS 304 Grade Hairline finished Acrylic Letters with LED of 48 inches height, minimum 25 letters, made of SS sheet of 1.0 thick duly painted with automotive paint as per approved colour and fixed with embose of 3 inches from the wall for signage and the font style as approved sample or as per design and drawings. Backside of SS letter will be of Acrylic Frosted Sheets with 3 mm & ACP Sheet with 3 mm thick, including LED & power supply warranty of 5 years. It shall be made from ISI Brushed S.S. 304. It shall be fixed on the wall with chemical anchor fastener at any level any height. All Edges and corners shall be smoothened. Width of the letter shall as per the proportion of the word for depth. The rate shall be inclusive of RCC works, MS works, chemical fastener, scaffolding, drilling, adhesive material, screwing, stud fitting, buffing etc. complete for all heights.

Providing Indian Teak wood work in Trusses, Purling, Rafter, Post, Plates and the like wrought framed, hoisted and fixed in position with all works including cutting, fixing and sanding complete.

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer in charge.

Providing and fixing stainless steel (Grade 316) Railing and baluster system of approved make stair railing, hand rail, bump rail, guard rail, with knock down system made of Hollow or solid secion i.e. tubes, square, flat, plates, bar etc with base plate Cover cap, finishing accessories, infilled holding brackets, fixing accessories etc. for any type of design, shape (plain/ curvature), size as per drawing. Railing shall be top mounted or side/ wall mounted. Railing shall be fixed with SS 316 grade anchor fastner of required size and as per fixing position of approved make. No Weilding OR Fabrication shall be allowed at site. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Sample shall be approved before execution. Contractor shall arrange mock up of railing system (2 or 3 no) in required length as directed by Architect. Contractor shall protect railing system uptill handling over the project.

Plaster, Paint and Ceiling works Providing throating or plaster drip groove 10 x 10 MM and moulding to RCC chajja and horizontal surfaces.

Providing material and labour for fixing G.I. hexagonal chickenmesh of size 16mm x 24mm of 22 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge.

Providing and applying 10mm thick cement plaster in single coat plastering on ceilings and sofits of stairs upto all levels/floors (i)Cement mortar 1:3 (1-cement:3-sand) including finishing with a floating coat of neat cement slurry, scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in-charge.

Providing and applying 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick/ AAC blocks walls for plastering upto all levels/floors and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand). Including scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in-charge.

Providing and appying 20mm thick sand faced cement plaster on walls upto all floors above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Including scaffolding, curing, finishing, making grooves, forming pattas etc. complete as directed by the Engineer-in-charge.

Providing 20 mm thick double coat mala cement plaster on exterior/ interior, brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete.

Providing and applying Wall painting (two coats) with plastic emulsion paint of approved brand having VOC (Volatile Organic Compound) content and manufacture on undecorated wall surface to give an even shade including required scaffolding, thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.( make Asian, Berger, Dulex, Nerolac)

Providing and applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including required scaffolding, thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete inluding required scaffolding. (make: Asian paint, Berger, Dulex, Nerolac)

Providing and fixing expose brick cladding work made from natural brick of 25-30 mm thickness having weight 0.8 kg per brick and water absorption less then 14%, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and cement slurry @3.3 kg/sqm including pointing work with matching shade of required pigmnet all complete as per direction by EIC, including brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete inluding required scaffolding. (make: jay jalaram brick works or equivalent)

Extra for rendering Smooth finishing of the all exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)., including cleaning,grinding, rubbing, scaffolding, leveling, subsequent removal and cleaning with wire brushespock marking with pointed tool, all complete as per EIC.

Metal Paint: Providing and applying two coats of abduct cured modified epoxy marine paint of 150 micron each and 50 micron top coat of acrylic pu finish. Including surface preparation by dry abrasive blasting of 45 to 60 microns with cleaning and removal of all dirt, grease, varnish, paint or any other foreign matter, including thinner and all accesories. Sample to be approved before starting of the work by Architect/ EIC. Rate shall be inclusive of the cost of scaffolding. (Brands: Jotun)

Providing and fixing single layer waterproof gypusm board 12.5 mm thick of the make Newgood Group Co. Ltd. or equivalent & Newgood Group Co. Ltd. company sections using waterproof board of size 1220 mm x 1830 mm x 8.0 mm suspended by G.I suapender of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm center to center and perimetre chanel A of size 20 mm x 27 mm x 30 mm x 0.50 mm at edges & drops including making trap/utility door, paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat joining compound top coat on ceiling including making necessary opening for light fitting, diffuser etc. complete as per detail drawing as directed.

Providing and applying Hot dip Galvanised coating confirming to Indian Standard 4579/2629/2633 with zinc coating thickness to be 86 micron and before application of GI coating the material should be free from all dirt, grease, varnish, paint or any other foreign matter. Including touching of local exposed areas with Zinc metal spray paint with 2 coats to make the structure corrosion free with cleaning thoroughly the applied surface making it free from grease, paint or any other foreign matter , sanding the surface before and after the paint to provide seamless aestheic look complete as per the instructions of the EIC including transport/loading/unloading the materials at plant for HDGC work

Waterproofing and Roof works- Providing and Laying broken China mosaic flooring for terrace using 12 to 20 mm broken pieces of only white glazed tiles (Bell/ Somany/ Johnson/ kajaria/ Cera/ Spartek/Orient / Nitco) to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar cream out up to surface using white cement including off junctions and extending them up to wall top, curing with water and cleaning with oxalic acid etc as directed.

Providing and laying integral cement based water proofing treatment conforming to IS: 2645 for treatment of roofs, balconies, terraces etc: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brickbats 25 mm to 115 mm size with 50% of cement mortar 1:5 admixed with water proofing compound over 20 mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound to required slope and treating similarly the adjoining walls upto 300 mm height rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 admixed with water proofing compound conforming to IS : 2645 and approved by EIC.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by EIC including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) Curing terrace with water flooded for min. 2 weeks. All above operations to be done in order and as directed and specified by the EIC with average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing cement vata (10 cm X 10 cm size) quarter round in Cement Mortar 1:1 including neat cement finishing, watering etc complete

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. (make: pidilite or equivalent)

Flooring works-Providing and laying 25 mm thick chisled/natural finish Kota stone machine cut flooring over 20mm thick base of cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M. 1:1.5 including pointing with cement mortar 1:2 (1-cement : 2-stone dust) etc. complete. (A) 25 mm thick

Providing and laying Machinecut Riverwashed finish Kota stone 25-30 mm thk. stone slab/ flooring/walls/steps/skirting/Dedo with edge cutting in required sizes upto 1200 x 600 mm, design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineering- Charge.

Providing and laying Machinecut Diamond/mirror finish polished Kota stone 25-30 mm thk flooring/wall in required design,patterns and size upto 600 x 600 mm , in linear as well as curvilinear portions all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-Charge.

Providing and laying Machinecut Kandla grey stone 18-22 mm thk stone slab/ flooring/wall mounted with edge cutting in required sizes, design and patterns, for wall cladding, plaforms, vanity counters, window sills, facades, in linear as well as curvilinear portions all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including fixing stone, over and above corresponding basic item, in facia, wall cladding and drops with chemical adhesive, including cleaning etc. complete.wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineering- Charge. (Brand for Adhesive:MYK Laticrete, Weber,Kerakoll)

Providing and laying Polished Kota stone slab 25-30 mm thick on edge, risers of steps,skirting Dedo and pillars laid on 20mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. including rubbing, curing, moulding and polishing to edges to give finish etc. complete at all levels. Including fixing stone, making grooves, over and above corresponding basic item, in facia, wall cladding and drops, including cleaning etc. complete.

Providing and fixing 20 mm thick Granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for wall cladding,plaforms, vanity counters, window sills, facades, in linear as well as curvilinear surfaces and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with epoxy matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Including fixing granite stone, over and above corresponding basic item, in facia, wall cladding and drops with chemical adhesive, including cleaning etc. complete. For all wall Caldding and Copping work also as per drawing including all colour and texture. (Brand for Adhesive:MYK Laticrete, Weber,Kerakoll)

Providing Edge moulding/buffing upto 25 mm thick Granite/Kota/ other stones, counters, Vanities, steps/ riser etc., including machine polishing to edge to give high gloss finish etc.including wastage,rubbing, cutting, providing grooves, curing and polishing etc complete as per design approved by Engineer-in-Charge.

Providing and laying fullbody Antiskid vitrified tiles of required size with matt finish in floors/walls/skirting (thickness to be specified by manufacturer) with residue of approved make and shade as per drawing with water absorption less than 0.08% and confirming to IS: 15622, laid over 20 mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand) bedding of approved make, in all colours and shades, including Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing, cleaning with mild oxalic acid, maintaining till handling over by covering with plastic sheet etc complete for all floor all height as directed by Engineer-in-charge. (Brands: Simpolo, Nexion)

Providing and laying fullbody Vitrified tiles ofrequired size with glossy/ivory finish in floor/walls/skirting (thickness to be specified by manufacturer) with residue of approved make and shade as per drawing with water absorption less than 0.08% and confirming to IS: 15622, laid over 20 mm thick cement mortar 1:6 ( 1 cement : 6 coarse sand) bedding of approved make, in all colours and shades including Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing, cleaning with mild oxalic acid, maintaining till handling over by covering with plastic sheet etc complete for all floor all height as directed by Engineer-in-charge. (Brands: Simpolo, Nexion)

Extra for providing material and labour for Grouting the joints of any type of flooring tiles upto 8mm widejoints and in full depth, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade and approved make (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge.

Road and Kerbing Works-Construction of Granular sub-base (GSB) by providing close graded Material conforming to specifications, mixing in place method with rotavator at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Rolling of earthwork in layers with power roller including filling in depressions which occur during the process including watering of earthworks.

Providing and laying Dense Graded Bituminous Macadam (DBM) using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. (50 to 100 mm average compacted thickness with bitumen of grade VG-40 @ 4.5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.)

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 30 mm compacted thickness with bitumen of grade VG-40 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.

Providing and applying Prime coat with bitumen emulsion (SS1) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.60 kg/sqm using emulsion pressure distributor for finished item of work etc.

Painting the BT surface with bitumen of grade VG-40 including cleaning the surface using wire brushes and air compressor and then applying the bitumen @7.00 kg/10 sqmt with mechanical sprayer and flushing fine clean sand @0.03 cum/10 sqmt over the asphalt painted surface including the cost of material, transportation, royalty chargers, heating of bitumen, hire charges of air compressor, sprayer and all type of labours & materials etc. complete as directed by Engineer in charges etc. complete

Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. (i) Over 10cm in width

Providing and fixing pre-cast fair finish concrete kerb stone with vacuum wet hydraulic pressing technology of M40 grade cement based concrete block 60x30cm LXH and 15 cm thick as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete including corner, quadrants, angles, radius, dropper kerbs in all shapes (Brands: Vyara, Alcock)

Providing and fixing pre-cast concrete Dished channel/saucer channel with and without hole with vaccum wet hyraulic pressing technology of M40 grade cement based concrete block of 60x30x12.5 cm thick as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete including transportation and fixing without and edge or corner damage. Brands: Vyara, Alcock, basant

Providing and laying decastone GREY/ JETBLACK / RED DL R 80MM with minimum average 400 Kg/cm2 compressive strength at28 days with premier shield protection (modular paving stone) with 10 different sizes of cobbles for road, footpath, parking areas, service lanes and other areas having undulated surfaces, colured as specified by EIC/ architect, using UV resistant colour pigment of lanxess, premier shield integral and topcoat treatment for satin finish, water and oil repellance, reduction of algae, moss and efflorescence formation.Including providing and laying average 50 mm thick average bedding layer of coarse sand and fine sand below the block as per required grading and specification. Laid blocks shall be mechanically compacted. The Finished surface of the block shall have textured finish.It should be laid in such a way that the no cutting of the paver block to be necessary and if required, cutting of paver block by machine cut only. The Finished surface of the paver block shall have coarse sand texture finish. Sample to be approved before starting of the work by Architect/ EIC. The blocks shall be compacted and shall be re-laid if necessary. As per size and material specification, Brands: VYARA

Providing, Laying and fixing Cement concrete paver block of M 30 grade of approved make and shape 60 mm thick to be fixed on 75mm sand layer, laying the paver blocks in pattern as directed by the EIC including joint filled up with coloured cement to match the shade of tiles and colour (in different colour combination), rolling and mechanically compacting with appropriate tools and plants, all conveyance including loading, unloading of blocks etc. complete as directed by architect. It should be laid in such a way that the no cutting of the paver block to be necessary and if required, cutting of paver block by machine cut only. The Finished surface of the paver block shall have coarse sand texture finish. Sample to be approved before starting of the work by Architect/ EIC. Make: Vyara, Super

Construction of Dry Lean Cement Concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blend.With minimum cement Consumption 150kg/Cum.

Construction of un-reinforced, dowel jointed, plain cement concrete pavement of M40 Broom Finish / polished finish over a prepared sub-base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of contraction, vaccum de-watering, shuttering expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, deboning strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawings. To be laid in alternate panels size apprx 4.5mt X 4.5 mt with fair finished steel channel formwork.

