Spl repair to bldg No P-12 and constn of 03 x toilet block alongwith bathroom and wash basin for Post No 19, 20 and 21 of Bn -VI at Tibri Mil Stn under GE Gurdaspur.

Amount

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of rubbish off the premises where directed complete all as specified and directed.

M&L for rendering 12mm thick plaster in cement mortar 1:6 on brick or concrete surfaces of walls, finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5mm thick plaster on ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete surfaces of walls, finished surface even and fair with WPC as per manufacturer's instructions complete all as specified and directed. Note : WPC shall be measured and paid separately

Supply only integral water proofing compound

M&L preparation of new plaster surface and applying two coats of Oil bound distemper of wall over a coat of primer on wall complete all as specified and directed by EIC.

M&L preparation of new plaster surface and applying three coat of white wash on wall complete all as specified and directed.

M&L preparation of new plaster surface and applying three coat of white wash on ceiling complete all as specified and directed.

M&L preparation of new plaster surface and applying two coats of cement base paint on wall surface complete all as specified and directed.

M & L for preparation of old decorated wall surfaces and applying two coat of white wash complete all as specified.

M&L for Preparation of old plastered surface of walls and applying one coats of oil bound distemper on wall complete all as specified and directed by EIC.

M& L for two coat of white wash on old treated ceiling surfaces complete all as specified.

M&L for Preparation of old plastered surface of walls rubbing down, making good holes, cracks, etc and stopping etc on existing distempered surfaces and applying one coats of cement base paint on wall ht upto 6m complete all as specified and directed by EIC.

Material and Labour for repairing to RCC projections, chajjas, roofs, facia, ceiling etc. by scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement of damaged loose RCC surfaces and applying neat cement slurry @ 3kg/sqm and filling the surfaces with cement sand mortar 1:3 or cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) using coarse sand in layers as required and reinforced with 8mm dia. TMT bars in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces at height upto 12m complete all as specified. Note:- Cost of formwork shall be deemed to be included in unit rate quoted by the Contractor.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spcified and directed.

M& L Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spcified and directed.

M&L for glazed ceramic coloured tiles in vertical surface of size 350x250x7mm/ 450x350x7mmmm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles complete all as speciifed and directed by EIC.

Demolition of stone slabs and tiles of laid, beded and pointed of any mortar in any description or thickness in floors, aprons etc. complete all as specifed an directed.

S&F Machine cut kota stone slab flooring 20-22mm thick in riser of steps, floors etc. over cement screed base 20 mm thick in 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (with bees wax polish) complete all as specified and directed by Engineer-in-Charge.

M&L for grinding of existing machine cut kota stone slab flooring including rubbing and polishing (with bees wax polish) complete all as specified and directed by Engineer-in-Charge.

M & L for green marble work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars window cills , cooking platforms , stair case and including 15 mm thick screed bed in CM 1:4 incl pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Taking down steel windows/ ventiators any size, any desctiption complete all as specifed an directed.

S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, painting shall be measured and paid for separately

S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, painting shall be measured and paid for separately

Taking down shutters of any description exc 1.00 sqm & n exc 2 sqm each and refixing in the same opening after easing and adjusting.

M&L for preparation of old painted steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint ht upto 4m complete all as specified and directed.

M&L for preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm each complete all as specifiwd and directed.

S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putting in squares nexc 0.50 Sqm each including hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed.

Supply and fix 3mm thick sheet glass frosted on one side and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

S&F anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing average not less than 1.00kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including taking down old existing shutters complete all as specified.

S&F anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including taking down old existing shutters complete all as specified.

S&F anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, with one or more rebates including joining cleat for fixing etc. including taking down old existing frame complete all as specified

S&F 4.8 mm thick black sheet glass ordinary quality in square or rectangular in size exc .5 sqm each in aluminium door or window shutter complete all as specified and directed

S&F 4.8 mm thick sheet glass ordinary quality in square or rectangular in size n.exc .5 sqm each in aluminium door or window shutter including hacking out of old broken glass panes complete all as specified and directed

S&F Mortice lock, aluminium vertical type size 65mm 2 levers complete all as specidfed and directed.

S&F in repairs S&F aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 2.00 Sqm each complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats) complete all as specified and directed.

Taking down chowkats with shutter exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutter for the chowkats) complete all as specified and directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and both faces covered with decorative face veneer with lipping/frame to match as decided by GE complete all as specified and directed.

S&F 35mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing, complete all as specified and directed.

Supply and fix factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail, bottom rail; panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°) and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick wood grain printed PVC sheets and edges will be painted to match with printed sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hings, lock strike, plate etc complete of size 105x60mm all as spd including two coats of painting over a coat of primer and filling PCC 1:2:4 (type-B0) in the frames complete all as specified and directed.

All as per Srl item No 48 above but one or more rebate and size 125x60 mm complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including beads all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including beads all as specified and directed.

M&L for preparation of new painted wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed.

M&L for preparation of new painted on steel surface exc 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S & F in repair 25 mm thick plywood , grade BWR, laminated on both side with decorative choice lamination, fire resistant, moisture resistant type fixed with screws to timber/steel frame work Including 6mm thick lipping fixed with nails on all sides complete all as specified and directed.

