Special repair for preparation of Modern Record Room in Basement on Mini Sectt. Admin Block building Sector 12 Faridabad in Faridabad District REINVITED

Amount

First class brick work laid in sand mortar 1:6 in first storey upto 4 metres above plinth level. [HSR 11.7]

12 mm thick cement plaster 1:6 [HSR 15.7]

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall [HSR 15.12]

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:- door and window frame size 114 mm X 50 mm with 35 mm wide double rebate [HSR 18.34D]

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. [HSR 18.12]

Factory- manufactured paneled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., (non-coniferous timber other than tak, conforming ot I.S. specification no. 1003, kiln-seassoned), with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail and 100 mmm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete, fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position)- HSR 17.90a. Note: In case of any difference in the unit & nomenclature of any of the HSR Items of Civil PH and E.I depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

Factory-manufactured wire gauze door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc, (non coniferous timber other teak, conforming to I.S. specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide locak rail 200 mm wide bottom rail and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fitting other than specified above, but including labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide) HSR 17.92a. Note: In case of any difference in the unit & nomenclature of any of the HSR Items of Civil PH and E.I depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)-commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges:-35 mm thick [HSR 17.93aiii] Note: In case of any difference in the unit & nomenclature of any of the HSR Items of Civil PH and E.I depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete. [HSR 16.24]

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. [HSR 16.25]

Providing and Applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) [HSR 16.81]

Providing and laying fire proof paint complete in all respect or as desired by Engineer-in-Charge of work (NS)

Providing, transporting, cutting, laying and connecting polycarbonate multi-cell panel system minimum 8mm thick with polished texture and UV protection on both side confirming to IS 14443 complete with all modular accessories as per drawings and specification. The material, colour, specification and the suppliers will have to be got approved by the Engineer before placing order. The supporting frame will be paid separately. The allying and connection of sheets will have to be executed under strict supervision of the experts of the manufacturer / suppliers complete in all respect or as desired by Engineer-in-charge of work (NS)

Raghubir Singh