Regulatory/Mandatory signs: Providing and fixing sign boards made out of 2mm aluminium sheet; size 60cms. diameter circle, as per the design of IRC-67-1977 pre treated with phospheting process & acid eteching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size galvanised iron angle of 35 x 35 x 3mm, post 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. the details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade

Parking Signs: Providing and fixing sign boards made out of 2mm aluminium sheet; size 60 x 60cms. square plus 60 x 20cms rectangular additional plate as as per the design of IRC-67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size galvanised iron angle of 35 x 35 x 3mm and 75x75x6mm post as required; painted with best quality epoxy coatings in black and white bends. the details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade

Sign Board per square Meter :-Providing and fixing sign boards made out of 2mm aluminium sheet; maxiumum size 1 Meter x 1 Meter as per the design given by engineer in charge pretreated with phosphating process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorized with retro reflective sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame may be fabricated either from suitable size iron angle of 35 x 35x 3mm & 50 x 50 x 5mm & 75 x 75 x 6mm as required painted with best quality epoxy coatings in black and white bends. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(B)High Intensity Grade

Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, uniform and free from streaks and holes.

Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed molding with reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (High Intensity grade)

Outdoor Flooring works-Providing and laying Riverwash kota stone 25 mm thk stone slab/ flooring/ steps/ risers /wall mounted with edge cutting in required sizes, design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineering- Charge.

Providing and laying Riverwashed Granite stone 25mm thk flooring/wall in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-Charge : Colour Jet Black, Cherry Red, Steel grey, Elite Brown, Cat Eye or equivalent.

Providing and laying POLISHED Granite stone 25mm thk flooring/wall/edging in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-Charge : Colour Jet Black, Cherry Red, Steel grey, Elite Brown, Cat Eye or equivalent.

Providing and laying Mandana stone flooring in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-Charge

Providing and laying permeable/ turf cement paver block with high density average 60 mm thick having M30 grade concrete for footpath, parking areas, service lanes and other areas, on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick and 150 mm thick subgrade of compacted bed and filling with sand below the block as per required grading and specification. Laid blocks shall be mechanically compacted. The Finished surface of the block shall have textured finish. The blocks shall be compacted and shall be re-laid if necessary sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per size and material specification,direction of Engineer-in-charge. Brands: VYARA, Alcock, “basant betton”

Providing and laying Tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and laying matt finished full body vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. (Brands: Pavit, Somany, Equivalent)

Providing and fixing of 15 mm thick EPDM flooring for Proffessional Athletic Running track area in multi colour including all the paint work of lines, numbers, alphabets with 9 mm thick SBR rubber layer and 6 mm EPDM made with tyre recycled crumb which mixed with polyurethane binder 15% in base base layer id for cushion and Top layer EPDM granules which is made with “Ethylene propylene diene monomer “ with color pigment granule 1-4mm with non toxic property which is mixed with polyurethane binder used 20%, applied with fast curing polyurathine binder including wastage and complete as per EIC (Brands Ecoflex, Koochieplay, Ebaco)

Pebble dash plaster upto 10 m height above ground level in flooring as well as on vertical surface all complete, with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. including making necessary horizontal and vertical 10 mm grooves as required and providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing & fixing of White River (Stone) Pebbles size upto 2" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

Supplying and stacking at site dump manure from approved source, including carriage with all lead and lift complete. Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge.

Providing and mixing iron shravings in the cement concrete mixture with all lead and lift complete, as per direction of officer in charge.

Street furniture works-Providing and fixing Precast Composite Concrete Litter Bin of 600x600x1000 (LxBxH) each unit weight 75 kg as single cast mono element full body composite concrete with expose smooth finish, engrave lettering and with metal top cover with draining facility and varnish weatherproof coating with 12 MPa flexural strength and Compressive strengh of 40 MPa, UV resistant stabilise colour as per Architects choice including fixing, cleaning surfaces and including cost of loading -unloading and placing with crane.

Providing Precast Concrete Modular backless bench of 1800x450x450 LBH & 100 mm thickness single cast mono element with terrazzo smooth finish made of Full Depth Terrazzo mix High Performance GlassFiber Reinforced Concrete 12 MPa flexural strength and 40MPa Compressive Strength, UV resistant stabilise colour pigment, colour as per Architects choice including fixing, cleaning surfaces and cost of loading -unloading and placing with crane.

Providing and fixing Precast Glass Fibre Reinforce Concrete bench of 0.45x0.45x 1.5 m length of minimum 75 mm thickness, weight 95kg with wooden top with antitermite treatment and varnish with expose smooth concrete finish and weatherproof coating with 8 MPa flexural strength and compressive strengh of 25 MPa, UV resistant stabilise colour as per Architects choice including fixing, cleaning surfaces and including cost of loading -unloading and placing with crane.

Providing and fixing Precast Composite Concrete circular seating bench of 3 separate unit circular seating of 7 feet diameter, each unit weight 100 kg as single cast mono element full body composite concrete with expose smooth finish and with wooden top with anti termite treatment and varnish weatherproof coating with 8 MPa flexural strength and Compressive strengh of 25 MPa, UV resistant stabilise colour as per Architects choice including fixing, cleaning surfaces and including cost of loading -unloading and placing with crane.

Providing and fixing Precast Glass Fibre Reinforce Concrete cube seating bench of 600mm dia x 400mm H., each unit weight 55 kg/sqft as single cast mono element full body composite concrete with expose smooth finish and weatherproof coating with 8 MPa flexural strength and compressive strengh of 25 MPa, UV resistant stabilise colour as per Architects choice including fixing, cleaning surfaces and complete and including cost of loading -unloading and placing with crane.

Providing and fixing Precast Concrete bollard of 50x150x450 mm clear height from finished level as single cast mono element with expose smooth finish and weatherproof coating of 8 MPA flexural strength and compressive strength of 25 MPA weighing around 25 kg/sqft, UV resistant stabilise colour pigment, colour as per Architects choice including fixing, cleaning surfaces and complete.

Providing and fixing Galvanised chain link 2 10x10 guauge including cutting, hoisting, fixing in position at all heights as per EIC

Tree pit cover - Providing and fixing precast tree pit cover around the tree pit, factory made exposed /fare finish precast Tree pit cover block of two-four halve in FRC concrete of size upto - 1.20 Mt x 1.20 Mt x 0.075mt thick including transporting, loading, unloading fixing etc. complete. The rate shall also include for erecting and fixing the pieces in position with necessary equipment without any damage. (Sample to be approved) (Brands: Vyara, Arya Precaset, Alcock)

Supplying and fixing reinforced concrete heavy duty non-pressure NP3 pipes with collars/without collars as per IS 458-1991 specifications including setting the pipes in ground for tree protection. 600 mm dia. As directed by EIC.

Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account. (a) Girth of tree shall be measured at a height of 1m above ground level. for Girth of trees beyond 50 cm and upto 90cm.

Providing and laying Large Stone Boulders used in Landscape gardens of minimum size of 1.5 x1.5x 1 m. including carving for sculpture works, loading-unloading with crane, labour, dressing, rubbing, curing, cleaning etc. complete at all levels and heights as per the design, shapes and sizes provided by the Architect.

Flag mast : Providing and fixing flag mast of required size upto 60 mtrs. having 3" dia. Dome on top, single flag rotating truck, 2 swivel snaps to attach the flags to the rope, rope to raise and lower flag, anchor cleat for wrapping rope and embedment sleeve for the mast with required base and suitable structure for the pole. The mast to be fabricated from special steel plates, confirming to ASTM A 572/BS EN 10025., Mast to be single hot-dip galvanised,internallly and externally as per ASTM A 123 and A153. The top and bottom dia. and plate thk. of mast are to be designed as per EN40.

Providing, Supply and Fixing of Mini Ski outdoor gym equipment 1.07 m x 0.78 m x 1.40 m, Upright structural posts of height 1.40 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. The Standing Bars 991 mm and Dia 60 mm fabricated from 40 O.D. galvanized steel pipes Upper part of Support Handrails of size 1.04 m high and Dia 38 mm fabricated from 40mm O.D. and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms.Maintenance : Maintain according to EN16630 and the maintenance guide. all as per detail and direction of EIC. (Brands- Ok Play, Koochie, Arihant)

Providing, Supply and Fixing of Bicycle outdoor gym equipment 1.11m x 0.51 m x 1.31 m, Upright structural posts of height 1.31 m is to be schedule HOT DIP Galvanized steel with a 60 mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Pedal of size 113mm x 40mm & Rotating Disc of Dia 380 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Welded. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide, all as per detail and direction of EIC. (Brands- Ok Play, Koochie, Arihant)

Providing, Supply and Fixing of Elliptical Cross Trainer outdoor gym equipment 1.02 m x 0.53 m x 1.52 m, Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot rest of size 320 mm x 132 mm are attached to the Standing Bars 998 mm x 40 mm fabricated from 40 O.D. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 47 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm O.D. and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide, all as per detail and direction of EIC. (Brands- Ok Play, Koochie, Arihant)

Providing, Supply and Fixing of Push and Dip Station outdoor gym equipment 1.95m x 0.55 m x 1.56 m, Upright structural posts of height 1.60 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two sets of parallel bars of size 0.97 m x 0.55 m shall be an all-robotic welded unit, fabricated from 38 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Welded. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide, all as per detail and direction of EIC. (Brands- Ok Play, Koochie, Arihant)

Providing, Supply and Fixing of Squat Pushing outdoor gym equipment 1.93 m x 0.56 m x 1.70 m, Vertical bars height of 1.70 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. L shaped bars of 960 mm x 600 mm carrying two seats of 0.34 m x 0.34 m fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide,all as per detail and direction of EIC. (Brands- Ok Play, Koochie, Arihant)

Providing and fixing Volleyball sports nylon net of 100 mm grid with minimum 9.5x1m height including fixing with post in line and level, complete. (Brand: Cosco, Nivia)

Providing and fixing set of Basket Ball Post of 8" G.I. round pipe, in 3.25 mt extension, fixed in ground & with reinforced fibre laminated and non- transparent, white colour 25 mm thk. Acrylic Board, with basket ball fixed ring made of 20 mm rod and extra heavy plate, with basket ball met made of extra heavy duty 10 mm card p.pair, all complete as per direction of EIC. (make:Khalsa, fibrecrafts, aecricket)

Providing, Supply and Installation of Ae Special Fixed Net Cage of Size ( 24' X 120' X 13') -- with 2 pcs of size (12'x 120' x 13') Ae Special Cricket Practice MS GI Net Cage Fixed with 1.5” MS pipe cage with Garware Net Joints with special MS brackets.The structure would be finished with green colour spray paint. The whole structure would be with nut-bolt system and can be removed/detached when required including Installation, all complete as per direction of EIC.

Providing, Supply and Installation of Ae Special Fixed Net Cage of Size ( 12' X 120' X 13') -- Ae Special Cricket Practice MS GI Net Cage Fixed with 1.5” MS pipe cage with Garware Net Joints with special MS brackets.The structure would be finished with green colour spray paint. The whole structure would be with nut-bolt system and can be removed/detached when required including Installation, all complete as per direction of EIC.

Horticulture Works Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying, stacking and spreading of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment).

Carting of soil from inside plant area, including to loading , unloading and transport

Supplying , stacking and spreading of river sand at site including transportation to site . A source sample of sand, prior to stacking at site shall be got approved, the quantity of the same can be verified by volume as well as weight or density etc. soil filling up to as required.

Supplying , stacking and spreading sludge / well decayed farm yard manure from thesource approved by the engineer in charge incl. screening, loading, unloading, conveyance and stacking at site.

