Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L1 | Accepted-AOC Being lowest bidder. | |
| 2 | L2₹17.2 L+₹28,971 (1.71%)Rejected-Finance | L2 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 3 | L3₹17.9 L+₹97,637 (5.76%)Rejected-Finance | L3 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 4 | L4₹18.2 L+₹1.2 L (7.11%)Rejected-Finance | L4 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 5 | L5₹18.3 L+₹1.3 L (7.87%)Rejected-Finance | L5 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER |
Tender Value
₹19.7 L
EMD Value
₹39,460
Closing Date
24 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF JAMMU
GE AF JAMMU AIR FORCE STATION
CA NO GE/AFJ-04/2024-25 ADDITION AND ALTERATION OF RECEPTION ROOM KITCHEN AND BATHROOM IN BLDG NO P-301 GUEST HOUSE AND PROVN OF STEAM BATH IN SUIT NO 01 AND 02 OF OTF AT PCDA ARMY JAMMU UNDER GE AF JAMMU
2024_MES_651183_1
CA NO GE/AFJ-04/24-25
Open Tender
Civil Works
Item Rate
270 days
Jammu
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE AF Jammu
₹39,460
Yes
21 Feb 2025
26 Apr 2024
27 May 2024
26 Apr 2024
24 May 2024
10 May 2024
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Taking down steel tubing and connection 15 mm bore incl cleaning for refixing or removing from site complete all as specified and directed.
Taking down steel tubing and connection 20 mm bore incl cleaning for refixing or removing from site complete all as specified and directed.
Dismantling of water tank exceeding 500 Ltrs but not exceeding 1000 Ltrs complete all as specified and directed.
Taking down CI pipe/PVC Pipe (any size or pattern) incl fittings such as bends, shoes, head, swan neck etc incl cleaning for refixing or removal from site all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section, in any position in framed work all as specified and directed.
Dismantling of asbestos corrugated sheets(corrugated/semicorrugated) in roof covering including ridges all as specified and directed.
Dismantlin of wall and AC ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC , finished even and smooth (without using extra lime or cement) complete all as specified and directed. (Note:- WPC shall be measured & paid seperately).
Supply only water proofing compound complete all as specified and directed.
S & F 15 mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F 20 mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.
Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 15 mm complete all as specified and directed.
Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 20 mm complete all as specified and directed.
S&F for rotational moulded polyethylene water storage tanks two layers (cylindrical vertical with closed top) of capacity 1000 litres hoisted and fixed in position all as specified in SSR Part-I, including valves high pressure with PVC float and fly nut complete screwed for iron pipe or brass ferrule and fixed with 15 mm dia complete all as specified and directed.
M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
S&F light shade Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including rendering 10 mm thick on fair faces brick work or concrete surface in cement plaster 1:3 complete all as specified and directed.
Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge.
S & F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed.
S & F in repairs Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
S & F for, in repair, PVC connections 15 mm size with PTMT nuts of length 450mm long complete all and as directed by the Engr-in charge.
S&F Towel Rail 600mm long of PTMT any colour fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 190 gms)complete all as specified and directed.
S & F, Vitreous China bowl urinal half stall type white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F in repair Brass CP Central Hole wash basin mixer for Hot and cold for 15mm bore complete fixed to connection as specified and directed.
S and F in repair 15mm dia bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed all as specified and directed.
S and F in repair Angle valve cast copper alloy chromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed all as specified and directed.
Supply and fixing in repair Shower Rose Chromium plated with arm suitable for 15mm dia pipe complete all as specified.
S&F Liquid soap container of PTMT any colour fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 105 gms) complete all as specified.
S&F in repair 32mm dia waste coupling of PTMT,half or full threaded (minimum weight 45 gms), to WHB and kitchen sink complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed 75mm dia outlet complete all as specified and directed.
S&F in repair CP grating 75 mm dia as suitable to existing trap as per requirement all as specified and directed by Engg-in-Charge
S&F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints , laid in trenches or in floors complete all as specified &directed by Engineer-in-charge.
S&F PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls complete all as specified &directed by Eng-in-charge.
S&F PVC (SWR) bends110mm
S&F PVC (SWR) bends75mm
S&F PVC (SWR) vent cowl 110mm
S&F PVC (SWR) vent cowl 75mm
Supply and Fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W complete all as specified and as directed.
M & L MS Plates ( Plain or chequered) channels, Square cut or notched (ordinary and counter sunk) conforming to Fe-410-W, forming holes, without any attachment all as specified and directed
M & L for Mild steel bolts purpose made with hexagonal or square head one end screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long all as specified and directed.
M & L, for cement concrete in coping, type B-1 1:2:4 (using 20 mm mm graded stone aggregate)including necessary form work complete all as specified and as directed.
S&F 0.50 mm thick pre -painted galvalum aluminium zinc coating GI based corrugated steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified colour as approved by Engr -in -Charge.
S&F 12 mm thick ceiling board fixed with screw on and including galvanised iron with aluminium coating snap grid frame work ( size of grid 605 x 605 mm) with fasteners supports, plugs to walls/ceiling including two coats of oilbound distemper complete as per manufacture instruction and as directed by Engr-in-Charge.
S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification given in SSR Part-1 clause 8B.2.1 & drawing as on page 146 all as specifed and as directed by Engineer-in-Charge.
S/F solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing & all as specifed and as directed by Engineer-in-Charge..
