Special repair works for existing 1No.of DSP, 2 Nos. of INS, 5 Nos of SI and 71 Nos of PC/HC quarters at Udumalpettai in Tiruppur District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation in all soils for open foundation(excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation (excluding refilling) width upto 1.25m for drains a. 0 to 2 mt.

30 : Ellispattern

31 : Weathering couse

37.1 : White washing 3 coats (slaked)

41 : Painting - New "iron work"

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

ANNEXURE 3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 :Plain cement concrete 1:2:4 using 20m gauge hard broken stone jelly (using crushed stone sand)

3.3.2 : P.C.C. 1:8:16 using 40 mm broken brick jelly (using crushed stone sand)

6.2.1 : Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

10.2.1 : Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) (using crushed stone sand) a. In Foundation and basement

e. In Third Floor

14.1.II : Precast Cupboard slab 40mm tk. using standardised concrete mix M20 (Using crushed stone sand) e) In Third Floor

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

32.1.1 : Finshing the top of Terrace floor with Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) Mixed with Super Plasticiser

34.1: Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

35.1.1: Plastering with CM 1:3, 12mm with WPC (using crushed stone sand) Mixed with Super Plasticiser

35.1.2: Spl. Ceiling plastering in C.M. 1:3,10 mm tk.(using crushed stone sand) Mixed with Super Plasticiser

38.7 : Two coats of Plastic Emulsion PAINT including primer

43.1 : Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - G.F. (using crushed stone sand)

56.4.1.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F. (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm dia UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

ANNEXURE II A1:Dismantling the damaged brick works of cement mortar for the under 3m Height in all floors without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris away from the site etc., all complete

A2:Dismantling of Floor finishing and dadooing walls in cement mortar with mosaic tiles / glazed tiles / Cuddapah slabs, clearing the debris away from the site etc., all complete

A3: Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., all complete

A4: Dismantling the existing damaged R.C.C 1:2:4 Cover slabs ( one of cement, two of Crushed Stone Sand and four of HB stone jelly ) with out affecting the adjacent structures, including the hire charges of tools and plants, and scaffolding if necessary, and clearing the dismantled materials away from the site etc., all complete

A5: Dismantling the damaged Pressed tiles laid over cement mortar and Weathering Course lime concrete without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris away from the site etc., all complete

A6:Pointing the Disturbed Pressed Tiles in C.M 1:3 (One of Cement and three of Crushed Stone Sand) 20mm thick for full depth of tiles including curing and racking out the joints of 20mm deep and disposing the debries away from the site etc.,

A7:White washing two coats for old walls using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., complete in all respects

A8: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including clean removal of old paint using Sand paper etc., complete in all respects

A9: Painting the old iron work with two coats of ready mixed first class synthetic enamel paint of approved quality and brand including clean removal of old paint etc., complete in all respects

A10: Painting the old walls with two coats of Oil Bound Distemper of approved brand over existing thorough scrapped wall surfaces including cost of paints, putty, brushes, watering, curing, thorough scrapping, clean removal of dirt and dust etc ., all complete

A11 :Painting the old walls with two coats with ready mixed Plastic Emulsion Paint of first class quality paint of approved colour and shade over a priming coat, including thorough scrapping, clean removal of dirt and dust etc., complete

A12: Run off the 2 wires of 4sqmm copper PVC insulated single core cable with one run of 7/20GI stay wire suspended with porecelin reel insulators at 1.0m centre to centre for support of phase and neutral cable from top of street pole to the house / flats including all materials etc... all complete for EB service connections including labour charges for fixing GI wire and MS angles (For EB Service connection single phase)

A13: Supplying and fixing of 4' long 18 Watts LED tube light with fittings

A14 :Supplying and fixing of 9 Watts LED bulbs

A15: Supplying and fixing of 12 Watts LED bulbs.

A16: Supplying and fixing of Bulk head fittings suitable for 12W bulb.

A17: Supplying and fixing of 25 Watts LED Street light .

A18: Removing and redoing of new Ceiling rose fittings including labour charges for fixing of etc.,

A19: Removing and redoing of new Batten type holder fittings including labour charges for fixing of etc.,

A20: Removing and redoing of new 5 Amps Flush type switch fittings including labour charges for fixing of etc.,

A21: Removing and redoing of new 5 amps 5 pin Plug socket fittings including labour charges for fixing of etc

A22: Removing and redoing of new 3mm thick Laminated Hylem sheet fittings including labour charges for fixing of etc.,

A23: Removing and redoing of new 5 " Butt Hinges fittings including labour charges for fixing of etc.,

A24: Removing and redoing of new 10"X5/8" ALU. ALDROP fittings including labour charges for fixing of etc.,

A25: Removing and redoing of new 6"X1/2"ALU. TOWER BOLT fittings including labour charges for fixing of etc.,

A26: Removing and redoing of new Door stoper Tfittings including labour charges for fixing of etc.,

A27: Removing and redoing of ALU.HANDLE WITH C.P.SCREWS Tfittings including labour charges for fixing of etc.,

A28: Removing and redoing of new 3 " Butt Hinges fittings including labour charges for fixing of etc.,

A29: Removing and redoing of new 4"X5/8"ALU. TOWER BOLT fittings including labour charges for fixing of etc.,

A30: Removing the damaged broken door / window / ventilators including the removal of frames, hinges, fastenings and shutters form the existing structure and stacking the same carefully for reuse if any

A31: Supplying and Fixing of SFRC Manhole cover of Heavy including labour charges for fixing in position etc., all complete a) 0.75M X 0.75M

A32: Supplying and fixing of 3mm thick pin headed Glass panels with aluminium anodised ‘U’ shape beeding of size 12x12mm with 107 gram in average weight for 1m length with aluminium bolts and nuts for the shutters of the steel windows already supplied to suit all the size

M K SARAVANAN (BID ID -1080066)

M Prabhu (BID ID -1084109)

M/s.V.S.D CONSTRUCTION (BID ID -1084048)