Repair to joinery, plumbing, sanitation, connected works and welcome maintenance at AF Stn Bikaner under GE (AF) Nal

Amount

Demolition of plain cement concrete in ground floor and paving n.exc. 15 cm thick below or above ground level and removing debris to outside MoD land where directed complete all as specified & directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. and removing debris to outside MoD land where directed complete all as specified & directed.

Demolition of reinforced cement concrete of any description as in beams, slabs, cover slabs of manholes, landings, chajjas, shelves and similar works and removing debris to outside MoD land where directed complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing debris to outside MoD land where directed complete all as specified and directed.

Taking down cement plaster any description on brick wall surfaces etc including raking out joints hacking for key, scrubing down with water etc and removing debris to outside MoD land where directed complete all as specified and as directed.

Taking down chowkhats / frame with shutter (area n. exc. 1.50 sqm each) (without taking off shutters from frame) and making good the disturbed surfaces complete all as specified & directed.

Taking down chowkhats / frame with shutter (area exc. 1.50 sqm but n. exc. 4.00 sqm each) (without taking off shutters from frame) incl making good the disturbed surfaces complete all as specified & directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing from site as required complete all as specified and directed.

Taking down and Easing of door shutter of any size for smooth opening/closing by tightening of butt hinges in position including changing of unserviceable existing butt hinges, adjustment of butt hinges in position, adjustment of existing iron mongery, welding etc. and re-fixing in same opening complete all as specified and directed.

Taking down and Adjusting / repairing of steel window shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position make fully functioning complete all as specified and directed.

M&L preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; washing etc. and applying one coat of white lime wash complete all as specified and directed.

M&L preparation of plastered or unplastered old decorated surfaces of ceiling incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; washing etc. and applying one coat of white lime wash complete all as specified.

M&L preparation of old decorated surfaces of walls (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L brick work with fly ash brick of size 230mm X 110mm X 70mm (minimum compressive strength of brick 75 kg / Sqcm) straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

M&L 12mm thick rendering in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified.

M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified.

M&L 5mm thick rendering in cement mortar 1:3 on fair faces of brick/concrete surfaces of chajjas or ceiling, finished even and smooth using without extra cement complete all as spd.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying two coats of white wash complete all as specified and directed.

Material & Labour prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage / plain pattern of approved tint / shade(s) over a coat of water based primer complete all as specified and directed.

Preparation of new steel surfaces including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Plain Cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in pressed steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.

Supply and fixing 3mm thick sheet glass(plain/frosted) ordinary quality any size and in any type of frame and glazing with oil puty (or beading) in squares n.exc. 0.50 sqm in each pane including hacking out of old broken glass from wooden or steel frames complete all as specified and directed

S&F first quality 10mm thick high breaking strength Anti- Skid non-abrasive, glazed ceramic tiles (coloured) dark shade, area of each tile exc 0.04 sqm but n. exc. 0.09sqm (square/rectangular) as in corridors, parking, pathways, walkways etc set and jointed in cement slurry and pointed in coloured cement laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

S&F Premium quality joint free Non Skid glazed ceramic tiles 7 to 8mm thick (square/rectangular) (coloured) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in cement slurry and pointed in coloured cement laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

All as per serial item No 24 here in before but as on vertical surfaces such as skirting dado and riser to steps etc. and over 10mm thick rendering in cement mortar 1:4

S&F 1st quality, joint free glazed ceramic coloured tiles ( shade as approved by AGE B/R AF Bikaner) of 300mm x 450mm x 7mm thick on vertical surfaces of walls such as skirting / dado set and jointed with neat cement slurry and pointed in white cement with pigment to match the shade of tiles, laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

S&F as in repairs machine cut Granite slab 15 mm thick as in steps, pillars, window cills, cooking platforms and like and incl 10mm thick (minimum thickness) cement screed 1:4 and setting coat 3mm thick in cement morter 1:2, set and jointed with white cement slurry mixed with pigment to match the shade of slab incl cutting, rubbing and polishing etc complete all as spd. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting with machine and polishing to achive the desired granite finish all as specified

M&L 40mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, surface finished even and smooth without using extra cement complete all as specified and directed.

Supply & fixing glass dividing strips, 3mm thick, 38mm wide complete all as specified and directed.