S&F aluminium alloy handle fabricated type anodized of size 100 mm long complete all as specified and directed.

S&F 75mm size hasp and staple safety type aluminium anodised hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F aluminium anodized barel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed.

S&F aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F butt hinges of size 100mm, medium weight, cold rolled mild steel fixed with metal surface through bolts, screws or welding complete all as specified and directed.

S&F 75mm size medium weight mild steel butt hinge fixed with metal surface through bolt or weld with screw complete all as specified and directed.

S&F mild steel work Fe 410-W(Gde-E- 250) quality-A Fe in framed work as in door frame, chowkats, shutter or gates of angle iron or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or orther covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening complete all as specified and directed

S&F 300mm, mild steel ordinary rat tail rod pattern springs,including roller and roller plate joint through welding/bolt in metal/wooden frame o be carried out or necessary alternative arrangements to be done complete all as specified and directed. .

S&F cutrain rod 20mm dia of Mild steel with PVC Coated with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. .

S&F rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres(cylindrical vertical with closed top) hoisted and fixed in position and ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule 20mm bore including dismantling of existing water tank complete all as specified.

S&F rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres(cylindrical vertical with closed top) hoisted and fixed in position and ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule 20mm borecomplete all as specified.

S&F in repair stop valves or angel valve 15mm bore cast copper alloy fancy type chromium plated alloy with crutch or butterfly handle screwed down for high pressure, screed on both ends, fixed for iron pipe etc complete all as specified and directed.

S&F stop valves or angel valve 15mm bore cast copper alloy chromium plated with crutch or butterfly handle screwed down for high pressure, screed on both ends, fixed for iron pipe etc complete all as specified and directed.

S&F stop valve 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed.

S&F in repair bib taps 15mm dia chromium plated cast copper alloy fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F bib taps 15mm dia chromium plated cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F in repair fancy type 15 mm bore pillar taps, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified & directed .

S&F 15 mm bore pillar taps, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold', screwed for iron pipe and fixed complete all as specified & directed .

Supply and fix 20mm bore dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Supply and fix 25mm bore dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Taking up and down GI pipe15mm bore including fittings, connection, complete all as specified and direced.

All as per Srl item No 77 above but 20mm bore of pipe

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

All as per Srl item No 79 above but 20mm bore of pipe

S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings, ISI marked complete all as specified.

S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings, ISI marked complete all as specified.

S&F GI tubing 25mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings, ISI marked complete all as specified.

M&L for sail glazed stoneware drain pipes grade A 150mm internal dia. of pipe laid in trenches and jointed as specified

Material and labour for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe all as specified and as directed.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including connections to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified and directed.

S&F vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest, PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc including connections complete and bedding in PCC 1:7:12 type F-2 complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair vitreous China wash basin,white flat back, size 550x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and coupling complete all as specified and directed.

S&F vitreous China wash basin,white flat back, size 550x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and brass CP coupling complete all as specified and directed.

S&F in repair vitreous china urinal bowl ,flat back size 465mmx 365mmx 265mm white, with grating & union for discharch pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; PVC flush pipe, PTMT urinal spreader, PVC waste pipe with all necessary fittings complete all as specified & directed.

S&F vitreous china urinal bowl ,flat back size 465x365x265mm white, with grating & union for discharch pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, urinal spreader of PTMT, waste pipe with all necessary fittings complete all as specified & directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia 800mm to 1000 mm long fixed to wash fitting of wash basin and sink all as specified and directed.

S&F in repair brass CP, shower rose 125 mm size with brass CP 195mm arm swivel joint fancy type complete all as specified and directed.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms), shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair brass chromium plated towel rail 60 cm long fixed to wall complete all as specified and directed.

Supply and fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as drected.

S&F in repair CP waste coupling 32/40mm dia for WHB complete (half and full threaded)

S&F soap dish, vitreous China white, approximate size 160x 160x 90mm fixed to plugs with CP brass screws

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level complete all as specified an directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand (all by weight) complete all as specified and as directed.

Dismantling of roof brick tiles fixed in cement mortar in single layer complete all as specified and directed.

Demolition mud phuska in roofs any thickness including plastering and leeping complete all as specified.

Roughing the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqm complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in roof kerbs or mud stops, coping, bed plartes, kerbs and the like including weathering, slightly rounded or chamfered angles, edges and throating complete all as specified and directed.

Material and labour for PCC (1:2:4) type B2 (using 40mm graded broken stone aggregates) as in surface channel, benching complete all as specified and as directed.

Cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate as in roof padding complete all as specified.

10 mm thick cement plaster in CM (1:3) on RCC roof slab including cleaning of existing surface using WPC as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) laid on primed surface with bitumen primer @ 0.40 kg /Sqm by forced application with butane torch over entire roof area with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in after cleaning surface complete all as specified and all as per manufacturer's instructions.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m complete all as specified a

M&L two coats of aluminium base paint over APP membrane complete all as specified and as per manufacturer's instructions.