S&F Butt hinges 100mm size, extruded brass,with mild steel hinge pin, bright polished, type B-11 complete all as specified.
Supply and fixing in repair aluminum anodized barrel tower bolt of extruded section 200 mm long complete all as specified (ISI Marked) complete all as specified.
Supply and fixing in repair aluminum alloy handle 125 mm size cast type complete all as specified .
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement complete with and including necessary form work etc complete all as specified and as directed.
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in sub base of floor with well finish and level of top surface complete all as specified and as directed
M&L for chequered cement concrete tiles 250mm x 250mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as directed including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for 60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in coloured glossy finish rubber mould casted laid dry over 50 mm thick sand cushioning complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified.
M&L for preparing new plastered surfaces and applying two coats of cement based paint over a coat of alkali primer all as specified and directed.
M & L, for complete removal of existing treatment on walls including preapartion on old surface of wall applying Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed by Engr in Charge.
Preparation old surfaces of wall including, complete removal of existing treatment , and applying wall putty on walls and applying two coat oil emulsion over a coat of primer complete all as in specified.
Preparation of new plaster surfaces of wall, applying wall putty on walls and applying two coat of oil emulsion over a coat of primer complete all as specified.
RCC 1:2:4 type B-1 (20 mm graded stone agg) as in plinth beam, lintel lintel and similar suspended work. etc complete all as specified and directed.
M&L Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations , filling and mass concrete all as specified and directed.
TMT steel bars of 10mm dia and over for reinforcement, cut to length, bend to shape reguired including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc beams also play as between floor and beams all as specified and directed.
M&L 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in sub base of tiles floor finished etc complete all as specified and directed by Engr in charge.
M&L for 300x450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the shade, pattern, laying etc of tiles as directed at site all as specified and directed.
S&F 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm all as specified and directed.
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm
S & F concealed Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (angular type) screwed both ends for iron pipe 15mm bore or for unions, complete all as specified and as directed.
S&F stack clamp cut of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 100 mm dia pipe including taking down unservicable clamp all as spd and directed by Engg-in-Charge
S&F PVC seat cover for EWC white colour complete with MS Hinged cromium plated all as specified and directed by Engg-in-Charge
Prepration of new plastered surfaces of wall and applying two coats of oil bound distemper with oil emulsion over a coat primer and 3mm wall putty complete all as spd.
PVC (SWR) reducers 110mm bore all as specified and directed.
TMT steel bars of 5mm to 8 mm dia and over and including 10mm dia as in stirrups, spacer and binders, cut to length, bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L 10 mm thick rendering in cement mortor 1:3 on ceiling surfaces of brick or concrete surfaces finished even and smooth without extra cement complete all as specified.
Supply & Fixing Steam Bath Cabin complete set with all accessories,Shower Steam, Self Standing box(corner/wall), Shower tray and roof with Integrated Showerhead 300 mm, White painted aluminum shower column with 2 Integrated round jets, shower rail, Thermostatic mixer with diverter, Hand shower and shelf, Chromotherapy, Speakers, Sliding door shower enclosure, 5 mm tempered glass, Steam Function -2.7 KW with Aroma Dispenser. ( Jaquar Cat No : GSB-WHT-UM-000B1H5TX Or Cera Cat Part No B2513113)
S & F intallation water heater electric Gyser with capacity of 50 Ltrs water Horizont with hanging brackets and all fitting,like MCB SP 6 to 32 Amp, 240 Volts, 50 Hz C series of multipin 15 Amps sockets point independent board with |FRLS cable 2.5 Sqmm with PVC insulated flush type controlledc by one switch with connected assembel and connection pipe all as specified and directed by Engineer -in-Charge.
S & F Water Pressure Pump size 2.5 x 2.5 cm 1HP duly mounted over PCC platform of cemented base including gate valve. The area of top shall be coverd with tin shed of size 600 x 600 and roof shall be placed fitted with MS frame works of angle size 40 x 40 x 5. The rate of shed and PCC plinth for deemed to be including in unit rates. PCC for plateform, angle Iron and Roof sheet to be paid in thier respective items.
M&L for vitrified tiles 600x1200 x 10 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles all as specified and directed.
M&L for Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15 mm thick cement mortar 1:4 to match the shade, pattern, laying etc of tiles all as specified and directed.
Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises.
M&L for making good the surfaces of floor/paltform/ roof projection etc visible with providing PCC 1:2:4 type B-0, including one coat of bounding agent complete all as specified and directed by Engr-in-charge.
S &F in repair cast copper alloy 15 dia stop cock fancy type chromium plated screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed all as specified and directed. ( Cart Part No FON-40083K & Cat No-F1019361,concealed stop coak of Cera.
S&F in reapired vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘S’ trap , single piece with PP soft Seat cover, Hinges, Fixing accessories set and cistern fitting, size 370 x 685 x 675 mm ' S' trap 300 mm). Cat Part No- CNS-WHT-851 Jaquar.
S& F Towel Rack 600 mm Long with lower hnager Cat No CAN-1181N Jaquar and Cat No-F5014131RG Cera.
S & F Swivel Looking Mirror 630 x 445 mm Cat No AKP-CHR-35795 Jaquar & Cat No-B3510149 Cera.
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
M/s Sunny Gupta
M/s Ranpat Dev Infrastructure pvt ltd
M/S CHOUDHARY TRADERS
M/S ROMESH KUMAR SHAN
M/S Shesh Paul Gupta
M/S MOHAN LAL SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .