PROVN OF CERTAIN MINOR WORKS AT AF STN CHANDIGARH UNDER GE (AF) CHANDIGARH

Hardcore of gauge exceeding 63 mm but not exceeding 100 mm of broken stone or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface , complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete ,75 mm thick (1:4:8) type D-2, using 40 mm graded mechanically crushed stone aggregatesd and finished the surface rough to provide adequate bond for the topping as in sub base ,foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete ,1:3:6 type C-1, using 20 mm graded mechanically crushed stone aggregates as in copings and the like including weathering, slightly rounded or chamfered angles and throating , complete all as specified and directed by Engineer-in-Charge.

First quality glazed designer pattern ceramic coloured tiles of size 450x300x7mm, thick fixed in pattern to wall ( combination of dark and light colour with boarder) laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Notes :- (i) Design, pattern and colour of tiles will be as approved by GE. (ii) Quoted rate is inclusive of any no of Highlighters required for making pattern

Providing and laying 80mm thick factory made machine pressed interlocking paver block of M-40 grade of shape and size confirming to IS 15658-2006 of approved colour,design & pattern laid over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra , complete all as specified and directed by Engineer-in-Charge. Notes :(i) Design ,color and Pattern shall be as approved by GE/Engineer-in- Charge. (ii) Quoted rates are inclusive of fine sand and nothing extra shall be admissible on this account.

Granite stone slab Machine cut 18 to 20 mm thick as in cooking platform ,floor,steps, pillars, window cills,and like and including 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement mortar 1:2, 3mm thick, with araldite adhesives set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing etc in and including demolition of stone slab and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in white cement with pigment and removal of rubbish outside MoD land ,complete all as specified and as directed by Engineer -in-Charge. Notes:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and machine polishing to achive the desired granite finish

Aluminium anodised work for shutters of doors, windows, ventilators, and partitions (Fixed portions) including providing and fixing hinges/pivots and making provosion for fixing of fittings where ever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be fixed and paid separetly ) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with equired EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawing and all as directed by Engineer -in-charge.

Pre-laminated particle board 12mm thick , interior grade, pre-laminated both side with decorative choice laminaton fixed with screws to aluminium/timber frame work, as in doors or partitions, complete all as specified and directed by Engineer-in-Charge

Sheet glass 5.5 mm thick, selected quality in squares not exceeding 0.5 Sq. m in each pane including rubber packing, glazing strips in aluminium frame for door/ windows at any position and any height etc,complete all as specified and directed by Engineer-in- Charge.

GI wires 4 mm dia fixing along wall with J hooks inserted in wall ,complete all as specified and directed by Engineer-in- Charge.