Mixing earth and manure or in proportion specified or directed, Spreading of dung manure or / and good earth in required thickness. and fine dressing the ground as per natural gradiant

Providing including loading, unloading and Planting saplings of plants/ trees (Planting of 2m height and min.20 cm girth healthy saplings) excavation of required size pit, in the proper beds as prepared and maintaining the same by involving all the operations like multing,de-weeding, hoeing, forking, watering and application of chemical fertilizer, insecticides/ pesticides etc. for the following trees/ plants (the pit shall be filled with fresh soil and manure, i.e as stacked at site, Digging holes in ordinary soil and carting away the excavated earth and fine dressing and refilling with garden soil and farmyard manure (3:1ratio) including supplying, stacking, mixing and spreading sludge/ welldecayed farmyard manure, application of required pesticides for antitermite treatment, by volume the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed. Holes min.0.9 x 0.9m and 0.9 m deep with required stacking and maintaining it for 5 year.-Pongamia pinnata

Millettia peguensis

Terminalia catappa

Samanea saman

Delonix regia

Syzygium jambolana

Tectona grandis

Acacia auriculiformis

Artocarpus heterophyllus

Ficus virens

Mangifera indica

Azadirachta indica

Casuarina equisetifolia

Terminalia mantaly

Cocos nucifera

Phoenix sylvestris

Plumeria Rubra

Providing including loading, unloading and Planting hedges/shrubs (min. 2'-3' height and girth size 8mm-12mm) approx 10-14 plants per sq mtrs, border plant, excavation of required size pit, in the proper beds as prepared and maintaining the same by involving all the operations like multing, de-weeding, hoeing, forking, watering and application of chemical fertilizer, insecticides/pesticides etc. for the following plants (the pit shall be filled with fresh soil and manure, i.e as stacked at site,Digging holes in ordinary soil and carting away the excavated earth and fine dressing and refilling with garden soil and farmyard manure (3:1 ratio) including supplying, stacking, mixing and spreading sludge / well decayed farm yard manure, application of required pesticides for anti termite treatment, by volume the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed. Holes min. 0.30 x 0.30 m and 0.30 m deep with required stacking and maintaining it for 5 year. Pandamus Baptisti "variegated"

Cymbopogon Cytratus

Ficus Nitida

Hamelia Patens

Ixora Singaporensis

Pennisetum Setaceum

Pennisetum Setaceum "cuprus"

Hibiscus variegated

Cocoloba Unifera

Adhotoda Vasica

Jatropha Integrina

Heliconia metallica

Tecoma × smithii

Stachyterpheta Jamaicensis

Bauhinia Tomentosa

Ruellia tuberosa

Acalypha hispida

Cestrun Dinernum

Duranta Variegated

Ficus Panda

Murraya Paniculata (Madhukamini)

Providing including loading, unloading and Planting ground covers (min. 6" height and girth size 5mm-8mm) approx 10-14 plants per sq mtrs, border plant, excavation of required size pit, in the proper beds as prepared and maintaining the same by involving all the operations like multing, de-weeding, hoeing, forking, watering and application of chemical fertilizer, insecticides/pesticides etc. for the following plants the pit shall be filled with fresh soil and manure, i.e as stacked at site,Digging holes in ordinary soil and carting away the excavated earth and fine dressing and refilling with garden soil and farmyard manure (3:1 ratio) including supplying, stacking, mixing and spreading sludge / well decayed farm yard manure, application of required pesticides for anti termite treatment, by volume the excavated earth shall be placed within premises at required place, rolling, levelling, watering and compaction etc. in required gradient complete as directed. Holes min. 0.20 x 0.20 m and 0.30 m deep with required stacking and maintaining it for 5 year.Wadelia Trilobata

Senecio Confusus

Portulaca Grandiflora

Tradescantia spathacea

Staking of trees done by tying of 2" dia. bamboo stakes with canvas webbing or rubber tubes. Minimum 3 stakes per tree.

Demolition and Dismantling works-Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle

Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff. For removing bitumenous surface layers from bitumen road

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars, serviceable materials and disposal or unserviceable materials at non objectionable place with all leads and lifts including cutting the reinforcement, and finishing the broken surfaces to match with the surroundings etc. complete : RCC Works

Demolishing cement concrete manually/ by mechanical means including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) P.C.C. work/ Road Works

Demolition of Brick Work/AAC block work/ Stone wall with plastered surface/ wall dedo including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Dismantling stone slab flooring laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. Also for stone floor, chinamosaic floor, tile dedo, etc.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing.

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth.

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth.

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Dismentling/ removal Charges of existing LED Street Light/ telephone Fixtures/ Traffic Signals of various wattages with Bracket & Street Light Pole including excavation and dismantling of foundation concrete and lines,carring & handling charge for shifting under the supervision of concerned department, to proper place as specified and directed by the dept. disposal with all lifts and up to all lead and lift, stacking the serviceable and unserviceable material separately.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material with all lead and lift, as per direction of Engineer-in-Charge.

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials with all lead and lift as per direction of Engineer-in-charge. Max. size 120x120x150 cm deep.

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift ( for any dia, of pipe)

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

ELECTRICAL--Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories. Cat. III

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire - As per description 1.2.3. (a) with medium class Rigid PVC pipe and accessories. Cat. III

[III] For 20A Plug with 2-4 sq.mm Cu. Wire - As per description 1.2.3. (a) with medium class Rigid PVC pipe and accessories. CAT-III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories. Cat-III

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge. (4) TV Co-axial Socket outlet - As per description 1.2.6. Cat-III

(5) Electronic hum Free four or more steps EME Fan regulator. Cat-III

(7) Blank Plate Single - As per description 1.2.6. cat-III

(9) 16 Amp. SP one way switch. Cat-III

(10) 6/16Amp. Universal socket - As per description 1.2.6. Cat-III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (a) 20 mm

(b) 25 mm - As per description 1.3.2

(c) 32 mm - As per description 1.3.2

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (1) 20 mm

(2) 25 mm - As per description 1.3.4

(3) 32 mm - As per description 1.3.4

(A) Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free & flame proof confirming BS .All necessary accessories and measuring of following sizes. (2) 100 mm x 50 mm trunking

(4) 100mm x 50mm trunking with twin compartment with clip in divider.

[C] G.I. Junction cross over box for metal / Al. trunking with duct entry 25mm x 38mm size having epoxy powder coated trap lead with corrosion & rust free having load bearing capacity of 3.6 TONS with adjustable levelling screw of following size. [1] 150mm x 150mm x 60/75 mm depth

[2] 250mm x 250mm x 60/75 mm depth - As per description 1.3.10

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. (b) 2 wire 1.5 sq. mm

(b) 2 wire 2.5 sq. mm - As per description 1.4.1

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (a) with medium class Rigid PVC pipe and accessories. a. 2 wire 4 sq. mm

(e) 3 wire 6 sq. mm

(b) 2 wire 6 sq. mm

(h) 4 wire 6 sq. mm

(i) 4 wire 10 sq. mm

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. b).RG-6

CABLES AND ACCESSORIES-Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (E) 3 core 2.5 Sq. mm

(F) 3 core 4 Sq. mm -As per description 4.2.1

(L) 4 core 6 Sq. mm-As per description 4.2.1

(M) 4 core 10 Sq. mm-As per description 4.2.1

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (A) 3 core 2.5 Sq. mm

(B) 3 core 4 Sq. mm - As per description 4.3.2

(C) 3 core 6 Sq. mm - As per description 4.3.2

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

((B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) - As per description 4.3.3

(C) 3 1/2 core 70 Sq.mm (35 Sq.mm 1/2 core) - As per description 4.3.3

(D) 3 1/2 core 95 Sqmm (50 Sq.mm 1/2 core) - As per description 4.3.3

(E) 3 1/2 core 120 Sq. mm (70Sq. mm 1/2 core) -As per description 4.3.3

(F) 3 1/2 core 150 Sq.mm (70 Sq.mm 1/2 core) - As per description 4.3.3

(G) 3 1/2 core 185 Sqmm (95 Sq. mm 1/2 core) - As per description 4.3.3

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (b) 4 core 6 Sq. Mm

(c) 4 core 10 Sq. mm

(d) 4 core 16 Sq. mm - As per description 4.3.4

(e) 4 core 25 Sq. mm - As per description 4.3.4

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A) 4 core 2.5 Sq. mm

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge. (A) 25 mm dia

(B) 50 mm dia - As per description 4.5.6

(C) 80 mm dia. - As per description 4.5.6

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (c) 2 to 4 core 4 Sq. Mm

(c) 2 to 4 core 6 Sq. Mm

(d) 2 to 4 core 10 Sq. mm - As per description 4.6.1

(e) 2 to 4 core 16 Sq. mm - As per description 4.6.1

(f) 2 to 4 core 25 Sq. mm - As per description 4.6.1

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm - As per description 4.6.3

(C) 3 & 1/2 core 70 Sq. mm - As per description 4.6.3

(D) 3 & 1/2 core 95 Sq. mm - As per description 4.6.3

(E) 3 & 1/2 core 120 Sq. mm - As per description 4.6.3

(F) 3 & 1/2 core 150 Sq. mm - As per description 4.6.3

(G) 3 & 1/2 core 185 Sq. mm - As per description 4.6.3

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

(B) 10 Sq.mm- as per description 4.7.1

(C) 16 Sq.mm. - as per description 4.7.1

(D) 25 Sq.mm. - as per description 4.7.1

(E) 35/50 Sq.mm. - as per description 4.7.1

(F) 70 Sq.mm. - as per description 4.7.1

(G) 95 Sq.mm. - as per description 4.7.1

(H) 120 Sq.mm.- as per description 4.7.1

(I) 150 Sq.mm. - as per description 4.7.1

(J) 185 Sq.mm. - as per description 4.7.1

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized CR sheet steel. The cable tray should be bended as per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. (3) 150 X 50 X 1.5 mm Thick

(2) 100 X 50 X 1.5 mm Thick- as per description 4.11.5

(4) 200 X 50 X 1.5 mm Thick- as per description 4.11.5

(5) 300 X 50 X 1.5 mm Thick- as per description 4.11.5

Providing and fixing approved make 'T' Junction for Perforated C type cable tray. Made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge..(3a)150 X 50 X 1.5 mm Thick ' T' Junction

(4)200 X 50 X 1.5 mm Thick '

(5)300 X 50 X 1.5 mm Thick '

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from pre galvanized CR sheet steel. The Junction should be bended as per IS 2062/1079. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (3) 150 X 50 X 1.5 mm Thick 90° Elbow

(4)200 X 50 X 1.5 mm Thick 90° Elbow

(5) 300 X 50 X 1.5 mm Thick 90° Elbow

Lowering, laying and jointing HDPE pipes and specials (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material. (1) 50mm dia

(3) 75mm dia

Lowering, laying and jointing HDPE pipes and specials (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material. (1) 110mm dia

(4) 160mm dia

(7) 225mm dia

Providing and supplying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes of size HDPE PE100 PN10 as per IS-4984/2016. 6kg/cm2. Suitable for underground cable duct ,including of Couplers and endcaps. (1) 50mm dia

Providing and supplying in standard length ISI mark high density Polyethylene H.D.P.E. Pipes of size HDPE PE100 PN10 as per IS-4984/2016. 6kg/cm2. Suitable for underground cable duct ,including of Couplers and endcaps. (2) 75mm dia

(4) 110mm dia

(7) 160mm dia

(11) 225mm dia

Excavation for pipe line trenches for electrical line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. (a) in all sorts of soil and soft murrum. upto 1.5m depth

Construction of Manhole chambers 600mm X 600 mm and depth 1.0 m in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6. With precast slab in two parts 15mm.

Providing and fixing of 600mmx600mm recessed FRP manhole covers for 25tonnage capacity including frame with key hole and all required fittings and accessorries.

SWITCHGEAR, PANEL & ACCESSORIES-Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating up to 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S.housing. ICS=100% of ICU only. Cat III

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat-III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity -(A) 6 to 32 Amp. Cat-III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (b)40 Amp. Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (c)63 Amp. Cat-III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used). (A)(b-ii) Single phase 6way SS Double door

(A)(b-iii) Single phase 8 way SS Double door- as per description 3.11.5

(A)(b-iv) Single phase 12 way SS Double door- as per description 3.11.5

(B)(b-ii) Three phase 6 way SS Double door for single phase outgoing horizontal box - as per description 3.11.5

(B)(b-iii) Three phase 8 way SS Double door for horizontal single phase outgoing - As per description 3.11.5

Providing & erecting approved make thermo plastic MCB/ELCB distribution board having modular Double door with DIN rails, epoxy powder coated finish metal frame & door assembly with Acrylic/ Plastic door, spring & hinged pins complete with required PVC sleeved 32 / 63A copper Bus strips without MCB / ELCBs. (d) Two Row 20 Mod

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. (I) 25 Amps. DP-CAT-III

(ii) 40Amps. DP Cat-III

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (ii) 40 Amps.FP. Cat-III

(iii) 63 Amps. FP Cat-III

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 6 KA short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. completed. [e] 32A to 40 A, 4 Pole Three Phase. Cat-III

[f] 63A, 4 pole Three Phase. Cat-III

Providing and erecting metallic vetrified danger notice board for MEDIUM VOLTAGE installation to be erected as per I.S

Providing and erecting required size HOT deep Galvanised strip for earthing of H.T. OCB/ ACB/ Transformer LT pannel board, Motors etc. using copper clamp.

Providing and erecting HOT deep Galvanised strip iron wire 8 to 16 S.W.G.

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [B] For Electrical installation up to 11 KV. located in other than normal soil i.e. Soft Rock, Marshy Soil etc. Length of Pipe : 2 mtr. -Back filling Compound :1 no. Bag of 25 Kg.

[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc. - As per description 3.14.10. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg. -as per description 3.14.10

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board having IP-54 protection made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size. (A) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use.(i) with 350mm depth

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also comporised permanent ON/OFF switching. Programming switches & housed in fire proof thermoplastic enclosure & transperent cover erected as required with necessary connection.

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO & 2 NC aux contacts complete with 415V/220V operating coil suitable for - 40 amp. ( Dinrail mounted & DB mounted only of Legrand make.)