M&L PVC (SWR) floor trap plain with grating including jointing with solvent cement 100mm dia of outlet complete all as specified and directed.

M&L PVC (SWR) floor trap plain including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.

S&F grating doom 100 mm dia with waste hole of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed.

Material and labour for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified & directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed.

S &F PVC (SWR) junction single, (single T), equal or unequal of 110mm bore complete all as specified and directed.

S &F PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe all as specified and directed.

Demolition of cement concrete (reinforcment) of any description upto 12m height all as specified & directed.

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Type B1 1:2:4 (20 mm graded aggregate set in cement motat 1:4, including formwork complete all as specified and directed.

Supply and fix for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L mild steel TMT bars 6 to 8mm dia. cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as specified.

M&L mild steel TMT bars 10mm dia and over cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as specified.

M&L mild steel TMT bars, 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and as directed.

M&L broken bricks hardcore of gauge n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M&L 75mm thick cement concrete type D-2 , 1:4:8 (using 40mm stone aggregate) as in sub base complete all as specified.

M&L 60mm thick PCC (M-35) factory made coloured interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand complete all as specified and directed by Engineer-in-Charge. Note :- Sand will be paid under relavent item.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavation over areas not exc.1.5 metres deep and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, sewage line, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:3:6) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in columns, pillars, piers,posts and struts complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in beams, cantilevers, bressummers, lintels complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material labour for RCC (design mix) M-25 (using 20mm graded broken stone aggregates) as in chajjas, fascias and the like complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any ) of foundation and plinth beam and similar works, vertical or batter etc for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to sides of pillars, posts, struts, columns and stanchions, square, rectungular or polygonal for fair finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves, bands, including supports, overhangs, etc. for fair finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick for fair finished flat surfaces of concrete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed by Engr-in-Charge.

M&L brick work with old size sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed by Engr-in-Charge.

M&L brick work with old size sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified & directed by Engr-in-Charge.

M&L brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified & directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregates) as in DPC to horizontal or vertical including necessary form work complete all as specified and as directed.

E/M PORTION Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches, ceiling roses, pendents, regulator, socket, light fittings etc complete at site and making goods disturbed surfaces of walls, floors etc.

Point wiring with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings and making good to the disturbed surfaces with continuous earth wire of PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to and including CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light point controlled by one, one way switch

Point wiring with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings and making good to the disturbed surfaces with continuous earth wire of PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light point/fan point/ bell point controlled by one, one way switch

All as per Srl item No 165 above but one 5 amp socket out let on same board.

All as per Srl item No 165 above wiring with 2.5 sqmm FRLS multistranded copper cable including earth wire 2.5 sqmm of FRLS multistranded copper cable for 15 Amps 3 pin socket outlet.

M&L for sub main wiring with two single core multi stranded PVC insulated, unsheathed copper conductor of grade 1100 Volt , FRLS cable of size 6 sqmm (red for phase and black for neutral) and including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 25 mm dia. & 6 sqmm FRLS multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth duly complete and taking down old unserviceable one. Note :- (a) Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing colour with MES Approval make of distemper is deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run.

S&F switch piano flush type single pole one way 5 amps.

S&F socket outlet 3 pin 5 amps flush type

S&F switch flush type 15 amps single pole type one way

S&F socket outlet 3 pin 15 amps flush type

S&F surface mounting universal batten husing made of powder coated CRCA sheet suitabe for and upto 1 x 18/20W LED tube rod fitting complete all as specified and directed.

S&F LED tube light 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting into tube light batten fitting complete all as as specified and directed. Note :- The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporating the items in work.

S&F lamp holder PVC body angle type including 9 watt LED bulb polycarbonate body complete all as specified and directed.

M&L ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body, surface complete all as specified and directed.

S&F sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with bus bar, SPN double door including taking down existing DB and MCBs complete all as specified and directed. Note :- All the connection of incoming and outgoing wire in MCB will be made with thimble with suitable size as directed.

S&F sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 4 way with bus bar, SPN double door complete all as specified and directed. Note :- All the connection of incoming and outgoing wire in MCB will be made with thimble with suitable size as directed.

S&F MCB single pole 6 amps to 32 amps , complete all as specified and directed.

S&F MCB single pole and neutral 40 Amps complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps complete all as specified and directed.

Cutting, screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed. (Each cut measured)

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor 6 Sqmm 2 core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Material and labour for replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 Way MS sheet including fixing in the wall, cutting chases grouting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings :- (a) MCCB 4 Pole 63 Amps 16 KA breaking capacity with thermal release - 01 No (In coming) (b) Bus bar made out of aluminium on insulated duly insulated wire adhesive tape RYB & black -4 Nos (c) MCB SPN 40 Amp - 4 Nos, MCB SP 40 Amp - 04 Nos (Out going) (d) Connection from MCCB to bus bar will be made with aluminium Strip of suitable size as directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge.

Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

talwinder singh and co

KAILASH CONSTRUCTION CO

M/s kulwant singh and sons

JOGRAJ CONSTRUCTION COMPANY

D.RAJ And CO.

buta singh and sons