Construction of Multispecial Hospital Building at Sawantwadi Tal Sawantwadi Dist.Sindhudurg.

Amount

Item No. 1 :- Removing grass, gazer grass and disposing off out of building premises including making clean the ground by showel and phavaras, etc. complete.

Item No. 2 :- Excavation for foundation in earth, soils of all types, sand gravel and soft murum including removing the excavated materials upto a distance of 50 meters beyond the building area including all leads and lifts upto 1.5 metre, stacking and spreading as directed including dewatering, unless provided elsewhere preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete.

Item No. 3 :- Excavation for foundation in hard murum including removing the excavated materials upto a distance of 50 meters beyond the building area, including all leads and lifts stacking and spreading as directed including dewatering, unless provided elsewhere preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 metre).

Item No. 4 :- Excavation for foundation in hard murum including removing the excavated materials upto a distance of 50 meters beyond the building area, including all leads and lifts stacking and spreading as directed including dewatering, unless provided elsewhere preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 metre to 3.00 metre).

Item No. 5 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Item No. 6 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Item No. 7 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30-60 cm. deep at 15 cm. c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Item No. 8 :- Providing dry trap rubble stone soling 15 centimeter to 20 centimeter thick including hand packing and compacting etc. complete.

Item No. 9 :- Providing and laying Cast in situ / Ready Mix cement concrete M-15 of trap metal for bed blocks, foundation blocks and such other items including bailling out water, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, etc. complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, etc. (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Item No. 10 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Item No. 11 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 12 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 13 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 14 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 15 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 16 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 17 :- Filling in plinth and floors with approved excavated materials in 15 to 20 centimeter layers including watering and compaction as directed by Engineer-in-charge with all leads and lifts etc. complete.

Item No. 18 :- Filling in plinth and floors with contractor's murum in 15 to 20 centimeter layers including watering and compaction as directed by Engineer-in-charge with all leads and lifts etc. complete.

Item No. 19 :- Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 20 :- Providing second class fly ash Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 millimetre diameter / 2 hoop iron strips 25 millimetre X 1.6 millimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 21 :- Providing and fixing in position HCRM / CRS ( Corrosion Resistant Steel ) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 22 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Item No. 23 :- Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Item No. 24 :- Providing water proof bedding for flooring of Bath and W.C. 25 millimeter thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs. 500/- including ponding test etc. complete. ( Ground Floor )

Item No. 25 :- Providing waterproof plaster in W.C. and bath 20 millimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing and filling joints of nahani trap and any outlet properly etc. complete. ( Ground Floor )

Item No. 26 :- Providing internal cement plaster 12 millimeter thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 27 :- Providing internal cement plaster 20 milimeter thick in a two coat in cement mortar 1:4 without neeru finish to concrete, brick surface in all positions including scaffolding and curing with all leads and lifts etc. complete. A) Ground Floor ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 28 :- Providing neeru finish to plastered surface in all positions including scaffolding and curing with all leads and lifts etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 29 :- Providing internal cement plaster 6 milimeter thick in single coat in cement mortar 1:3 without neeru finish to concrete surface in all position including scaffolding and curing etc. with all leads and lifts etc. complete. A) Ground Floor

Item No. 30 :- Providing and applying plaster with plaster of paris in 6 millimeter thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 31 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 32 :- Providing patti/ band 100 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in cement mortar 1:3 line and level including neat finishing scaffolding curing etc. complete.

Item No. 33 : Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 to 605 millimetre x 590 to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 34 :- Providing and laying vitrified mirror / glossy finish tiles having size 590 to 605 millimetre x 590 to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for skirting in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curign and cleaning etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 35 : Providing and laying vitrified matt finish tiles of having size 590 to 605 millimetre x 590 to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 36 :- Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25 millimetre to 30 millimetre thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 37 :- Providing and laying in position flooring of telephone black / Amba White / Cadbury brown / RBI red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats, striking joints, pointing in cement mortar 1:3, curing and cleaning etc. complete. ( For Ground Floor )

Item No. 38 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cadbury brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 39 :- Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite / Amba White / Cadbury brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete. Both side polish. ( For Ground Floor )

Item No. 40 :- Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre confirming to I.S.15622/2006 (group D II-A) and 7 to 8 millimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 41 :- Providing and laying ceramic tiles of having size 30 centimeter x 30 centimeter and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 42 :- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 43 :- Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimetre to 30 millimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 44 :- Providing and fixing green marble of 18 to 20 millimetre thick for door frame/ dado/ window boxing etc. on cement mortar 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 45 :- Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 millimetre thickness of having a strength of 400 kilogram / Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etc. complete. (using 100% crushed sand).

