Loading…
Loading…
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
29 Aug 2026, 6:00 pm4d left
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist-Darjeeling, WB-734009
MISCELLANEOUS B/R REPAIR TO BUILDINGS AND ITS SERVICES AT SHAITAN SINGH VIHAR, SANJAY KUMAR VIHAR, MANOJ PANDEY VIHAR AND MAP PH-II UNDER AGE B/R-I OF GE SUKNA AT MIL STN SUKNA
2026_MES_783306_1
GE Sukna/9105
Open Tender
Civil Works
Works
180 days
SUKNA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SUKNA
₹80,000
7 Aug 2026
7 Aug 2026
31 Aug 2026
8 Aug 2026
29 Aug 2026
22 Aug 2026
8 Aug 2026 - 29 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | M&L for Plain Cement Concrete Type E2 1:5:10 (using 40 mm graded stone aggregate) as in sunken floor, foundations, filling and mass concrete complete all as specified and directed. | 3 | Cum | - | - |
| 2 | M&L PCC 1:2:4 type B-1 (using 12.5 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, filling in pressed steel door frames, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. | 2 | Cum | - | - |
| 3 | Supply only integral water proofing compound complete all as specified. | 27 | Kg | - | - |
| 4 | M&L for repair to broken/damaged RCC chajjas by making good with PCC 1:2:4 type B1 or rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound to top and sides and rendering 5 mm thick to soffits in cement mortar 1:3 including necessary formwork complete all as specified and directed. | 30 | Sqm | - | - |
| 5 | M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheets and brick wall, thickness of concrete bed exc. 5 cm and not exc.10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork ht upto 7m complete all as specified and directed. | 55 | RM | - | - |
| 6 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting exc. 20 cm in girth complete all as specified and directed . | 15 | RM | - | - |
| 7 | S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed. | 40 | Sqm | - | - |
| 8 | S&F 30 mm thick flush door shutters solid core construction, with MDF board exterior grade, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed. | 15 | Sqm | - | - |
| 9 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. | 35 | Each | - | - |
| 10 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. | 17 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.17 MB
TENDERDOCUS9105.pdf
Tender Documents • 1.63 MB
BOQ_877697.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].