Balance Work Estimate For Proposed Multipurpose Hall Cum Club Building, at Maitri community Center, Sec-17b, Gurugram, Haryana

Amount

Providing and fixing normal keys, 5 Pins Euro Profile cylinder with key to knob operation standard length 60mm in SS/ gold finish with 3 keys of approved quality with necessary screws and Master key .

Providing and fixing normal keys, Euro Profile half cylinder 45mm length of gold finish with 5 normal keys of approved quality with necessary screws.

Providing and fixing mortice sash lock with 45mm backset, 23mm square forend and 8mm follower with 72mm centers and prepared for euro profile cylinder including strike plate in SSS with latch bolt projection of 15mm and double bolt throw dead bolt of 18mm projection of approved quality with necessary screws.

Providing and fixing floor stop half dome with 50mm dia with fixing accessories, in satin stainless steel of approved quality

Providing and fixing lever handle suit to 8mm follower with rosettes and escutcheon of approved quality with all necessary fixing accessories

Providing and fixing Tower Bolt( 6`) -SS304 of approved make with all fixing accessories

Constructing brick masonary surface drain with bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) including earth excavation , 10cm thick bed concrete 1:5:10 (1 cement : 5 coarse and : 10 graded stone aggregate 40 mm nominal size) and 25 mm thick cement concrete 1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 12.5 mm nominal size) for filling haunches including 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side and 12mm thick external plaster with cement mortar 1:6 (1 cement : 6 coarse sand) including connection to existing drain and disposal of surplus earth - a) 30 cm drain 50cm average depth

Providing , fabricating and fixing M.S. iron grating as under. - I) Fabricating surface drain grating (in length of 600 x 300mm) with 20 mm x 5mm thick M.S. flat welded to 25 mm x 25mm x 5 mm thick angle frame at 10mm interval, 2 Nos. hold fast on both side of grating angle frame shall be welded with angle frame setting with cement mortar 1:3 (1 Cement : 3 Coarge send) true to level as required for basement drain.

Extra for additional depth for brick masonary surface drain. 30 cm drain 50cm average depth

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping including R410a refrigerant of suitable size as required and duly insulated with19mm/13mm thick closed cell elastomeric insulation with class `O` fire retardant properties in tubing form. External Refrigerant piping shall be laid on threaded rod and GI slotted channel supports. Entire refrigerant piping work shall be carried out in accordance with the specifications.PVC sleeves of requisite size shall be provided at wall crossing. Piping shall be of following sizes : Pipe Size Thickness of CSE (O.D.) (O.D.) Insulation 6.4 mm 13 mm

Applying painting with Interior grade Royal ultima Paint with water based Emulsion with 2 coats or more in desire shade and color, to provide smooth finish as desired. Finish as per satisfaction of engineer in charge.

Providing and fixing Glass Door Accessories of all type Including (make : Dorma/ haffele/dorset) 1. handles pair - H type. 25.4mm dia 400mm length 2. center patch lock with cylinder 3. Door Stopper (SS 304) half round, floor mounted 4. Glass Combo Set With Top and Bottom Patch Fittings (Without Lock Patch) Upto 100 Kg 5. Top pivot 6. Top Patch

Supply,Installation, Testing and Commissioning of air cooled variable refrigerant flow modular type condensing units with anti-corrosion treatment, each comprising of multiple scroll compressors all inverter driven, full charge of refrigerant gas (R-410a), lubricating oil and all accessories as per the specifications. The condensing units shall be suitable to work on heating/ cooling mode. The outdoor unit shall be low noise type. The minimum Energy Efficiency Ratio shall be as per ASHRAE STANDARDS 90.1 - 2001 table 6.2.1B. The condensing units shall be suitable for operation on 415 ±10% volts, 50Hz, 3 phase AC power supply and the condensing units shall be of following capacities: a 22 HP nominal capacity high COP outdoor unit

Supply,Installation, Testing and Commissioning of air cooled variable refrigerant flow modular type condensing units with anti-corrosion treatment, each comprising of multiple scroll compressors all inverter driven, full charge of refrigerant gas (R-410a), lubricating oil and all accessories as per the specifications. The condensing units shall be suitable to work on heating/ cooling mode. The outdoor unit shall be low noise type. The minimum Energy Efficiency Ratio shall be as per ASHRAE STANDARDS 90.1 - 2001 table 6.2.1B. The condensing units shall be suitable for operation on 415 ±10% volts, 50Hz, 3 phase AC power supply and the condensing units shall be of following capacities: b 16 HP nominal capacity high COP outdoor unit

4 WAY/ROUND CASSETTE TYPE INDOOR UNITS Supply, Installation, Testing and Commissioning of Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections, necessary mounting accessories etc. with cordless remote as per specifications. 4.8 TR

HI WALL TYPE INDOOR UNITS Supply, Installation, Testing and Commissioning of Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, insulation, pipe connections, necessary mounting accessories etc. with cordless remote as per specifications. 2.5 HP

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 41.3 mm Thickness of CSE 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 34.9 mm Thickness of CSE 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 31.8 mm Thickness of CSE 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 28.6 mm Thickness of CSE 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 25.4 mm Thickness of CSE 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 22.2 mm Thickness of CSE 19 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 19.1 mm Thickness of CSE 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 15.9 mm Thickness of CSE 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 12.7 mm Thickness of CSE 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 9.5 mm Thickness of CSE 13 mm

Supply, Installation, Testing and Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Pipe Size 6.35 mm Thickness of CSE 13 mm

Supply, Installation , Testing and Commissioning of following imported fittings to be provided in refrigerant pipe line. Material of construction for fittings shall be similar to refrigerant piping. Y- joints for refrigerant piping

Supply, Installation , Testing and Commissioning of following imported fittings to be provided in refrigerant pipe line. Material of construction for fittings shall be similar to refrigerant piping. Decorative Panel for Cassette Type Indoor

`Supply, Fabrication and Installation of MS frame using channels/angle iron sections as required for mounting of VRF outdoor units.The frame work shall be made out of hot dip galvanised structural steel The general arrangement drawing for frame work shall be got approved from the Architects/Structural Engineers prior to commencement of fabrication.

Providing and fixing of Rigid PVC Piping complete with fittings, supports as per specifications as required at site and complete in all respect. 25mm dia

Providing and fixing of Rigid PVC Piping complete with fittings, supports as per specifications as required at site and complete in all respect. 32mm dia

Providing and fixing control cum transmission wiring in medium duty PVC Conduit between indoor and outdoor units. 2C x 1.5 Sqmm

Providing and fixing of Perforated 1.6 mm thick Type G.I. cable tray with top cover for Power Cabling and Refrigerant Copper Piping in outdoor applications as per specifications. 300mm

Providing and fixing of Perforated 1.6 mm thick Type G.I. cable tray with top cover for Power Cabling and Refrigerant Copper Piping in outdoor applications as per specifications. 200 mm

Bidder Name

Amount

Anant Ram (GSTN-06ANPPA0388K1ZT) BID ID -990374

Surender Singh(GSTN-NA)--990412

Surender Singh

Surender Singh