Chinnamanur Block - Package No. 7-CMNR - RCSIDS 2019-2020

Amount

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification-FOR DEEP FOUNDATION

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete -complying with standard specification-FOR EARTH BEAM,STEP

Supplying and filling in foundation and basement with filling excavated earth in larges of not more than 15 cm thick well rammed waterd and compacted including & conveyance and all labour charges etc.,

Supplying and filling in basement with filling River sand in layer of not more than 15 cm thick well rammed etc., complete.

Cement concrete 1:4:8 mix using 40mm iss HBG metal for foundation & flooring including labour charges etc., complete

Brickwork in CM 1:5 mix using country bricks ground maded of size 23 x 11 x 7 cm including cost and conveyance of all materials etc., complete.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.FOR EARTH BEAM,PLINTH BEAM,COLUMN

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.FOR LINTEL BELT,LINTEL BEAM, TEE BEAM ,SLAB

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer.

D3 Door size 1.20m x 2.10 m

Fabricating Supply and fixing and position of MS Windows with two leave. The window outer frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle intermediate stiffner will be 25x25x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer.

W1 Window size 1.20m x 1.30m (out of two windows are for emergency exit)

Labour charges for the Fixing in position of the Steel door with frame as per standard specification

Labour charges for the Fixing in position of the Steel Window with frame as per standard specification

Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete complying with standard specifications.

Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Finishing the floor with ceramic tiles in c.m .1;3 mix,including cost and conveyance of all materials etc., complete.

Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc.

Finishing top roof mix one course machine pressed tiles of size 20 cm x 20 cm x 2 cm approved qty with,CM.1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coat including the cost all materials etc.,complete, in all floors.

Black board Painting two coats including cost and Conveyence of all charges etc.,complete

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia -4ksc

supply of 110 mm pvc elbow

Supply and Fixing of Cudappah slab including cost and all labour chrges etc.38mm/40mm thick

Supplying and fixing following electrical arrangement

a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable color for open PVC light point and fan point (for electronic regulator)

d)Supply and fixing of single Type street light Flu. fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Street light

e)Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains

Supply and run of 2 of 1.50sqmm ( 56/0.30 ) PVC insulated Single wire multi strand fire retardent flexible copper cable with ISI mark conforming to IS :- 694 /1990 for Single Phase

Supply and fixing 6 way SP DB 16A DPIC switch of 500 V ( side lendle ) with F & N on suitable TW board with PWD earthingSupply and fixing 6 way SP DB 16A DPIC switch of 500 V ( side lendle ) with F & N on suitable TW board with PWD earthing

h)Supplying and fixing of 1200mm(40")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp

i)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc unsheated Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with 150x100x113Tw switch box for 5A3 pin non iter locking with painting of suitable colour with continuous earth connection 14SWG TC wire for open PVC PLUG POINT

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

G MURALIDARAN