Supply and fixing as in repair factory made machine pressed coloured chequred cement concrete tiles 200mm x 200mm x 25mm thick (with grey cement and pigments), set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in cement mortar 1:4 complete all as specified & directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base / sub floors, surface finished even and rough to receive floor topping complete all as specified & directed.

M&L Precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

S&F pressed steel frames for doors of size 125 x 60 mm with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified and directed.

M&L pressed steel frames for doors of size 105 x 60 mm with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified and directed.

Supply and fixing plain, framed, panelled shutters, 35mm thick (with two panels) of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink prime rcomplete all as specified & directed.

Supply and fixing glazed and gauged skeleton shutters (factory made) 30mm thick, 2nd class hard wood open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc incl priming coat. The size of member of shutters as specified in SSR Part-I Section 8 clause 8.20 (a) incl kiln seasoned and chemically pressure treated, complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified and directed.

Suppling & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm thick plain colour PVC sheets reinforced with MS square tube complete all as specified and directed.

S&F anodised aluminium section Powder coated (colour of powder coating as approved by AGE B/R AF Bikaner) (Minimum Thickness of powder coating 50 micron) weighing 0.55Kg/m for frames of doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified.

S&F anodised aluminium door shutter using Powder coated (colour of powder coating as approved by AGE B/R AF Bikaner) (Minimum Thickness of powder coating 50 micron) aluminium section with top rail, middle rail, stiles of size 83.5mmx44.45mmx1.49mm and bottom rail of size 114.3mmx44.45x1.49mm as in door shutters including necessary jointing cleats, glazing clips, rubber neoprene packing , handles 2 Nos in each door, hinges, anodised aluminium snap beading screws, all necessary builders hardware etc complete all as specified and directed.

S&F anodised aluminium window and ventilator shutter using Powder coated (colour of powder coating as approved by AGE B/R AF Bikaner) (Minimum Thickness of powder coating 50 micron) aluminium section with top rail, bottom rai and stiles of size 47.62mmx44.456mmx1.67mm including necessary joining cleats, glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 No.) suitable handle (1 No.) all necessary builders hardware etc. complete all as specified and directed

S&F as in repair 5.0 mm thick black color sheet glass glazing with necessary powder coated aluminium clips in metal surrounds complete all as specified and directed.

S&F in repair MS shutter of PBI Sheet 1mm thick with box type steel frame for built in cupboard, almirah etc incl applying two coats of synthetic enamel paint over a coat of red oxide primer on both surfaces and locking arrangement with 4 lever lock complete and all as specified and directed. Note:- For payment purpose, front area of shutter shall only be measured.

Material & Labour Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing Mild steel butt hinge medium weight, clod rolled, 100mm, ISI marked, complete all as specified & directed.

Supply and fixing Mild steel butt hinge medium weight , clod rolled, 75mm, ISI marked, complete all as specified & directed.

Supply and fixing barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.

All as per serial item No 53 here in before but as in repair

Supply and fixing barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed.

All as per serial item No 55 here in before but as in repair

Supply and fixing aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed.

All as per serial item No 57 here in before but as in repairs

Supply and fixing aluminium fabricated type extruded handles of size 100 mm complete all as specified & directed.

All as per serial item No 59 here in before but as in repairs

S&F fixed as in repairs door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg, complete all as specified and directed.

M&L Cutting openings, through brick walls built in cement morter for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts, fixed on plate or staple plate complete all as specified & directed.

All as per serial item No 63 here in before but as in repairs

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed.

All as per serial item No 65 here in before but as in repairs

S&F as in repairs of 300mm mild steel ordinary rat tail rod pattern door spring incl roller and roller plate complete all as specified.

S&F as in repairs Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (Stiles) sandwitched with 2 mm thick PVC sheet on both face (design and colour of PVC sheets as approved by AGE B/R Bikaner) with wood free EPS raised panel design, supplying & fixing in frame at site and including taking down chowkhats with shutter as per specification & drawing complete all as specified & directed.

Supply and fixing continuous piano hinges mild steel bright finish width of flap 30mm fixed in repair incl taking out the existing complete all as specified & directed.