SITC of 4-Way VTPN DB, IP43 metal door. Double door with arrangement for FPMCCB, TPMCBs. Make: Havell's, Legrand, Schneider

SITC of 8-Way VTPN DB, IP43 metal door. Double door with arrangement for FPMCCB, TPMCBs. Make: Havell's, Legrand, Schneider

SITC of 32A TP MCB, 10kA Short Circuit Breaking Capacity, ‘C’ curve. Make: Havell's, Legrand, Schneider

SITC of 40A TP MCB, 10kA Short Circuit Breaking Capacity, ‘C’ curve. Make: Havell's, Legrand, Schneider

SITC of 63A TP MCB, 10kA Short Circuit Breaking Capacity, ‘C’ curve. Make: Havell's, Legrand, Schneider

SITC of Panels of below ratings as per IS Specifications and respective drawings. The unit rate for each item shall include : Call for final inspection prior to dispatch. Delivery of the panels to site. Shifting of the panels from site store to the suitable location. Fixing of Shipping Section. Assembly and wiring of component supplied separately. Installation of panel to Electric Room including removing packing. Earthing all components, frame etc. to a common internal earth bar. M.S. parts should be painted with powder coating. Supply & Fixing all accessories and supporting structure. Supply & Fixing of M.100 mm. channels for fixing the panels. Connection, Testing & Commissioning. Checking of Internal connection and wiring, operation of switches, starter, TPN MCCB, relays, contractors etc. Supply of necessary tools, hardware, mounting with necessary civil masonary works etc. Electrical Contractor shall carry out the insulation test at site and all the observations shall be recoreded and submitted in duplicate to the consultant or engineer - in - charge. The rate shall include the civil foundation as approved by site enginner. Make: Schnieder, ABB, Siemense, L&T. SITC of Indoor type Main LT Panel-1 (Electrical Room) as per above specifications. Incomer : 630A, FP MCCB. Busbar: 630A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 630/5A 3 NOS (for Measuring Current) with ASS & Ammeter. CT 630/5A 3 NOS (for APFC Relay). Buscoupler : 630A, TPN Microprocessor Based 36KA, MCCB. 1 no. 200A FP MCCB. Outgoings : 1no. 400A FP MCCB, 1no. 250A FP MCCB, 2nos. 200A FP MCCB, 4nos. 100A FP MCCB, 2nos. 63A FP MCB, 3nos. 40A FP MCB, 2nos. 25A TP MCB. Contractor must consider 150KVAR APFCR panel including the main panel. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Outdoor type Feeder Section Panel-1 (Near Life Science Block) as per above specifications. Incomer : 200A, FP MCCB. Busbar: 200A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 200/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 1no. 160A FP MCCB, 2nos. 100A FP MCCB, 1nos. 63A FP MCB, 1nos. 40A FP MCB, 2nos. 25A TP MCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Outdoor type Feeder Section Panel-2 (Near Main Entrance) as per above specifications. Incomer : 100A, FP MCCB. Busbar: 100A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 100/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 1no. 40A FP MCB, 1no. 40A DP MCB, 6nos. 25A FPMCB, 2nos. 25A DPMCB, 1no. 32A TPMCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Outdoor type Feeder Section Panel-3 (Near Hostel Block) as per above specifications. Incomer : 250A, FP MCCB. Busbar: 250A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 250/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 1no. 160A FP MCCB, 1nos. 100A FP MCCB, 1nos. 63A FP MCB, 1nos. 40A FP MCB, 2nos. 25A TP MCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Outdoor type Feeder Section Panel-4 (Near Admin Bock) as per above specifications. Incomer : 200A, FP MCCB. Busbar: 200A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 200/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 1no. 160A FP MCCB, 1nos. 100A FP MCCB, 1nos. 63A FP MCB, 1nos. 40A FP MCB, 2nos. 25A TP MCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Outdoor type Feeder Section Panel-5 (Near Hostel Side Entrance) as per above specifications. Incomer : 100A, FP MCCB. Busbar: 100A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 100/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 1no. 63A FPMCB, 1no. 40A FP MCB, 1no. 25A FPMCB, 2nos. 25A DP MCB, 2nos. 25A TPMCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Outdoor type Feeder Section Panel-6 (Near Canteen & PCM Block) as per above specifications. Incomer : 400A, FP MCCB. Busbar: 400A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 400/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 1no. 300A FPMCCB, 1nos. 100A FP MCCB, 1nos. 63A FP MCB, 1nos. 40A FP MCB, 2nos. 25A TP MCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Indoor type Floor Panel-1 & 2 (Admin & Life Science Block) as per above specifications. Incomer : 160A, FP MCCB. Busbar: 160A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 160/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 21nos. 40A FPMCB, 1no. 63A FP MCB, 3nos. 25A FPMCB, 2nos. 25A TPMCB, 2nos. 20A DPMCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Indoor type Floor Panel-3 (PCM Block) as per above specifications. Incomer : 300A, FP MCCB. Busbar: 300A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 300/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 35nos. 40A FPMCB, 1no. 63A FP MCB, 5nos. 25A DPMCB, 2nos. 25A TPMCB, 2nos. 20A DPMCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

SITC of Outdoor type Feeder Section Panel-8 (Near Pavilion) as per above specifications. Incomer : 160A, FP MCCB. Busbar: 160A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 160/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 1no. 125A FP MCCB, 1no. 100A FPMCCB, 3nos. 40A FP MCB, 1nos. 63A FP MCB, 1nos. 40A FP MCB, 5nos. 25A FP MCB, 3no. 25A DPMCB, 3nos. 25A TPMCB. 3nos. of digital timer switch. Space for 160A FPMCCB coupler and other required switchgear and accessories for DG changeover purpose. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution.

ILLUMINATION & ACCESSPRIESV-Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be approved by Engineer in charge]

Providing 2.5mm.thick laminated sheet to cover the fan hook or Fan box.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. [A] 305 mm dia 900 RPM. Cat-II

Supplying & erecting electro galvanised G.I. wire micro mesh jali cover of grade 304 required size with suitable wooden frame duly fitted in wall outside of exhaust fan for insect protection.

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed. Cat-II

Providing and fixing approved make Octagonal poles. Made from CR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/4759. with required base plate suitable suspend local wind speed to be erected on existing foundation. (B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

Pole base suitable for following size of pole fabricated from 4 mm. Thick M.S. sheet with M.S.door having two hinges welded on M.S. flat 25 x 3 mm which is fitted on M.S..base by bolts welded inside the pole base erected with one coat of Red oxide and two coats of Aluminium paint. Outside dimension as per SOR. drawing. (a) Suitable for 90 mm. dia.base of pole

Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x 100 cms. Deep in below ground level with plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. ( for 4 & 6 mtr pole)

Providing & erecting approved make street light / wall mounting junction box compression moulded from DMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in / loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following size. [B] 250mm x 194mm x 99 mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name. 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). (A) Tube Light with integral/ non-integral driver. (d) 20-22 Watts, Surge - 4KV,IP-20, 4 feet. Cat-III

(C) Square/ Circular, Surface/Recessed Mounted Downlight with provision for spring loaded mounting clips complete. (b) 10-15 watts, Surge-4 KV. Cat-III - as per description 14.01

(c) 20-24 watts, Surge-4 KV- as per description 14.01©

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt . LED driver efficiency > 85 %. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates). (B) Flood Light (IP-65), Surge -4KV. (d) above 100 to 120 watts. Cat-III

SITC of IP66, IK07, 60W LED (4000K) modern single arm type decorative light fixture with 6 Mtr. die cast aluminium pole of 100mm (round/square shape) including following specifications: Die cast EN-AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws. Clear toughned glass 6mm thick. Luminaire with single cable entry and gormmet. Silicon gasket. Double powder paint. 150mm dia base plate with necessary bolts and fittings. Buried in ground upto 600mm depth. Powder coated as per approved colour with weather proof coat. All required cable connection with suitable MCB mounting inside the pole. 4000K CRI80 3360lm. Rated Luminaire luminous fluux 1721lm. Rated input power 60W, 220V-240V AC 50/60 HZ. Make: Disano, Neri, Kesselec, Klite. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP66, IK07, 40W LED (4000K) modern post top lantern type decorative light fixture with 4 Mtr. die cast aluminium pole of 100mm Dia. including following specifications: Die cast EN-AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws. Clear toughned glass 6mm thick. Luminaire with single cable entry and gormmet. Silicon gasket. Double powder paint. 150mm dia base plate with necessary bolts and fittings. Buried in ground upto 600mm depth. Powder coated as per approved colour with weather proof coat. All required cable connection with suitable MCB mounting inside the pole. 4000K CRI80 3360lm. Rated Luminaire luminous fluux 1721lm. Rated input power 40W, 220V-240V AC 50/60 HZ. Make: Disano, Neri, Kesselec, Klite. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP66, IK06, 12W LED Uplighter (spike/bracket type) with following specifications. 4000K. Luminaire housing & bracket made of die cast aluminium, aluminium & SS fasteners. Clear tempered safety glass. Mounting earth spike or die-cast bracket arrangement to facilitate easy installation at any desired location. Swivel range of the luminaire in the horizontal axis 0°-90°. Luminaire supplied with one metre cable length and a IP67 connector. Silicone gasket. Cable entries for through-wiring of mains supply cable. Integral constant current power supply. CRI ( Ra) : ≥80. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Contractor has to make 300mmx150mm deep or higher rcc foundation for spike/bracket fixing. Make: Dissano, Neri, Klite. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP66, IK06, 6W LED Uplighter (spike/bracket type) with following specifications. 4000K. Luminaire housing & bracket made of die cast aluminium, aluminium & SS fasteners. Clear tempered safety glass. Mounting earth spike or die-cast bracket arrangement to facilitate easy installation at any desired location. Swivel range of the luminaire in the horizontal axis 0°-90°. Luminaire supplied with one metre cable length and a IP67 connector. Silicone gasket. Cable entries for through-wiring of mains supply cable. Integral constant current power supply. CRI ( Ra) : ≥80. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Contractor has to make 300mmx150mm deep or higher rcc foundation for spike/bracket fixing. Make: Dissano, Neri, Klite. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP67, IK08, corrosion resistant 18W LED Asymmetrical Ground Burial type light fixture with following specifications. 4000K. Luminaire made up of die-casting dark grey powder coated aluminium, corrosion resistance with low copper content. Hard chromeplated stainless steel 316 grade front ring. Silicone seal gasket. Stainless steel screws. Step tempered glass of 7mm thickness with static load resistance of 1704 kgs. Optical reflector effeciency ≥85%. Luminaire hard wired with 3 x 1.0mm2 cable of 0.5mts length. Supplied with mounting sleeve for preparing recessed opening in ground. Integral power supply. Earth connection. Safety class I. Make: Neri, Ligman, K-lite. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP65, IK07, weather proof & corrosion resistant 12W LED Wall Down Light type fixture with following specifications. Square/Cylindrical Shape, open surface, medim wide beam angle with symmetrical distribution, 3000k. Die-cast aluminium housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket. High efficiency optical reflector. Clear toughened glass. Single cable entry. Housing is treated with a chemical chromatised protection before powder coating, ensuring high corrosion resistance. Fixture colour must be as per consultant/architect's approval. Make: Ligman, Neri, K-lite, Uniled. Contractor must submit the sample to the consultant/ architect before execution. Fixture warranty must be 3 years minimum.

SITC of IP65, IK08, 24W LED Open Surface Mounted Bulkhead type Light fixture with following specifications. Shielded, 3000k, Corrosion resistant die-cast aluminium frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket. Impact resistant UV stabilised polycarbonate diffuser. The luminaire is treated with a chemical, chromatised protection before powder coating, ensuring high corrosion resistance. Make: Ligman, Neri, K-lite, Uniled. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP20, indoor, open surface 20/30W round cylindrical down light type fixture with all required accessories. 4000K. Luminaire made of die-cast aluminium for better thermal management. Die-cast aluminium inner ring with reflector for uniform light distribution. High PF constant current LED driver. Cable entries for through-wiring of mains supply cable. 30° beam angle. Suitable for operation on 240V, 50Hz single phase ac supply. Safety class II. White powder coated body colour or as per approved by the architect/consultant. Make: Ligman, Neri, K-lite, Uniled, Abby. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP65, outdoor, open surface 18W round cylindrical down light type fixture with all required accessories. 4000K.Luminaire made of die cast aluminium, aluminium & SS fasteners. Clear tempered glass. Silicone gasket. Hybrid optics with lens & reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Cast aluminium plate for surface mounting onto the ceiling. Surface mounting on ceiling using hardware after connecting to the power supply. Cable entries for through-wiring of mains supply cable. Integral constant current power supply. CRI ( Ra) : ≥80 ( 90 CRI - On Request ). Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Make: Ligman, Neri, K-lite, Uniled, Abby. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP65, outdoor, 16W/18W round/square shape Bollard type light fittings with all required connections and accessories with following specifications. Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Shielded light source. For optimum illumination, these luminaires can be supplied in three different heights. Reflector system made of die-cast / spun aluminium. Non yellowing UV stabilized polycarbonate clear / translucent diffuser. Silicone gasket. Aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cable entries for through-wiring of mains supply cable. D183 Integral constant current power supply. CRI ( Ra) : ≥80 ( 90 CRI - On Request ). Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Contractor has to prepare required foundation base for the bollard. Make: Ligman, Neri, K-lite, Uniled, Abby. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP20, indoor, open surface, rectangle shape, 20W/30W line n dot linear type down light type fixture with all required accessories. upto 450mm length. Luminaire made of die-cast aluminium for better thermal management. Die-cast aluminium inner ring with reflector for uniform light distribution. High PF constant current LED driver. Cable entries for through-wiring of mains supply cable. 48° beam angle. Suitable for operation on 240V, 50Hz single phase ac supply. Safety class II. White powder coated body colour or as per approved by the architect/consultant. Make: Ligman, Neri, K-lite, Uniled, Abby. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP20, IK02, indoor, ceiling suspended/concealed/open surface 1200mm length, 20W/30W line n dot linear type down light type fixture with all required accessories. Luminaire made of die-cast aluminium for better thermal management. Die-cast aluminium inner ring with reflector for uniform light distribution. High PF constant current LED driver. Cable entries for through-wiring of mains supply cable. 48-50° beam angle. Suitable for operation on 240V, 50Hz single phase ac supply. Safety class II. Powder coated body colour as per approved by the architect/consultant. Make: Ligman, Neri, K-lite, Uniled, Abby. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

SITC of IP20, IK02, indoor, ceiling suspended/concealed/open surface 2400mm length, 40W/60W line n dot linear type down light type fixture with all required accessories. Luminaire made of die-cast aluminium for better thermal management. Die-cast aluminium inner ring with reflector for uniform light distribution. High PF constant current LED driver. Cable entries for through-wiring of mains supply cable. 48-50° beam angle. Suitable for operation on 240V, 50Hz single phase ac supply. Safety class II. Powder coated body colour as per approved by the architect/consultant. Make: Ligman, Neri, K-lite, Uniled, Abby. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.