Item No. 46 :- Providing and preparing kitchen otta up to 75 centimetre width, made up from 30 millimetre thick and 75 centimetre high vertical support for kadppa at 1 metre c/c of 25 millimetre thick both side polished kadappa middle shelf and bottom of 20 millimetre thick one side polished kadappa with facia patti of 20 x 50 millimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 47 :- Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 millimetre x 450 millimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 millimetre thick supports with kadappah top 35 to 40 millimetre thick and polished granite 16 to 20 millimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre) A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 48 :- Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre, confirming to corresponding I. S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning, curing etc. complete.

Item No. 49 :- Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Item No. 50 :- Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 millimetre thick panels with openable fan light as per detailed drawings. Excluding the door frame 60 millimetre x 100 millimetre stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame). A) Ground Floor

Item No. 51 :- Providing and fixing frame with / without ventilator of size as specified with Ghana teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre x 40 millimetre x 5 millimetre with oil painting, etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 52 :- Providing and fixing solid core flush door shutter in single leaf 32 millimeter thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimeter thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. ( For Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 53 :- Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 54 :- Providing and Fixing 32 millimetre thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 millimetre thick having puff insulation of 35 to 40 Kilogram / Cubic Metre density and 10 millimetre diametre for steel bars 2 numbers, wooden block to receive fixtures, having Mild Steel hinges 100 millimetre length, Mild Steel handles 150 millimetre length and 10 millimetre diametre sliding door bolt etc. complete. A) Ground Floor

B) For 1st Floor

Item No. 55 :- Providing and fixing in position Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75 millimetre, 3.18 millimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 millimetre x 44.5 millimetre x 3.00 millimetre thick top rails 47.62 x 44.45 millimetre x 3.00 millimetre thick , vertical style 47.62 x 44.45 millimetre, 3.00 millimetre thick and for shutter plain glass panes 5 millimetre thick for top panels and 12 millimetre thick both side laminated phenol bonded particle board panels for bottom panels etc., I.S.I. mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250 millimetre length aluminium tower bolts, 150 millimetre diameter pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etc. complete. ( Ground Floor )

Item No. 56 :- Providing and fixing 34 millimeter thick moulded door shutter consisting of solid core single leaf flush door of 30 millimeter thickness lipped with 15 millimeter ( 5 mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded poly vinyl chloride sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam poly vinyl chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the poly vinyl chloride lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 57 :- Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 millimetre at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 millimetre at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 millimetre at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 millimetre at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick High performance Single Glaze Unit (SGU) - Glass , and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 58 :- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 59 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 millimetre x 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etc. complete. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 60 :- Providing and fixing mild steel grill work for windows, ventilators etc. 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 61 :- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 62 :-Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 63 :- Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete. ( Heat Reflective Paint ) A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 64 :- Providing and fixing false ceiling of 12 millimetre thick as per drawings including powder coated G. I. wall angle of 20 millimetre x 20 millimetre size, G. I. grid runners of size 20 millimetre x 38 millimetre at 600 millimetre center to center both ways and suspended using G. I. 3 millimetre wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. A) Second Floor

B) For 3rd Floor

Item No. 65 :- Providing expansion joints in Reinforced Cement Concrete framed structure (interior column) with plain premoulded filler with confirming to IS : 1838-1961, 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate finishing as directed etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 66 :- Providing expansion joints in Reinforced Cement Concrete framed structure (exterior column) with plain premoulded filler 25 millimeter thick with 75 millimetre wide and 1 millimetre thick stainless steel plate finishing as directed etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 67 :- Providing expansion joints in Reinforced Cement Concrete framed structure (at floor level) with premoulded filler 25 millimeter thick with 75 millimetre wide and 1 millimetre thick stainless steel plate finishing as directed etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 68 :- Providing expansion joints in Reinforced Cement Concrete framed structure (at terrace level) with premoulded filler 25 millimeter thick with 40 millimetre wide and 1 millimeter thick stainless steel plate as required, bituminous poured filler and finishing as directed etc. complete.