S&F factory made Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed / guaged skeleton shutters, EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos. (g) One shop coat of zinc oxide on all steel surfaces complete all as specified. (h) fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed NOTE :(i) Windows shall be provided as per the TD of Chief Engineer Chandigarh Zone, TD-219 i.e typical details of box window(Steel) with fly proof shutter. (ii) The mode of measurement shall be only one for the set of two i.e. wire mesh window and glass window at one location and nothing extra shall be measured on this account. (iii)Wire gauge and sheet glass shall be measured and paid for separately.

M&L Welding works as in repairs to steel surfaces n. exc 2.5cm in length and not exc. 6mm thick complete all as specified.

Supply and fixing as in repairs hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt type hinge plate and fixed with screws of size 100mm complete all as specified & directed.

S&F as in repairs 40mm dia mild steel cup board knob, polished, fixed with screw and washer complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection and removal from site complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection and removal from site complete all as specified and directed.

Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.

Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.

M&L cutting chases, pining in making good to facings where required & pointing in cement mortar 1:3 to ends etc or edges of landings, steps cills, sunshades, shelves, lintels, etc and cutting chasesfor concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls complete all as specified and directed.

Supply and fixing as in repair 15 mm bore Stop valves,chromium plated, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing as in repair long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed.

Supply and fixing as in repair angle stop valve, chromium plated, brass fancy type, screwed down, high pressure with crutch or butterfly handle screwed down , screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed complete all as specified and directed.

Supply and fixing as in repairs central hole Basin Mixer for mixing Hot & Cold water, without poupwaste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

S&F as in repair wall mounting mixer 3-in-1 with L-Bend system provision for bath and overhead shower hot and cold water diversion, 15mm bore (fancy type) cast copper alloy, chromium plated suitable for 15mm bore GI pipe or union, complete all as specified and directed.

S&F in repair Brass CP wall mixer 3-in-1 including flexible stainless steel pipe 1.5 mtr length for provision of telephonic hand shower for mixing hot and cold water,cast copper alloy, screwed down high pressure for iron pipe 15 mm bore complete all as specified and directed.

Supply and fixing as in repairs wall mounting mixer 2-in-1 for mixing Hot & Cold water cast copper alloy, chromium plated suitable for kitchen sink swinging spout, fixed to 15mm bore GI pipe or union, complete all as specified and directed.

Supply and fixing as in repairs15mm dia PVC connection with brass nut, of length 450mm, complete all as specified and directed.

Dismantling water tank 500 litres capacity and removing from site complete all as specified and directed.

Dismantling water tank 1000 litres capacity and removing from site complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified ISI marked.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S & F in repairs vitreous china padastal pattern, "EWC" white with connection to trap, and to flushing pipe anti-syphonage pipe and including PVC seat with cover and CP jet etc. complete all as specified and directed.

Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap and flushing pipe complete incl trap, set with cement concrete, complete all as specified and directed.

Supply and fixing as in repairs PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor, complete all as specified & directed.

Supply & fixing as in repairs vitreous china wash hand basin, white flat back, size 450mm x 300mm incliding pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets incl cutting for and pining in ends of brackets, complete all as specified & directed.

S&F as in repairs 15mm bore pillar tap long neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F as in repairs chromium plated waste coupling fitting 100mm / 75mm bore pipes to kitchen sinks complete all as specified and directed.

S & F as in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed.

S&F as in repair stainless steel curtain rod 25mm dia 0.80mm wall thickness fixing with heavy duty dead end and free end brackets/supporters and ornamental type stainless steel end nobs/caps etc complete all specified and directed.

S&F as in repair door beading 40mm x 6mm with metallic body fixed to bottom rail of door with screws and washers of suitable size complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe, complete all as specified and directed.

S&F as in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe, complete all as specified and directed.

S&F as in repairs chromium plated shower rose with or without swivel joints 125 mm dia including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel box type fixed to wall,with chromium plated brass screws, complete all as specified & directed.

S&F as in repair 100 mm dia mild steel chromium plated grating with or without waste hole as per requirement complete all as specified and directed.

S&F as in repair PVC waste down pipe of 32mm bore fixed to basin complete all as specified and as directed.

S&F as in repair CP Health faucet with 1.50 Mtr flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed.

S&F as in repair Chromium plated jet spray with CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed.

S & F in repair stainless steel ( SS 304 grade ) sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste pipe, waste coupling cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm complete fixed in repair complete all as specified and directed.

S&F as in repairs PVC bath cabinet, size 450mm x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 78cmX91cmX25cm made out of 0.80 mm thick of stainless steel sheet , fixed in wall with rawl plugs and screws complete all as specified and directed.