ELV WORK- FAS. CCTV, TELEPHONE & DATA NETWORKING-Supply, Installation, Testing And Commissioning of Microprocessor based 1 loop capacity panel should be capable of expanding upto 10 loop,Networkable analogue addressable type fire alarm control panel with 640 character LCD display, each loop shall have a minimum capacity of 159 detectors & 159 devices analog in one loop. The Panel Shall have High-Speed Network Communications Module fiber-optic cable interface. The panel shall have integrated QWERTY Keypad, 4000 History logging event, Four access levels, capable of taking Flash Scan devices, flash EPROM, sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 240 volts AC power supply, automatic supervised battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 Minutes in emergency conditions as required.

Supply, Installation, Testing And Commissioning of UL Listed Analog addressable Self Acclimatising Multi Sensor smoke detector with mounting based LED, Address Switch from 01- 159, to programme the detectors, complete as per all requirements of technical specifications & contracts works. Approved Make: Notifier/Gamewell/Esser

Supply, Installation, Testing And Commissioning of UL Listed, Fixed temperature cum rate of rate of rise heat detector, Address Switch from 01-159, to programme the detectors, as per all requirements of technical specifications & contracts works. Approved Make: Notifier/Gamewell/Esser

Supply, Installation, Testing And Commissioning of UL listed, Flush or surface mounted Manual Call Point in manufacturers prescribed matching red enamel outlet box complete with key operated test-reset lock. The word FIRE shall appear in front of station as per all requirements of technical specifications & contracts works. Approved Make: Notifier/ Gamewell /Esser

Supply, Installation, Testing And Commissioning of UL Listed Surface mounted addressable type fully solid state circuitory dual tone Electronic hooters cum strobe lights of 110 Cd intensity. Approved Make: Notifier/ Gamewell/ Esser

Supply, Installation, Testing And Commissioning of Control Module for activation of third party services.Approved Make: Notifier/Gamewell/Esser

Supply, Installation, Testing And Commissioning of Monitor Module for monitoring of third party services. Approved Make: Notifier/Gamewell/Esser

Supply, Installation, Testing And Commissioning of UL Listed Isolator Module for fault isolator. Approved Make: Notifier/Gamewell/Esser

Supplying, installing, testing and commissioning of Power 100 / 120 W Amplifier

Supply, Installation, Testing And Commissioning of 6W Ceiling Mounted Speaker

Supplying, installing, testing and commissioning of Digital Power 100 W Amplifier. Approved Make: Notifier/Gamewell/Esser/Honeywell

Supply, Installation, Testing And Commissioning of UL Listed Ceiling/wall Mounted Voice Evacuation Speaker having power taps upto 2W and frequency response of 400 to 4000Hz for Voice Evacuation. Approved Make: Notifier/Gamewell/Esser/Hoenywell

Supply, Installation, Testing And Commissioning of Response Indicator for Above Ceiling Detector with neccessory mounting accessories. Approved Make: Notifier/Gamewell/Esser/Honeywell

Supply, Installation, Testing And Commissioning of Junction box for mounting the detectors and modules.

Supply, Installation, Testing And Commissioning of Junction box for mounting the speakers

Supply & laying of 2 Core X 1.5 sq.mm. FRLS Armoured PVC Insulated copper cable. Approved Make: Caliplast/Polycab/Finolex/RR Kabel

Supply & laying of 4 Core X 1.5 sq.mm. FRLS Armoured PVC Insulated copper cable. Approved Make: Caliplast/Polycab/Finolex/RR Kabel

Supply, Installation, Testing & Commissioning of IP Network IR Dome Camera, 1/2.8" CMOS, 2 MP, Min. Illumination required 0.05lux F1.4 color, 0Lux F1.4(IR on), 120dB True WDR, Min. Pixels 1920 × 1080, min. dual stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 30m IR distance, 128GB SD card support, H.265, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 66, IK10 rated vandal resisntant, Having Operating temp range : –30°C to 60° C. ONVIF Profile, cyber secured, UL, CE, FCC & RoHS certified. Approved Makes: Bosch, Axis, Honeywell, Avigilon

Supply, Installation, Testing & Commissioning of IP Network IR Bullet Camera, 1/2.8" CMOS, 2 MP, Min. Illumination required 0.05lux F1.4 color, 0Lux F1.4(IR on), 120dB True WDR, Min. Pixels 1920 × 1080, min. dual stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 60m IR distance, 128GB SD card support, H.265, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 66, Metal Body, Having Operating temp range : –30°C to 60° C. ONVIF Profile, cyber secured, UL, CE, FCC & RoHS certified. Approved Makes: Bosch, Axis, Honeywell, Avigilon

Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light PTZ Camera with auto tracking and face detection, 1/3" CMOS, Min 4 MP and 720p @ 60/50 fps, triple stream, Min. Illumination required Color: 0.05 Lux at F1.6, 0 Lux at F1.6 (IR on), 120dB True WDR, 4.5 mm - 135 mm 30x motorized focus & zoom lens, BLC, HLC, 3DNR, Defog, Privacy Mask, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1 out, PoE, H.265 and H.264 High Profile and MJPEG, PoE Class 4 and 24VAC, IP 66, Having Operating temp range : –30°C to 70° C. Certifications: ONVIF Profile S compliant, cyber secured, UL, CE, FCC & RoHS certified. Approved Makes: Bosch, Axis, Honeywell, Avigilon

Supply, Installation, Testing and Commissioning of 8 Channel NVR with 4 SATA, with 1080p Realtime Live View H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback Max 320 Mbps incoming bandwidth support 4 SATA HDDs up to 32TB, Supports fisheye videode-warping in local and web user interface,Supports visual or auditory notifications(a flashing light, bell,or siren) ONVIF compliant, UL, CE, FCC and & RoHS compliant. Approved Makes: Bosch, Axis, Honeywell, Avigilon

Supply, Installation, Testing and Commissioning of 32 Channel NVR with 8 SATA, with 1080p Realtime Live View H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback Max 320 Mbps incoming bandwidth support 8 SATA HDDs up to 64TB, Supports fisheye videode-warping in local and web user interface,Supports visual or auditory notifications(a flashing light, bell,or siren) ONVIF compliant, UL, CE, FCC and & RoHS compliant. Approved Makes: Bosch, Axis, Honeywell, Avigilon

Supply, Installation, Testing and Commissioning of 12 TB HDD for Storage Approved Makes: Segate / WD

Supply, Installation, Testing And Commissioning of Layer 2 Managed Gigabit POE switch with 24 # 10/100/1000BaseT ports and 2 # Gigabit Combo ports(RJ45/SFP), 2 # Gigabit SFP Port. Approved Make: HP/ Cisco

Supply, Installation, Testing and Commissioning of UTP CAT6 LSZH cable in prelaid PVC conduits / pipes / raceway, but without the cost of raceway or pipe. Approved Make: Polycab/Tyco/Molex

Supply, Installation, Testing and Commissioning of AT6 UTP RJ-45 LSZH Patch Cords Solid Conductor 3ft for data. Approved Make: Polycab/ Tyco/ Molex

Supply, Installation, Testing and Commissioning of AT6 UTP RJ-45 LSZH Patch Cords Solid Conductor 7ft for data. Approved Make: Polycab/ Tyco/ Molex

Supply, Installation, Testing and Commissioning of Single UTP CAT6 RJ-45 I/O of specified make inclusive of termination of CAT6 cable at each IO including Singlex Face Plate for mounting IO with required back box. Approved Make: Polycab/ Tyco/ Molex.

Supply, Installation, Testing and Commissioning of 6U Wall Mounting Rack for Floor Distribution. Approved Make: Tata/APW/Valrack

Supply, Installation, Testing and Commissioning of 42U Floor Mounting Rack for Floor Distribution. Approved Make: Tata/ APW/ Valrack

Supply, Installation, Testing and Commissioning of 6Core Fiber Cable for Building Connectivity. Approved Make: Polycab/Tyco/Molex/CIS

Supply, Installation, Testing and Commissioning of 6F LIU, 1U, LC SM OM2, Loaded Pigtails, Splice tray, adapter & splice protectors. Approved Make: Polycab/Tyco/Molex/CIS

Supply, Installation, Testing and Commissioning of Duplex LC To LC MM Fiber Patch Cord 3 mtr. Approved Make: Polycab/Tyco/Molex/CIS

Supply, Installation, Testing and Commissioning of 802.11ac Access Point Controller should operate in 2.4 GHz (450 Mbps or more) and 5 GHz simultaneously and capable of minimum 1.7Gbps on 5 Ghz for 802.11ac clients supporting minimum4x4 MIMO with 4 spatial streams. It must support minimum 3 concurrent MU-MIMO users (Thin & thick AP), with Mounting brackets. Approved Make: HP/Cisco

Supply, Installation, Testing and Commissioning of 802.11ac AP should operate in 2.4 GHz (450 Mbps or more) and 5 GHz simultaneously and capable of minimum 1.7Gbps on 5 Ghz for 802.11ac clients supporting minimum4x4 MIMO with 4 spatial streams. It must support minimum 3 concurrent MU-MIMO users (Thin & thick AP), with Mounting brackets. Approved Make: HP/Cisco

Supply, Installation, Testing & Commissioining of NMS for 25 Devices scalable to 50 devices. Approved Make: HP/ Cisco

Supply, installation, Testing & Commissioining of 24 Port fully loaded patch panel

Supply, Installation, Testing And Commissioning of Layer 2 Managed Gigabit Non-POE switch with 24 # 10/100/1000BaseT ports and 2 # Gigabit Combo ports(RJ45/SFP), 2 # Gigabit SFP Port. Approved Make: HP/Cisco

Supply, Installation, Testing And Commissioning of Layer 2 Managed Gigabit Non-POE switch with 16 # 10/100/1000BaseT ports and 2 # Gigabit Combo ports(RJ45/SFP), 2 # Gigabit SFP Port. Approved Make: HP/Cisco

Supply, Installation, Testing and Commissioning of 12F LIU, 1U, LC SM OM2, Loaded Pigtails, Splice tray, adapter & splice protectors. Approved Make: Polycab/ Tyco/ Molex/ CIS

Supply & laying of 25 mm dia. rigid PVC conduit of 2.0-2.2 mm thick heavy gauge with all accessories.

Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required. 10 pair Krone type tag block

Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required. 50 pair Krone type tag block

Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required. 100 pair Krone type tag block

Supply and laying of specified make 0.51 mm dia Tinned copper Armoured telephone wire 10 pair telephone wire

Supply and laying of specified make 0.51 mm dia Tinned copper Armoured telephone wire 50 pair telephone wire

Supply and laying of specified make 0.51 mm dia Tinned copper Armoured telephone wire 100 pair telephone wire

Supply, Installation, Testing and Commissioning of Caller ID Telephone Instruments

Telephone System:Supply, Installation, testing and commissioning of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots, 1 PRI, 104 nos of Extensions, 4 nos of IP channels, CPU and Power supply hot swappable (Redundancy), 8 port digital for KTS, 4-Port builtin GSM required (Sim Card), built in voice recording, Long distance capability required, outlook integration required for all users. Approved Make: NEC/ NEOS Infinity/ Avaya/ Panasonic

Supply, Installation, Testing and Commissioning of Operator Console at Reception. Approved Make: Neos/Beetel/Panasonic/NEC

Supply, Installation, Testing and Commissioning of Director phone with KTS. Approved Make: Neos/Beetel/Panasonic/NEC

SITC of Boom Barrier system for basement parking entry and exit area with all accessories and following specifications. Boom Length (mt)- 6. Height of Boom from ground- 884-914 (Approx mm). Housing Dimensions (Approx mm)450 x 295 x 1007. Boom Dimension (mm)- 100 x 40. Controller Protecting Rating-IP54. Control Panel Power Supply (V) 230 A.C.50/60Hz. Motor Power Supply (V) 24 D.C. Power- 300W. Current Draw (A)- 1.5. Torque (Nm)-600. Opening Time (Sec)-3 to 6. Duty Cycle-Intensive use. Operating Temp. (°C) : -20 to +55. Bar with protective rubber profile to prevent injury in case of any contact. Circular boom section. Loop Detector. Traffic/flashing light. Including both manual and automatic operation. Optical beam sensor inclusive. Programmable for fast and low speed traffic. inclusive of electrica panel to accept signals for various controls and safety accessories.