Item No. 69 :- Providing and fixing first class white glazed earthenware orissa type water closet pan 580 millimetre diametre including "P" or "S" trap, Cast Iron soil and vent pipe upto the out side face of wall, 1:5:10 cement concrete bedding 15 millimetre thick, 10 litre Poly Vinyl Chloride flushing cistern with all necessary pipe connection etc. complete. (BRAND - HINDWARE / JOHNSON / PARRYWARE ) A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 70 :- Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 71 :- Providing and fixing 15 centimeter x 10 centimeter salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Item No. 72 :- Providing and fixing 15 centimetre rigid Poly Vinyl Chloride Nahani trap including Poly Vinyl Chloride grating, bend, connecting piece of Unplasticised Poly Vinyl Chloride pipe up to the outside face of wall, making the good damaged surface and testing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 73 :- Providing and constructing Brick Masonry Inspection Chamber 60 centimeter x 45 centimeter x 90 centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and frame fixed in cement concrete cover medium duty 140 kilogram with frame etc. complete.

Item No. 74 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimeter x 45 centimeter x 90 centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete cover medium duty 140 kilogram with frame etc. complete.

Item No. 75 :- Providing and constructing Brick Masonry inspection trap Chamber 90 centimetre x 45 centimetre including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels / half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and outside, fixed in cement concrete with reinforced cement concrete cover medium duty 140 kilogram etc. complete.

Item No. 76 :- Providing soak pit of size 120 centimeter x 120 centimeter x 120 centimeter including excavating and filling with brick-bats etc. complete.

Item No. 77 :- Providing and fixing High Density Polyethyle container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.

Item No. 78 :-Providing and fixing white glazed with bottle trap earthenware Wash Hand Basin of 63 centimeter x 45 centimeter size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. (BRAND - HINDWARE / JOHNSON / PARRYWARE / VIENA/ AMERICAN STANDARD) A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 79 :- Providing and fixing white glazed earthenware full stall type Urinal with Poly Vinyl Chloride flushing cistern of 5 liters capacity with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 millimeter diameter Poly Vinyl Chloride flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 80 :- Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 milimetre diametre P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 81 :- Providing and fixing Chromium Plated wall mixer with provision for overhead shower with 115 millimetre long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 82 :- Providing and fixing 450 millimeter x 550 millimeter size superior type Belgium mirror with 16 millimeter diameter nickel plated towel rod etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 83 :- Providing and fixing Chromium Plated 2 Way BIB cock of approved make continental including necessary sockets/ union nut etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 84 :- Providing and fixing Chromium Plated Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 85 :- Providing and fixing Chromium Plated pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete.

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 86 :- Providing, laying and fixing Poly Vinyl Chloride pipe of 75 millimetre diametre with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Item No. 87 :- Providing, laying and fixing Poly Vinyl Chloride pipe of 110 millimetre diametre with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Item No. 88 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diametre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Ground Floor )

Item No. 89 :- Providing and fixing on walls/ ceiling/ floor 20 millimetre diametre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Ground Floor )

Item No. 90 :- Providing and fixing on walls/ ceiling/ floor 25 millimetre diametre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Ground Floor )

Item No. 91 :- Providing and fixing on walls/ ceiling/ floor 40 millimetre diametre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Ground Floor )

Item No. 92 :- Providing and laying in trenches 25 diametre Chlorinated Poly Vinyl Chloride pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Ground Floor )

Item No. 93 :- Providing and laying in trenches 40 diametre Chlorinated Poly Vinyl Chloride pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. ( Ground Floor )

Item No. 94 :- Providing and fixing chromium plated towel rod 16 millimeter diameter and 75 centimeter in length including all accessories complete. ( Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 95 :- Providing and fixing Chromium Plated sink cock with raised J" shaped swinging casted spout of approved make including necessary sockets/ union nut etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 96 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 97 :- Providing and fixing 75 millimeter diameter stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. ( BRAND FINOLEX / SUPERME / PRINCE) A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 98 :- Providing and fixing 100 millimeter diameter stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. ( BRAND FINOLEX / SUPERME / PRINCE) A) Ground Floor )

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 99 :- Providing and fixing corrugated galvanised iron sheets of 0.63 millimetre thick ( 24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 kilogram / square metre).

