Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹16.0 Laccepted-aoc | accepted-aoc |
Tender Value
₹16.0 L
EMD Value
₹20,000
Closing Date
19 Feb 2026, 10:30 pmClosed
Public Works Department
Shri.GIRISH B DESAI EE PWD Division Chikodi
Construction of Dr. B. R. Ambedkar Bhavana at Donawada at Chikodi taluka of Belagavi district Under the head of 8443 Deposit Contribution.
PWD/2025-26/BD/WORK_INDENT32724
PWD/2025-26/BD/WORK_INDENT32724
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Chikkodi
8 documents required · 8 mandatory
The Tenderer shall obtain any civil construction work the workdone certificate from financial year 2020-21 to 2024-25 (25% of the Amount Put to Tender i.e., Rs. 3.99 Lakhs) in the prescribed format from the Competent Authority not below the rank of Executive Engieer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.
The Tenderer shall achieved in at least one financial years an average annual financial turnover from financial year 2020-21 to 2024-25 of Rs. 15.98 Lakhs. (not less than the estimated cost under this contract)
The EMD of Rs. 20,000/- shall be paid in full through e-payment in favour of Executive Engineer, PWD, Chikodi Dn, Chikodi
CAT-IIA Caste Certificate issued by a competent authority / Tahsildar
For CAT-IIA contractors reservation category participate in the tender, the contractors should upload the domicile certificate stayed in KARNATAKA for minimum of 10 years issued by a competent authority / Tahsildar
₹500
₹20,000
19 Feb 2026
3 Feb 2026
21 Feb 2026
17 Feb 2026
Construction of Dr. B. R. Ambedkar Bhavana at Donawada at Chikodi taluka of Belagavi district
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off ...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8%
Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%
Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50%
Estimate for Electric work
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm . etc. as required.25mm
Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.4"x4"x3" ( 101x1...
I. Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi st...
c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine crews, bolts nuts etc., complete on the existing me...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch
6A Three Way socket
Stepped Fan Regulator two moudule
16Amps one way switch
32Amps DP switch
6/16Amps universal socket
LED light fitting 1 x 4'- 20/22 w Each
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32Amps
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall/oodboard/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase/3phase/...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutout sand other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried inapit. The pits hould be ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball beari...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.8" x 6" ...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.12" x 12...
Fixing all types and all capacities off luorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Royalty Order.pdf
Others - Royalty • 4.03 MB
Circula.pdf
Others - Govt Ltr • 2.53 MB
formats-bldg.xlsx
Others - Specification • 0.04 MB
building_specifications.zip
Others - Specification • 0.16 MB
bid-doc_wi_32724_kw-1-CAT-IIA.doc
Tender Document • 0.73 MB
technical specifications.zip
Others - Specification • 0.27 MB
electrical tech specifications.pdf
Others - Specification • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .