PROVN OF TOILET BLOCK AND SECURITY FENCING NEAR 190 MTN BDE UNDER GE TAWANG.

Amount

B/R Items Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil completed all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation, etc. or for shaft, wells, cesspits, manholes, pier holes, etc,. Not exceeding 10 Sqm on plan and not exceeding1.5 m depth and getting out in hard/dense soil completed all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mosed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50M and making good surface and getting out hard/dense soil.

M & L for hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface completed all as specified and directed.

M & L for cement concrete in foundation, filling and mass concrete in type D2 1:4:8 (40mm graded aggregate) completed all as specified and directed.

M & L for cement concrete as in post holes, walls or retaining walls, any thickness,size or shape including pilasters, butttressses columns, pillars boundary pillars type C2 1:3:6 (40mm graded aggregate)

M & L for Pre-cast cement concrete block masonry exc. 10 cm in width with solid blocks of PCC ( 1:3:6) type C-1 using 20 mm graded aggregate, setting in mortar 1:6 , complete all as directed and specified.

M & L for Pre-cast cement concrete block masonry, 10 cm in width with solid blocks of PCC ( 1:3:6) type C-1 using 20 mm graded aggregate, setting in mortar 1:6 , complete all as directed and specified.

M & L for walling of random rubbles uncoursed, well bonded bedded and solidly hearted built in CM 1:6 (below ground level) complete all as specified and directed.

M&L formwork to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter completed all as specified and directed.

M &L for RCC nominal mix type B-1 (1:2:4) 20mm graded aggregates foundation, including rafts footings, foundation beams, plinth beams: bases for columns, etc: basement slabs, under reamed piles and mass concrete completed all as specified and directed.

M & L for formwork for fair finsihed surface to sides of pillars, posts, struts, piers, columns and stanchions completed all as specified and directed.

M&L for RCC nominal mix type B-1 (1:2:4) (20 mm graded aggregate) Columns, pillers, post & structurs completed all as specified and directed.

M& L for TMT bars 10mm dia and over, reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (anealed)not less than 0.90mm dia, complete all as specified and directed.

M & L for TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (anealed)not less than 0.90mm dia, complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry exc. 10 cm in width with solid blocks of PCC ( 1:3:6) type C-1 using 20 mm graded aggregate, setting in mortar 1:4 , complete all as directed and specified.

M & L for rendering 10 mm thick on fair faces of brick/concrete work using cement mortar (1:4) rough finsihed surfaces to receive tiles completed all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick/concrete work using cement mortar (1:6) rough finsihed surfaces to receive tiles completed all as specified and directed.

M & L for three coat of white washing on new plaster wall surface including preparation of plastered surfaces complete all as specified and directed.

M & L for two coat of cement base paint on plastered surfaces with one coat priming over alkali resistant priming paints on new wall surfaces including preparation of surface complete all as specified and directed.

M & L for 75mm thick PCC type D2,1:4:8 (40mm graded stone aggregate) as in sub base of floor compete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even, complete all as specified and directed.

M & L for 25mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in floor finishing the surface even and rough to receive the topping layer completed all as specified and directed.

M & L for screed bed or bedding layer of cement mortar (1:4) 15mm thick for laying floor finishers completed all as specified and directed.

M & L non-skid ceremic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match completed all as specified and directed.

M & L for coloured glazed ceramic tiles in vertical surface 300 x 200x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match completed all as specified and directed.

S & F 40 mm thick, second class hardwood, clean swan boarding,fixed with nails,in any position, complete all as specified and directed.

S & F second-class hard wood timber scantlings, wrought timber framed and fixed in any position with nails completed all as specified and directed.

S & F 4mm thick plywood, grade BWR, type BB, fixed with nails to timber framework as in ceiling etc complete all as specified and directed.

S& F steel work in tubular trusses including special shaped washer etc. complete usng ERW or induction butt welded tubes comforming to IS 1161 grade st-240 for Roof trusses (framed), trussed, purlins, complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws completed all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws completed all as specified and directed.

S & F second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints completed all as specified and directed.

S & F 30 MM thick 2nd classs hard wood glazed and skelton shutter open rebated and prepaired to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secuering glass etc size of members of shutter as specified in SSR part-I, sec 8 clause 8.24 (a) completed all as specified and directed.

S & F plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. 2nd class HW rail & style of size as per IS: 1003 (Part I), Kiln seasoned & chemically pressure treated completed all as specified and directed.

S & F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube completed all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fittted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site completed all as specified and directed.

S & F 100 mm long butt hinges medium grade cold rolled mild steel and fixed completed all as specified and directed.

S & F alluminium anodised barrel tower bolts 150mm of extruded section and fixed completed all as specified and directed.

S & F 150mm long aluminium handles cast type anodised completed all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed completed all as specified and directed.

S & F 75 mm long butt hinges medium grade cold rolled mild steel and fixed completed all as specified and directed.

S & F alluminium anodised barrel tower bolts 125mm of extruded section and fixed completed all as specified and directed.

S & F 100mm long aluminium handles cast type anodised completed all as specified and directed.

M & L 3mm thick sheet glass, ordinary quality and glazing with oil puty in square n exc 0.5 sqm in each plane completed all as specified and directed.

M&L for preparation of new wood surfacesof any description exc 10CM width or girth and applying two coat of synthetic enamel paint over a coat of pink primer completed all as specified and directed.

S & F in vitreous china urinal,half stall type,white including providing and fixing plugs,bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union of discharge pipe including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc complete incl making good to floor.

S & F pillar taps 15mm bore dia, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or Cold with long shanks and fly nuts, screwed for iron pipe and fixed completed all as specified and directed

S&F for 20mm outer Dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc completed all as specified and directed.

S & F PVC (SWR) pipe 75mm bore single socketed, in any length with rubbber ring joints, laid in trenches or floor completed all as specified and directed.

M & L PVC (SWR) floor trap with grating including jointing with sovlent cement of 75mm dia completed all as specified and directed.

S&F soap dish, viterous china white, appx size 160x160x90mm completed all as specified and directed.

S&F for Towel Rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms completed all as specified and directed.

S & F 15 mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed completed all as specified and directed.

S & F PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, fixed in repairs complete all as specified and directed.

S & F stop cock fancy type 15mm dia CP high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union completed all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 580x450mm Taps, waste, chain and plug and porcelein stopper but including cutting for and pinning in ends of brackets or erecting stand completed all as specified and directed.

S&F CP Grating round 140 mm size of PTMT. (Minimum weight 50gms)

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including down pipe, set cover and flush pipe complete all as specified and directed.

M & L for formwork to faces of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. for rough finished flat surfaces of concrete complete all as specified and directed.

M & L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers,lintels complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid seperately)

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, including and similar work;not exceeding 200mm thick (Horizontal or sloping)

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M & L for RCC type B1 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25 CM completed all as specified and directed.

Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point completed all as specified and directed.

S & F for FE 410-W (Gde-E-250) quality A joist, channel, angle or tee section fixed independently without connectiong plates etc cut to ordinary length within 20mm of the length indicated)

S & F for hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, blusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165

S&F mild steel screw bolt (machine made) with hexagonal at one ends and screwed the other ends, each screwed ends to be fitted with washer and one hexagonal nuts, size of bolt 12mm dia and length (from under side of head to the end in 75mm), complete all as specified and directed.

S & F of round bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not lesss than 0.90mm dia or securing with clips quality conforming all as specified and directed.

Supply only chain link fencing any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire.

S & F for galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to sny type of standard rails straining bolts, including securing rying at crossings with and proision of galvanised mild steel wire, staples or steel pins as directed (each line wire to be measured

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

E/M Items M&L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with PVC Box for light/fan/socket controlled by one switch complete with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed.

All as per item No 76 here-in-before but for one 5 amp socket outlet independent board complete all as specified and directed

All as per item Ser No 76 above but for one 15 amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity completed all as specified and directed.

Supply and fixing for switch socket combination multipurpose 15 amps flush type 5 in 1, 240 volts completed all as specified and directed.

Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 amps flush type 240 volts completed all as specified and directed.

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts completed all as specified and directed.

S&F for ceiliing rose three terminal surface type bakelite 65x35 mm completed all as specified and directed.

Supply & fixing LED lights fitting 1X20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by engineer-in-charge.Make Havells Cat No-LHEXBLP7PN1W020

S&F LED Bulb 9 Watt with battern holder complete all as specified and directed by the Engr-in-Charge. Make Havells, Cat No-LHEXBLP7PN1W009 or equivalent model in Philips/CG.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 250 mm all as specified and directed by engr-in-charge.

M/S ARGI ENTERPRISES

M/S RHEGON CONSTRUCTION

M/S THONGDOK ASSOCIATES

PARBIN SIDDIKI

M/S ACE BUILDERS

M/S KHANDU CONSTRUCTION

M/S L.N. TRADERS