S&F as in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F as in repair PVC flush kit for low level flushing cistern, 10 ltrs capacity, white, valveless, syphonic action type complete all as specified.

S&F as in repair soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screws complete all as specified.

S&F Sheet glass shelf assembly 30cm size consisting of 5.5mm thick toughened sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing incl screws, fixed as in repair complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, fixed as in repair complete all as specified and directed.

M&L taking down Aluminium shutters of any description or any size and re-fixing in same opening after re-securing or easening and adjusting including repair of hinges, operated systems, anchoring bolts and erecting in position and making fully functional as directed complete all as specified & directed.

M&L 75mm thick plain cement concrete 1:3:6 type C-2,using 40mm graded crushed stone aggregate as in plinth protection laid in bays and surface finished fair and even without using extra cement complete all as specified & directed.

S&F as in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of heavy duty and fixed complete all as specified and directed.

Dismantling framed wooden work in fillets, rails, posts, rafters, ladders, staircase etc under 40 sqcm area in section complete all as specified and directed.

S&F framed work as in Steel Gate of angle or other section with gusset plate, rails, braces, stair case etc Fe 410-W (Gde-E-250) quality 'A' complete drilled for fixing of steel including welding, (PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing and building upto 8 mtr complete all as specified.

M&L taking out rolling shutter push type size of rolling shutter n.exc 6sqm and repairing of rolling shutter with necessary repair work for smooth functioning of defective parts i.e, re posting of laths, riveting to old defective rivets, tightening nuts and bolts, re-stretching of spring greasing to movable parts and at guide channel and and re-fixing in position complete all as directed.

S&F as in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, complete all as specified.

S&F as in repair 110mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.

S&F as in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, complete all as specified.

S&F as in repair 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified and directed.

S&F as in repair 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed.

M&L 100 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub floors, filling and mass concrete etc complete all as specified and directed.

M&L factory made Rubber moulded precast conctete interlocking paver block 60 mm thick M-35 Grade (coloured), Glossy finish pre polished of any shape and size with white cement and pigment confirming to IS 15658-2006 over and including sand cushioning 25mm thick (average thickness) complete all as spfd and directed.

Dismantling of wall /ceiling boards (fibre , PVC , Pulp , insulation etc ) of any description,any thickness including frame/grid , fillets work etc complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings incl ridge etc. complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick and 150 GSM of colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick and 150 GSM of colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F of bands straps supports, wind ties or stays including washers and similar small articals for securing AC/GI/galvalume sheets,RWP or other similar works etc complete all as specified and directed.

S&F factory made 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels having commercial type designer wooden veneer of 1.0mm thickness pasted on both sides including for the provision of suitable blocks for taking mortice locks, latches,inc or other necesary fittings complete all as specified and directed. Note :- Before quoting the unit rate Contractor shall consider the aspect that Design of wooden veneer shall be approved by GE (AF) Nal

Supply and fixing Brass handles fancy type with golden Antique finish of size 150mm fixed to flush shutters with countersunk screws complete all as specified & directed. Note :- Before quoting the unit rate Contractor shall visit the office of AGE B/R AF Bikaner for sample of the handles, nothing extra shall not be paid on this account.

Supply and fixing 300 mm long brass sliding door bolt fancy type having golden antique finish with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate to flush shutters complete all as specified & directed. Note :- Before quoting the unit rate Contractor shall visit the office of AGE B/R AF Bikaner for sample of the sliding door bolt, nothing extra shall not be paid on this account.

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia and 60 cm long between flanges, fixed to walls with necessary screws complete all as specified and directed.

S&F as in repair of modular kitchen cabinet comprising of Bottle Rack/Basket/Basket Partition/Cutlery Box/Grain Trolley/Plate rack/Cup and saucer Rack by taking out existing cabinet and refixing with all fixtures/fitting like stainless steel sliding channels of required size, handle, necessary screws and hinges etc. for fixing the items fitted in position all as space available at site complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel having dia of ring not less than 150mm fixed to walls with necessary screws complete all as specified and directed

durga construction company

JASRAJ AND COMPANY

SHREE GURU NANAK CONSTRUCTION COMPANY

M/S BIKANER CHEMICAL LABORATORIES

m/s gaurav enterprises