Item No. 100 :- Providing and fixing 45 centimeter wide steel ladder of 40 x 6 milimeter mild steel flat stringers and steps of 18 milimeter diameter mild steel bar including fixing it in M-15 cement concrete block 60 x 30 x 30 centimeter and painting the ladder with antirust primer and two coats of anti corossive paint including all leads and lifts etc. complete.

Item No. 101 :- For Elevation, Structural cladding with 5 milimeter thick reflective glass of approved quality as shown in detailed drawings and specifications.

Item No. 102 :- Providing and fixing 40 milimeter diameter and 1.5 milimeter thick Stainless steel hand railing in Stainless steel 304 grade including fabricating, fixtures, errecting necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 103 :- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 millimetre diametre and vertical pipe of 38 millimetre diametre at 0.60 metre c/c or as required and horizontal pipes of 25 millimetre diametre in three rows, all pipes of 2 millimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75millimetre diametre above newel post of 75 millimetre diametre etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 104 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimeter width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /Burnt Brick masonry and or tying by binding wire etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 105 :- Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the lefters/figures with approved colour and shade complete.

Item No. 106 :- Providing 25 millimetre to 30 millimetre thick partition of Both side polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 107 :- Providing and fixing shutter to wall cupboard made from 19 millimetre thick Teak particle board with approved coloured laminated face 1.5 millimetre thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). A) Ground Floor

B) For 1st Floor

C) For 2nd Floor

D) For 3rd Floor

Item No. 108 :- Providing and fixing corrugated Precoated sheets of 0.63 millimetre thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 kilogram / square metre).

Item No. 109 :- Providing and fixing in position Stainless Steel Plate 4 millimetre thick with lettering and numbering etc. ( Size 23 centimetre x 15 centimetre ).

Item No. 110 :- Providing and fixing lightening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25 millimetre diametre 1.2 millimetre thick with multiple points head 1.2 metre long ( Heavy Duty) welded or clamped to galvanised iron pipe pole B grade 50 millimetre diametre of requiired length with mild steel round bnase plate 25 centimetre diametre and 10 millimetre thick at bottom embeded in cement concrete 1:3:6 foundation of size 45 centimetre diametre x 45 centimetre Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 centimetre with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kilogram charcoal and salt with altemate layers of charcoal and salt and galvanised iron pipe 40 millimetre diametre 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling complete.

Item No. 111 :- Royalty charges for various construction bonafied materials are used for works and for which Royalty Charges paid to the contractor only after he pay if produced the original Revenue Department Challan.

Item No. 112 :- Add Royalty charges surcharge as per instruction etc. complete.

Item No. 113 :- Carrying out various test in Government P.W.D. Laboratory as per relevant standards and submitting test results to Engineer-in-charge or his representative and retesting if required, including taxes, overheads and other allied charges etc. complete.

i) Soling stone / rubble

Compressive Test, Water Absorption and Specific Gravity

ii) Cement

Fineness, Initial setting time, Final setting time, Compressive Strength, Soundness.

iii) Fine Aggregate (Sand)

Fineness modulus, Silt content

iv) Coarse Aggregate

Sieve analysis

Specific Gravity, Water Absorption, Crushing value & Impact value

v) Cement Concrete

Compressive strength of C. C. Cube

Concrete mix design

vi) For Supply of soft murum for plinth filling

Liquid Limit and Plastic Limit

vii) HOLLOW BLOCKS/ SOLID BLOCKS

Density Test . (Set of 3 Blocks ),Compressive Strength. (Set of 8 Blocks ),Water Absorption Test. ( Set of 3 Blocks ) - 200 x 200 x 400 millimetre

Density Test . (Set of 3 Blocks ),Compressive Strength. (Set of 8 Blocks ),Water Absorption Test. ( Set of 3 Blocks ) - 100 x 200 x 400 millimetre

viii) Cement Mortar

Compressive strength

ix) HCRM Bar Tensile strength, Elongation, wt per metre, Bend and rebend test

Upto 16 mm diameter

Above 16 mm diameter

x) Ceramic / Vitrified Tiles

Water Absorption, Moduls of Rapture (Set of 6 Tiles)

xi) Concrete paving / Grass Paver Blocks

Comp. Strength, water Absorption (set of 8 blocks), Flexural test (set of 8 blocks)

xii) Wood

Moisture content/Density

xiii) Alluminimum Section

Thickness / Weight per running metre

Powder coating

Neharkar Construction

Shubham Civil Projects Pvt. Ltd.