EQUIPMENTS & OTHER SERVICES- Liaison fees for preparing necessary documents and drawings for getting N.O.C from Electricity Co. and Electrical Inspector for the installation of 11 KV / 0.433 KV Electrical L.T distribution sub stations. (All statutory fees will be paid by client)

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free batteries. The charger having operating capacity for input 160-270V AC & inverter having output 23OV,5O Hz Ac with 0.8 load power factor with battery, over under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries. (D) 5 KVA (i)With 11 Nos. of 12 V 55 Ah SMF batteries

Supply, Installation, Testing & Commissioning of Solar Roof Top Panels including all type of connections and equipments. Including all type of fabrication work, inverters, AC/DC distribution boards, cables, earthing. Cables on solar panels must be tied with the aluminium cable tie. Cement foundation of the fabrication must be in round shape and covered in pvc pipe of required size. Contractor must need to submit the layout of the solar roof top panel installation and approve the sample work with the architect/consultant/authorized government official. 5 years maintenance warranty shall be in the contractor's scope for all the equipments used and the installation work. Make: Adani make solar panel. Government Approved make solar inverter.

SITC of Lift suitable for min. 6/8 Passengers upto 20 Mtr. height with following specifications. (1200mm x 1400mm) Make: Mitsubishi, Schindeler, Kone. Load- 408kg/ 6 passengers.Speed- 0.63 mps. Direction- All at the same side. Rise Mts.- 20 Mts. Overhead- 4.8Mts. Power supply- 400 volts, 3-Phase, 50 Hz AC. Light Supply: 230 Volts, 50 Hz Single Phase. Machine- Geared placed above the hoistway in machine room. Control- Microprocessor based controller with VVVF. Operation- Down Collective ,Simplex. Platform Size (W * D ) -mm & Hoistway Require ( W * D ) -mm Car Enclosure- As per Standard. Flooring- PVC. False Ceiling- Standard. Car Door Type- Protected by S.S. Closed Door with Center Opening. Clear. Entrance Size ( W * H ) -mm- Standard. Landing Door- Same sa Lift doors. Door Frame- Standard. Door Operation- Automatic. Std. Fixtures/Signals: Touch Panel with Updown arrow, Auto/Manual Fan On/Off, Battery Operated Alarm Bell + Emergency Light, Automatic Rescue Device.

SITC of Lift suitable for min. 6/8 Passengers upto 15 Mtr. height with following specifications. (1200mm x 1400mm) Make: Mitsubishi, Schindeler, Kone. Load- 408kg/ 6 passengers.Speed- 0.63 mps. Direction- All at the same side. Rise Mts.- 20 Mts. Overhead- 4.8Mts. Power supply- 400 volts, 3-Phase, 50 Hz AC. Light Supply: 230 Volts, 50 Hz Single Phase. Machine- Geared placed above the hoistway in machine room. Control- Microprocessor based controller with VVVF. Operation- Down Collective ,Simplex. Platform Size (W * D ) -mm & Hoistway Require ( W * D ) -mm Car Enclosure- As per Standard. Flooring- PVC. False Ceiling- Standard. Car Door Type- Protected by S.S. Closed Door with Center Opening. Clear. Entrance Size ( W * H ) -mm- Standard. Landing Door- Same sa Lift doors. Door Frame- Standard. Door Operation- Automatic. Std. Fixtures/Signals: Touch Panel with Updown arrow, Auto/Manual Fan On/Off, Battery Operated Alarm Bell + Emergency Light, Automatic Rescue Device.

SITC of Lift suitable for min. 6/8 Passengers upto 10 Mtr. height with following specifications. (1200mm x 1400mm) Make: Mitsubishi, Schindeler, Kone. Load- 408kg/ 6 passengers.Speed- 0.63 mps. Direction- All at the same side. Rise Mts.- 20 Mts. Overhead- 4.8Mts. Power supply- 400 volts, 3-Phase, 50 Hz AC. Light Supply: 230 Volts, 50 Hz Single Phase. Machine- Geared placed above the hoistway in machine room. Control- Microprocessor based controller with VVVF. Operation- Down Collective ,Simplex. Platform Size (W * D ) -mm & Hoistway Require ( W * D ) -mm Car Enclosure- As per Standard. Flooring- PVC. False Ceiling- Standard. Car Door Type- Protected by S.S. Closed Door with Center Opening. Clear. Entrance Size ( W * H ) -mm- Standard. Landing Door- Same sa Lift doors. Door Frame- Standard. Door Operation- Automatic. Std. Fixtures/Signals: Touch Panel with Updown arrow, Auto/Manual Fan On/Off, Battery Operated Alarm Bell + Emergency Light, Automatic Rescue Device.

SITC of 500KVA Unitised Sub-Station with following specifications. IEC 62271-202, IS2026. IP54 for HT &Lt compartment. IP23D for Transformer compartment. Enclosure Class K10. Non-walk in type. Hermetically sealed Dry type transformer. As per the latest government norms. KVA Rating-500kva, HV voltage-11000 volts, LV voltage-433 volts, 3-phase, 50hz, Dry type, Air cooled, HV Connection- Delta, LV Connection- Star, Vector Group- Dyn11, Tapping on HV side- ±5% in steps of 2.5%, Eficiency at 100% Load- 99.01%, efficiency at 75% load- 99.18%, efficiency at 50% load- 99.32%, Temperature rise-50°C. Low noise level. Make: Kirloskar, ABB, Schneider, Eaton. The rate shall include the following : Supply and delivery of the USS at site. Unloading of USS at site. Shifting of USS with all tools, equipment & accessories from site store to the site and placing it on the plinth at site. Earthing of USS neutral & body. Charging gradually as per IS. Contractor has to submit all the test certificates to the site incharge.

Providing and fixing wsh down water closet with concealed cistern including all fittings and accessories like bracket frame, dual slufh face plate etc. (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour including all accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing under counter washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour including all required accessories and connections like bottle trap, waste etc. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing stainless steel toilet paper holder. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap including all required accessories and connections. (i) 15mm dia. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. including all required accessories and connections. (i) 15mm dia. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. including all required accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing of Urinal Partition of 900mmx450mm, frosted glass with ss hardware fittings and screws.

Providing and fixing C.P. ss towel rail comlete with C.P. brass/ ss brackets fixed to wooden plugs with C.P. brass/ ss scews.(B) 600mm x 20mm size.

Providing and fixing Kitchen stainless steel sink with C.I/M.S./SS brackets or frame painted white or as per approved by the architect including cutting holes in walls and making good the same including all fittings. (i) 625mm x 445mm x 200mm size. Make: Jaquar, Nirali, Carysil high end series.

Providing and fixing Kitchen stainless steel sink with C.I/M.S./SS brackets or frame painted white or as per approved by the architect including cutting holes in walls and making good the same including all fittings. (i) 820mm x 510mm x 200mm size. Make: Jaquar, Nirali, Carysil high end series.

Providing and fixing screw down 2-way bib cock of following size. Brass chromium plated 2-way bib cock (i) 15 mm.(Make: Hind ware/cera/jaquar/Grohe) including health faucet, 1.2 mtr long pvc tube and walk hook with all required accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.

Supply, installation, testing and commissioning of auto closing concealed push button for urinal flushing with all required accessories and fitting. Make: Jaquar, Kohler, Grohe, Cera high end series.

Supply, installation, testing and commissioning of brass chromium plated 4way shower diverter, spout with hand shower provision & 6inch dia wall fixed shower 15/20mm including all fittings, accessories and connections. Make: Jaquar, Grohe, Hindware, Kohler, Cera

Providing and fixing Angle tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. (Make: Hind ware/cera/jaquar/Grohe) including all required accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing 450mm Long Braided Hose pipe with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Wash Basin, Kitchen Sink etc.) of approved make and conforming to Manufacturers Standards. Make: Jaquar, Kohler, Grohe, Cera high end series.

Supply, storing, installation and testing twin coat hook, fixed to wall / door with concealed CP screws etc. complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.

Providing and fixing of grab bars 300 mm Stainless steel in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.

Providing and fixing of grab bars Vertical Swing 18-8 S, type-304, 18-gauge (1mm) stainless steel tubing with satin-finish. 1–1/4 (25mm) outside diameter wall mounted in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.

Providing and Fixing of Stainless Steel Hand Dryer with all required connections and following specifications. Weld-free cover fixed to the base with two safety screws and lock withspecial speedflow key. Aluminium base. Includes silent-blocks to damp mechanical vibrations. Fire resistant plastic UL 94-V0 fan scroll. High-speed motor with safety thermal cut-off.The motor revolutions canbe adjusted manually by the potentiometer. • Aluminium centrifugal double asymmetrical inlet fan wheel. Disconnects automatically after 60 seconds of continuous use. Electronic infrared detection sensor. Adjustable detection by potentiometer(5- 25 cm). Ultra-flat: 10 cm deep (complies with ADA regulations). complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.

Providing and fixing of bathing accessories set of one pair of soap dish holder, one no. tumbler holder, one no. napkin ring, one no. 600mm glass shelf with all required fittings and accessories.

Supply and installation of Stainless Steel Handwash Liquid Dispenser with all required fittings and accessories. Make: Jaguar/ Kohler/ Grohe/ Cera

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, pre filter housing with 'O' ring pre sediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank

WATER SUPPLY Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. 65mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. 80mm. Make: Astral, Supreme, Finolex, Prince

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings . Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(Ac Drain) Make: Astral, Supreme, Finolex, Prince

Providing laying and jointing in true line and level 20mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. Make: Astral, Supreme, Finolex, Prince

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittingsThis includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints, including cost of all materials complete as per direction of Engineerin-Charge. Make: Astral, Supreme, Finolex, Prince

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings. This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints, including cost of all materials complete as per direction of Engineerin-Charge. Make: Astral, Supreme, Finolex, Prince

Providing laying and jointing in true line and level 65mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings. This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints, including cost of all materials complete as per direction of Engineerin-Charge. Make: Astral, Supreme, Finolex, Prince

Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 25mm diameter. Make:ZOLOTO/VTC/SANT

Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 32mm diameter (Make:ZOLOTO/VTC/SANT)

Providing and Fixing CPVC ball valve with all required accessories and connection. 25mm dia. Make: Astral, Prince, Finolex, Supreme

Providing and Fixing CPVC ball valve with all required accessories and connection. 32mm dia. Make: Astral, Prince, Finolex, Supreme

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 50 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Supplying, Installing, testing & Commissioning in position electrically operated level sensor based 32mm diameter solenoid valve with level electroeds for water tank inlet as shown in drawing & specified in specifiaction including weather proof housing,control panel, isolator, cables, accessories etc complete.Item including all accessories for satisfactory installation complete. Any standard ISI make.

Providing erecting and fixing double coated SIntex or equivalent PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. (Make: Sintex / Kaka )

DRAINAGE Providing, laying and jointing in true line and level 40mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 50mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 110mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, fixing and testing PVC Deep seal P-Trap of 110 X 110 mm dia diameter, with necessary distance piece of 75mm dia pipe and 150 x 150mm heavy duty PVC three piece grating, making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)

Providing, fixing and testing PVC Height Riser with wings of 110 X 50 X 40 mm dia diameter, with necessary suported accessories, making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 150 mm diameter) Make: Astral, Supreme, Finolex, Prince

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 200 mm diameter). Make: Astral, Supreme, Finolex, Prince

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and specials of 160mm diameter including cost of conveyance from stores to site of works including cost of labour, material, cement solvent, giving satisfactory hydraulic testing as per ISI code. Make: Astral, Supreme, Finolex, Prince

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and specials of 200mm diameter including cost of conveyance from stores to site of works including cost of labour, material, cement solvent, giving satisfactory hydraulic testing as per ISI code. Make: Astral, Supreme, Finolex, Prince

Excavation for foundation/utility services upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift.(E) Hard Rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering. (Ramping by manual or mechanical means)

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 200 mm diameter). Make: Astral, Supreme, Finolex, Prince

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete.(ID 300 mm diameter). Make: Astral, Supreme, Finolex, Prince

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type (make-Local )

Providing and fixing, best Indian make 1st quality, salt glazed PVC Sewer (intercepting) trap, of 150 mm. x 150 mm. size with cleaning eye cap and metal stopper chain, set in CC 1:2:4 etc., complete in last manhole including vent / fresh air pipe.

Construction of Manhole chambers 600mm X 600 mm and depth 1.0 m in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6. With precast slab in two parts 15mm.

