WOTK NO 3

Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per Si No. 2.8.1

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in frenches, 2 plinth sides of foundation etc. complete (Under Floor) as per Si No 2.25 (a)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1.4.8 (1 Cement : 4 coarse sand (zone-lli) derived from natural sources 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per St no 4.1.8

Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 16 (1 cement 6 coarse sand) as per Si no 6.4.2 DSR

15 mm thick cement plaster of mox 16 (1 cement & 6 course sand) 5 Inner Side as per IS 13.5.2

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and 6 reinforcement-All work up to plinth level in 11.53 (1 cement 1.5 coarse sand 3 graded stone aggregate 20 mm nominal ecze) as Si No-5.1.2

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site 7 including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. As per SI. No-5.22 B.1

Providing and fixing 18 mm thick Granite (gang saw cut) mirror polished, premoulded and prepolished, machine out for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement 8 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing. curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite stone slab of colour black, Cherry/Ruby red (Slab area above 0.50 Sq. M.) As per Si no-8.2.2.2

Stone work plain ashlar in domes, in super structure upto floor V level in cement mortar 1:3 (1 cement 3 coarse sand) including centering, shuttering and pointing with white cement mortar 1:2 (1) white cement 2 stone dust) with an admixture of pigment matching the stone shade Both Face Dressed. Red Sand Stone DSR

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. As Per DSR Vol 1 Page 307 Code 8.6