Providing & Fixing of factory made Precast Chamber, having size (in to in) of 800 mm (L) X 800 mm (B) X Height : 800 mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500 D reinforcement. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Cut out holes hole should be provided for utility connection as per the requirement.The Precast cover having size 944 x 944 X 120 mm thick , designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500D reinforcement. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge, including making cut-outs, core cutting for ducts. Brand: Fuji Silvertech, and equivalent. Make: Fuji Silvertech or equivalent

Extra rate for every 200 mm additional depth of precast manhole of size 800x800. Make: Fuji Silvertech or equivalent

Providing & Fixing of factory made Precast Chamber, having size (in to in) of 1000 mm (L) X 1000 mm (B) X Height: 1000, mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 /Fe 500 D shall be used for reinforcement. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope.The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site requirement.The Precast cover having size 1144 x 1144 X 150 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 / 500D shall be used for reinforcement. Cover should have conical shape of 50 mm to 30 mm respectively for storm water intake. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge. Make: Fuji Silvertech or equivalent

Providing & Fixing of factory made Precast Chamber, having size (in to in) of 1000 mm (L) X 1000 mm (B) X Height: 1200, mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 /Fe 500 D shall be used for reinforcement. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site requirement.The Precast cover having size 1144 x 1144 X 150 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 / 500D shall be used for reinforcement. Cover should have conical shape of 50 mm to 30 mm respectively for storm water intake. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge. Make: Fuji Silvertech or equivalent

Providing & Fixing of factory made Silvertech brand Precast Chamber, having size (in to in) of 1000 mm (L) X 1000 mm (B) X Height :1400 mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder streExcavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope.The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Hole should be provided at site (No Factory) for connection at the waffle side of chamber as per the site requirement.The Precast cover having size 1144 x 1144 X 150 mm thick, designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & Fe 500 / 500D shall be used for reinforcement. Cover should have hole of conical shape of 50 mm to 30 mm respectively for storm water intake. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, including making cut-outs, core cutting for utility ducts as per approved QAP as by Engineer In charge. (Make: Fuji or equivalent)

Providing and fixing C.I. cover with frame (Medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg.

Providing laying (to level or slopes) and jointing reinforced concrete pipe Light duty non-pressure pipes I.S. class NP3 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(D) 300mm (upto 10 ton) (Local Make)

RAIN WATER DISPOSAL Providing, laying and jointing in true line and level 110 mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make: Astral, Supreme, Finolex, Prince

Providing, laying and jointing in true line and level 150 mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 150 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make: Astral, Supreme, Finolex, Prince

Providing, Fixing, Installation and Testing of 100mm rainwater outlets 2HP-2W/3HP-2W/ 4HP-2W* are to be ACO Building Drainage HP Two-Way screw outlets with locked flat grating supplied by ACO Building Drainage SG17 5TE. All components to be manufactured from grade LM6 aluminium alloy to BS 1490/ gun-metal to BS EN 1982. complete as per site engineer in charge. Make: Astral, Supreme, Finolex, Prince

Providing, Fixing, Installation and Testing of 150mm rainwater outlets 2HP-2W/3HP-2W/ 4HP-2W* are to be ACO Building Drainage HP Two-Way screw outlets with locked flat grating supplied by ACO Building Drainage SG17 5TE. All components to be manufactured from grade LM6 aluminium alloy to BS 1490/ gun-metal to BS EN 1982. complete as per site engineer in charge. Make: Astral, Supreme, Finolex, Prince

Providing and fixing, PVC cowl, 110mm diameter on PVC ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified and required, etc. complete. Make: Astral, Supreme, Finolex, Prince

Providing and fixing, PVC cowl, 150mm diameter on PVC ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified and required, etc. complete. Make: Astral, Supreme, Finolex, Prince

Providing & fixing of factory made FUJI SIlvertech Precast(DUSD) U shape surface storm water drain having size of 300 mm width x 300 mm height into in dimenson from top, having units of2000 mm long, T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Fe 500 / Fe500D shall be use for reinforcement. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each Storm water drain for jointing two precast drains using cement mortar or suitable non shrink grout. The precast Storm water drain must consist of special in built inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation ,installation on specific location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer incharge.

Providing & fixing of factory made FUJI Silvertech Precast Lid having length of 500 mm, width suitable for placing on U - Shape Drain (DUSD) sizes 300 x 300 & having thickness of 110 mm. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The Fe 500/ Fe500D shall be used for reinforcement. Lid should have Plain Surface at Top.The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer Incharge.

Providing & fixing of Factory made FUJI Precast Perforated Lid having length of 500 mm, width 410 mm suitable for placing on U - Shape Drain (DUSD) sizes 300 mm x 300 mm (in to in) & having thickness of 110 mm respectively. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for reinforcement. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The Perforated lid unit should have 10 slits each of 95 mm X 20 mm slit for storm water intake. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Providing & fixing of factory made FUJI SIlvertech Precast(DUSD) U shape surface storm water drain having size of 450 mm width x 450 mm height into in dimenson from top, having units of2000 mm long, T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Fe 500 / Fe500D shall be use for reinforcement. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each Storm water drain for jointing two precast drains using cement mortar or suitable non shrink grout. The precast Storm water drain must consist of special in built inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation ,installation on specific location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer incharge.

Providing & fixing of Factory made FUJI Silvertech Precast Lid having length of 500 mm, width suitable for placing on U - Shape Drain (DUSD) sizes 450 x 450 thickness of 130 mm. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The Fe 500/ Fe500D shall be used for reinforcement. Lid should have antiskid finish at Top.The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer Incharge.

Providing & fixing of factory made FUJI Precast Perforated Lid having length of 500 mm, width 572 mm suitable for placing on U - Shape Drain (DUSD) sizes 450 mm x 450 mm (in to in) & having thickness of 130 mm respectively. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The Fe 500/ Fe500D shall be used for reinforcement. The Perforated lid unit should have 10 slits each of 135 mm X 20 mm slit for storm water intake. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Providing & fixing of factory made FUJI SIlvertech Precast(DUSD) U shape surface storm water drain having size of 600 mm width x 600 mm height into in dimenson from top, having units of2000 mm long, T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Fe 500 / Fe500D shall be use for reinforcement. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each Storm water drain for jointing two precast drains using cement mortar or suitable non shrink grout. The precast Storm water drain must consist of special in built inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation ,installation on specific location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer incharge.

Providing & fixing of factory made FUJI Silvertech Precast Lid having length of 500 mm, width suitable for placing on U - Shape Drain (DUSD) sizes 600 x 600 thickness of 145 mm. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for reinforcement. Lid should have antiskid finish at Top.The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer Incharge.

Providing & fixing of factory made FUJI Precast Perforated Lid having length of 500 mm, width 732 mm suitable for placing on U - Shape Drain (DUSD) sizes 600 mm x 600 mm (in to in) & having thickness of 145 mm respectively. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The Fe 500/ Fe500D shall be used for reinforcement. The Perforated lid unit should have 15 slits each of 120 mm X 20 mm slit for storm water intake. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Providing & fixing of factory made FUJI SIlvertech Precast(DUSD) U shape surface storm water drain having size of 750 mm width x 750 mm height into in dimenson from top, having units of2000 mm long, T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Fe 500 / Fe500D shall be use for reinforcement. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each Storm water drain for jointing two precast drains using cement mortar or suitable non shrink grout. The precast Storm water drain must consist of special in built inlets at appropriate location for fixing De-shackle for mechanical installation , including supply ,transportation ,installation on specific location at site in line ,level , gradient and plumb with necessary testing commissioning etc complete as per instruction of engineer in charge. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer incharge.

Providing & fixing of factory made FUJI Silvertech Precast Lid having length of 500 mm, width suitable for placing on U - Shape Drain (DUSD) sizes 750 x 750 thickness of 150 mm. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The Fe 500/ Fe500D shall be used for reinforcement. Lid should have antiskid finish at Top.The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake.Each Lid may have in built specially design inserts of appropriate load carrying capacity arrangment and fixed at specific location to avoid the tilting of the lid for safe & fast installation. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer Incharge.

Providing & fixing of factory made FUJI Precast Perforated Lid having length of 500 mm, width 902 mm suitable for placing on U - Shape Drain (DUSD) sizes 750 mm x 750 mm (in to in) thickness of 150 mm respectively. Lid should have T-25 load carrying capacity – 10 T Axle Load – 5 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope. The Fe 500/ Fe500D shall be used for reinforcement. The Perforated lid unit should have 20 slits each of 120 mm X 20 mm slit for storm water intake.Each lid may have in-built, specially designed lifting inserts of appropriate load carrying capacity and fixed at specific location to avoid the tilting of the lid for safe & fast installation. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Providing & fixing of factory made FUJI Silvertech Precast Box Drain having 300 mm width X 300 mm height in to in dimension from top, units of 2000mm length, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, made by using advanced Japanese Technology having High Performance Self Compacting Concrete of M40 Grade cylinder strength/ M50 Grade cube strength and using Fe 500/Fe 500D reinforcement bar designed for 5 T wheel Load with 0.1 m to 3 m earth cushion above it. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope.Product also includes, groove for fixing rubber gasket, T -Jointing arrangements to fix the two box drain by nut & bolt and special in-built Screw hanger at appropriate locations for faster & safe installation of the product. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

Providing & fixing of factory made FUJI Silvertech Precast Box Culvert having 500 mm Width X 500 mm Height in to in dimension , units of 2000mm length, confirming to Japanese Industrial Standards (JIS) & meeting IS requirements, made by using advanced Japanese Technology having High Performance Self Compacting Concrete of M40 Grade cylinder strength/ M50 Grade cube strength and using Fe 500/Fe 500D reinforcement bar designed for 5 T wheel Load with 0.2 m to 3 m earth cushion above it. Excavation, back filling, preparing pcc foundation and all material transporation shall be on contractor's scope.Product also includes, groove for fixing rubber gasket, flange coupling jointing arrangements and special in-built hanging brackets at appropriate locations for faster & safe installation of the product. In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge.

SITE DEVELOPMENT- STP, PUMPROOM, PERCOLATION WELLPreparing structural design of RCC Under Ground / Partially under ground /above high ground level Reservoir and constructing of required capacity as per relevant I.S. standards in M30 concrete grade with HYSD Fe 500D reinforcement and constructing the same, including excavation in all types of soil strata (including rock) including shoring strutting if required, for loose soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff at all lead. Including cement plaster in CM 1:2 with approved water proofing compound to all over inside container (i.e. walls, base, top slab/dome bottom etc. all). Including Soil testing. Including all types of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design. Providing and fixing accessories, CI Manhole frame and cover, water level indicator, adequate cowl type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for valves. Providing and applying three coats of cement paint / snowcem to the out side face of structure. It also includes satisfactory water tightness test as per relevant I.S. code and painting name of scheme and capacity on the tank as per direction of engineer in charge.

(A) Providing sock pit of 2.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton)

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton)

C.I. cover with frame (Light duty) 600mm x 600mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

Providing and fixing cast iron steps of size 250mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete.

Supply, installation, testing and commissioning of one no. 230KLD Sewage Treatment Plant, underground (for overall college campus site) and 2 nos. 10KLD Effluent Treatment Plant, underground (for laboratories) with all required civil work including labour and material with all necessary equipment and accessories. Contractor must consider the supervision for the plant working for minimum twice in a month for at least 5 years. Equipments make must be standard and contractor has to get the approval of the make from the consultant.

Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 50 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 80 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 100 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Supply, fixing and jointing of heavy class GI puddle flange pipes epoxy coated, 150 mm dia and minimum 400 mm long clear ends outside the RCC surface, and fixed in underground sumps, water tanks etc. complete, with end joints either screwed / flanged as required with endcaps / plugs complete as per the requirement of E-i-C (Local Make)

Providing and fixing electronic type level indicator for water tanks mounting in panel with level display, alarm (level low or high), and manual reset for alarm, potential free set point contacts etc. complete with electrical wiring to probes and all accessories complete the work. Provision to connect to the building Automation system or pump controller through a suitable port.(Make: Wilo)

Supply of Submersible single stage single entry pumps connected to submersible motor (The motor shall be watertight according to IEC class IP 68, and incorporate class F insulation materials to withstand a continuous operating temperature of 155 deg C) for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with Double mechanical seal, pump connector unit with rubber diaphragm and bend, electrical panel with in built level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain or guide rail. (Pumps shall be installed in a set of two pumps One working and One standby, with cascade operation).Pumps suitable to handle solids upto 40 mm size with C.I. body, SS304 impeller & SS shaft with 10 mtrs cable, double mechanical seal.Electrical Starter panels complete with Over load & Under Current Relay with Single phasing preventer feature,ON-OFF and Trip Indicating lamps, contactors contacts for BMS System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc.including with discharge valve and NRV, suitable for the motor H.P. as specified below. As per complete company Fitted and tested system Capacity per pump - 1.39 LPS [5 m3/hour], System Flow - 2.78LPS [10 m3/hour], Head:- 18-20 mtr. 2 Nos. Pumps (1 Working + 1standby). Make: Wilo, Kirloskar, Grundfos

Supply, installation, testing & commissioning of Submersible Open well single stage single entry pumps with C.I Casing, C.I Impeller and SS Body SS-304 Shaft,connected to TEFC submersible motor for 415 + 10% volts, 1 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, electrical panel with in built level controller with operational mode as pump working at low level, as well pump at high level with a hooter alarm and cut off at dry level as determined. The pump shall be provided with a lifting devise of pull chain/guide rail & G.I. heavy class rising main of 1.0 m length including interconnecting piping, valves (Ball Valve / Butterfly), Non return valves (GM/CI) 15 m cable etc. as per requirement complete in all respects. (Pumps shall be installed in a set of One pump operation).Electrical Starter panels complete with O/L Relay with Single phasing preventer feature, earth leakage relay, ON-OFF and Trip Indicating lamps, contactors contacts for Building Automation System, interlocking, level controller with operational mode as one pump working at low level, both pumps at high level with a hooter alarm and cut off at dry level, cascade operation, working / standby slelction, etc. suitable for the motor H.P. as specified below and with provision for remote P.B. on/off complete as required. The on/off operations for all pumps shall be available on central BMS system Capacity per pump - 1.11 LPS [4 m3/hour], System Flow - 2.22LPS [8 m3/hour], Head:- 25-30 mtr. 2 Nos. Pumps (1 Working + 1standby). Make: Wilo, Kirloskar, Grundfos

Supply, installation, testing and commissioning of percolation well including all work like drilling, compressor work, gravel packing, mud slurry disposal, clay packing and including of all materials like 300mm UPVC pipe, 300mm wire screens, 300mm collar joint, accessories, gravels, sand, sand filteration module etc. Site cleaning, mud pit, mud refilling for borewell must be in the contractor's scope. Contractor has to maintain the percolation well upto three years after installation.

IRRIGATION WORK Providing, laying & jointing in position PVC/ HDPE pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction.PVC pipe 90mm-10 kg/cm2- Make: Astral, Supreme, Finolex, Prince

PVC pipe 90mm-6 kg/cm2- Make: Astral, Supreme, Finolex, Prince

PVC pipe 75mm-6 kg/cm2- Make: Astral, Supreme, Finolex, Prince

PVC pipe 63mm-6 kg/cm2- Make: Astral, Supreme, Finolex, Prince

PVC pipe 50mm-6 kg/cm2- Make: Astral, Supreme, Finolex, Prince

PVC pipe 40mm-6 kg/cm2- Make: Astral, Supreme, Finolex, Prince

Earth work excavation and refilling 300x450mm

Providing & fixing of PGP ULTRA, Pop-up ROTOR sprinkler having variable adjustable arc (50 to 360 degrees)nozzle capable of covering 4.9m -14.0 m at 2.5 Bars with discharge rate of 0.02- 0.891Lps.The Rotor body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic with small exposed cover. Make: Hunter

Providing & fixing of I-25, Pop-up ROTOR sprinkler 11.9-21.6 mtr radius rotor with automatic arc return and non strippable drive part and full circle in one model stainless steel riser,flow 13.6 to 120.7lpm - with CV (I-25 )- Hunter (USA). It should have vandalism proof features like automatic arc return, full and part in one and non strippable gear drive. Make: Hunter /Weathermatic /Senninger/ Toro

Providing & Fixing of SJ- 712, 3/4" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic. . Make: Hunter

Providing and fixing of PP service saddle of varying size.3/4'. Make: Rainson, Accutech or Equivalent

Providing & fixing of Rotatory Pop up having colour coded MP Rotator nozzle with multiple stream water spray capable of covering 2.5m- 10.7m with Matched Precipitation Rate .The Spray Head body shall be constructed of heavy-duty, ultraviolet resistant plastic and stainless steel spring with mutifunctional wiper seal with small exposed cover. Make: Hunter

Providing & fixing of PS- Ultra, Pop up spray head bodies, having features an encased plastic 'cage' to provide unmatched resistance to grit,with high efficiency ADJUSTABLE nozzle capable of covering 1.2M -5.2m at 1.0 - 2.1 Bars, pressur. Additionally Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic. Make: Hunter

Providing & Fixing of Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic. Swing Connecting Assembly, 1”- Hunter (USA). Make: Hunter /Weathermatic /Senninger/ Toro

Providing and fixing of PP service saddle of varying size.1". Make: Rainson /Jain/ Supreme/Finolex/PIMTAS

Providing & fixing of Rotatory Pop up having colour coded MP Rotator nozzle with multiple stream water spray capable of covering 2.5m- 10.7m with Matched Precipitation Rate .The Spray Head body shall be constructed of heavy-duty, ultraviolet resistant plastic and stainless steel spring with mutifunctional wiper seal with small exposed cover. Make: Hunter or equivalent

Providing & Fixing of SJ- 512, 1/2" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic. Make: Hunter or equivalent

Providing and fixing of PP service saddle of varying size.1/2'. Make: Rainson, Accutech or Equivalent

Supply and fixing of flexible Blank tubing and resistance to UV damage and algae growth black in colour 16 mm size. With all fittings and accessories.( Dripline 16 mm 50 cm 3.8 lphinline lateral) Make: Jain, Netafim, Rivulis or equivalent

Supply and fixing of flexible Blank tubing and resistance to UV damage and algae growth black in colour 16 mm size. With all fittings and accessories.( Plain Dripline 16 mm plain lateral). Make: Jain, Netafim, Rivulis or equivalent

Supply and fixing of PC dripers 8lph.Make: Jain, Netafim or equivalent

Supply and Fixing Rod Comes Pre -Bent or plastic lateral stack to Staple Distribution Tubing , Drip Line to Finished Grade. Make: Jain, Netafim, Polysil or equivalent

Providing and fixing of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve of size 63mm. Make: AUTOMAT, FITVALF, JAIN or Equivalent

Providing and fixing offlush valve 63mm/50mm/40mm. Make: Jain, Finolex, Plaison

Providing & fixing of Isolation Valve in mainline for bypass and flow diversion of approved quality 90mm. Make: LP, Carter, Zoloto

Providing & fixing of Isolation Valve in mainline for bypass and flow diversion of approved quality 75mm.Make: LP, Carter, Zoloto

Providing & fixing of a double acting 1" Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Including service saddle and riser assembly. Make: Bermad, Harit or Equivalent

Providing & fixing of a double acting 2" Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Including service saddle and riser assembly. Make: Bermad, Harit or Equivalent

Providing & fixing of 12" Rectangular Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. Make: Ecorain or equivalent

Providing & fixing of 10" Round Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. Make: Ecorain or equivalent

Providing & fixing of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. Make: Ecorain or equivalent

Providing & fixing of Brass Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring. Including service saddle and riser assembly. Make: Aqua, Acutech or equivalent

Providing & fixing of Brass Key threads into top of QCV to provide water access And Brass Swivel Elbow. Make: Aqua, Acutech or equivalent

Providing & Fixing of (Monoblock/Openwell submersible) pumpset of having discharge 6.5 lps@52-54 mtr head . suitable for pumpset having panel box and fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, etc. (1W+1S). Make: Kirloskar, Anson, Lubi or equivalent

Providing & Fixing of (Monoblock/Openwell submersible) pumpset of having discharge 6 lps@68-70 mtr head . suitable for pumpset having panel box and fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, etc. (1W+1S). Make: Kirloskar, Anson Lubi or Equivalent

Providing and fixing of control panel suitable for pumpset having panel box and fixed alongwith following accessories starter ,start / stop push buttons , Ammeter, Voltmeter , Indicating lamps, MCB , with cable, etc. Make: Legrand, Schneider, L&T, ABB

Providing & Fixing of ,Suction ,Delivery & Header Pipe

Providing & fixing of control Valve /Butterfly Valve in mainline for bypass and flow diversion of approved quality 3". Make: LP, Carter, Zoloto

Providing & fixing of Non Return Valve to prevent back flow 3". Make: LP, Carter, Zoloto

Providing and fixing of Pressure Release Valve 2". Make: Bermad or Equivalent

Providing and fixing of water meter 3". Make: Bermad or Equivalent

Supply and fixing of Direct burial 14 AWG x 2C cable for TWO way communication between Controler and decoders. Make: Paige, Hunter, Macrotherm or equivalent

PVC conduit Pipe complete 32 mm, Make: Astral, Finolex, Supreme, Prince

Supply and fixing of ICC2 MEDIUM CONTROLLERS with EZDS: EZ DECODER SYSTEM FOR HCC wall mount, internal transformer control system , cycle +soak, Raindelay, SOLARSYNC Mini weather station, controlling upto 1 master valve with diagnostic feature in wire shorttest ,voltage test at stations, standard accessories complete. Make: Hunter or Equivalent

Supply and fixing of EZ1 1 Station Decoder. Make: Hunter or Equivalent

Supply and fixing of MASTER VALVE 2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10 bar with 24AC solenoid, with provision to attach Pressure Regulator. Make: Hunter or equivalent

Supply and fixing of 2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10 bar with 24AC solenoid, with provision to attach Pressure Regulator. Make: Hunter or equivalent

Providing & fixing of 12" Rectangular Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. Make: Ecorain or equivalent

Supply and fixing of direct bury -on wire connector with strain relief , with waterproof silicon sealant. Make: Hunter or equivalent

Supply and fixing of ACCU-SYNC-ADJ ACCU-SYNC PRESSURE REGULATOR, ADJUSTABLE PRESSURE MODEL 1.4–7 BAR (20–100 PSI), WORKS WITH ANY HUNTER VALVE. Make: Hunter or equivalent

Supply and fixing of Flow Sensors used to monitor line flow at real time in an Irrigation system with FCT 308. Make: Hunter or equivalent

Supply and fixing of MINI-WEATHER STATION. Make: Hunter or equivalent

Supply and fixing of copper grounding rod, clamps, charcoal and all requisite accessories complete

Supply and fixing of Pump relay 24 AC PLA relay. Make: Selec or equivalent

Supply and fixing of voltage stabiliser. Make: Eaton, APC, Emerson or equivalent

All irrigation system work installation, commissioning, supervision charges for College Campus

All irrigation system work installation, commissioning, supervision charges for Sports Ground

Providing, laying, testing & commissioning of 80 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Providing, laying, testing & commissioning of 100 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

Providing, laying, testing & commissioning of 150 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required

Providing and fixing 80 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Providing and fixing 100 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Supplying and fixing first-aid 30 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying and fixing first-aid 40 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Providing and fixing of weather proof hose cabinet fabricated from 16g MS sheet with full glass door and locking arrangement, suitable to accommodate 2 nos. 15m long 63 mm dia hose, and one no. branch pipe with nozzle. The cabinet shall be painted with two coats of 'Fire red' enamel paint over two coats of Zinc Cromate primer including "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx. 0.75m x 0.6m x 0.25m).

Supplying and fixing Gun Metal 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required as per approved make.

Supplying and fixing of 2-way fire brigade connection to static tank (Draw out connection) of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Providing & fixing Fire pump ON/OFF switch including all related fitting accessories as per engineer in charge.

ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683

Supply and installation of fire man's axe.

EXTERNAL PIPING & ACCESSORIESProviding laying, testing & commissioning of 'B' class heavy duty G.I Pipe conforming to IS 1239 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. Pipe Size: 80mm diameter

Providing laying, testing & commissioning of 'C' class heavy duty G.I Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. Pipe Size: 100mm diameter

Providing laying, testing & commissioning of 'C' class heavy duty G.I Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. Pipe Size: 150mm diameter

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way-100 mm dia M.S. Pipe

Providing and fixing 150 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation

Providing, installation, testing and commissioning of 100 mm diameter non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of 150 mm diameter non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Providing, installation, testing and commissioning of 150 mm diameter stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

Providing, installation, testing and commissioning of 100 mm diameter Neoprene based flexible connectors shall be of the single- or double-sphere molded joint configuration and shall meet specifications of the Rubber Expansion Joint Division.

Providing, installation, testing and commissioning of 150 mm diameter Neoprene based flexible pump connectors shall be of the single- or double-sphere molded joint configuration and shall meet specifications of the Rubber Expansion Joint Division. Maximum Pressure: 225 PSIG based on 170° F operating temperature.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of 100 mm sizes as required :(cabling will be part of Fire Alarm System)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing pipe protection for underground pipes from corrosion painting pipe with approved primer and covered with anticorrosive tape (4mm thick) of approved make as per specifications pipe size as follow: 80 mm diameter

Providing pipe protection for underground pipes from corrosion painting pipe with approved primer and covered with anticorrosive tape (4mm thick) of approved make as per specifications pipe size as follow: 100 mm diameter

Providing pipe protection for underground pipes from corrosion painting pipe with approved primer and covered with anticorrosive tape (4mm thick) of approved make as per specifications pipe size as follow: 150 mm diameter

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. Fire Pump as per requirement having a capacity of 1620 LPM at 70 meter head.

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.Fire Pump as per requirement having a capacity of 1620 LPM at 70 meter head.

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.Fire Pump as per requirement having a capacity of 180 LPM at 70 meter head.

Cutting out core holes in RCC structure for pipe crossing for plumbing/drainage/ fire fighting /HVAC piping /any other purpose as per site requirement (A)100 mm dia.

Cutting out core holes in RCC structure for pipe crossing for plumbing/drainage/ fire fighting /HVAC piping /any other purpose as per site requirement (A)150 mm dia.

P.R. Patel and Co.

KRISHNA BUILDER

R N Dobariya