PROVN OF PAVED AREA NEAR KSP AT COMP PL ASC AND PROVN OF SORTING OUT SHED AT COMP PL ASC AT RAYANG MIL STN UNDER GE 872 EWS

Amount

B/R SERVICES/WORKS

Surface Dressing not exc. 15 Cm deep and getting out in Soft/Loose soil, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Sand (as approved) Filling under Floors, Foundations, etc. including Spreading and Levelling, etc., complete all as specified and as directed.

M&L Hardcore broken Stone or Boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork as ordered, complete all as specified and as directed. NOTE : Cost of Formwork shall deemed to be included in the Quoted Unit Rate.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Foundation including Rafts, Footing, Foundation Beams for Column Basement Slab, under reamed Piles, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Roof Beams, Lintel Bands, Cantilevers, Bressumers, Lintels over 1.50 Metre Span, etc., complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Chajja and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 60 Cm in heights, Coping, Kneelers, Apex Stone Bed Plate, Kerbs, Water Trough, etc., weathering, slightly champhered angles and throating including Use and Waste of Formwork, complete all as specified and as directed. NOTE : Cost of Formwork shall deemed to be included in the Quoted Unit Rate.

M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams and Similar Work; Square, Rectangular or Polygonal, Vertical or to Batter, Rough Finished Surface of Concrete Flat, complete all as specified and as directed.

M&L Formwork to Sides of Pillars, Posts, Struts, Piers, Columns and Stanchions, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunchings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc, Rough Finished Surfaces of Concrete Flat, complete all as specified and as directed.

M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; not exc. 200mm thick (Horizontal or Sloping), etc., Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use & Waste of Formwork and applying Evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed.

S&F Flush Shutter 40mm thicks, Solid Core Construction with Block Board Core and Plywood Face Panels, Commercial type on Both Sides and fitted to Frame/ Chowkath, complete all as specified and as directed.

S&F Steel Windows with Side Hung Shutters including Box type Hinges with Steel Handle and Steel Peg Stay, complete with Glazing Bars, dovetalied or welded, complete all as specified and as directed.

S&F Steel Windows with Side Hung Shutters including Box type Hinges with Steel Handle and Steel Peg Stay, complete without Glazing Bars, dovetalied or welded, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt 200mm long (as approved), Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, Sliding Door Bolt 300mm long (as approved) with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 100mm in size (as approved) and fixing to Door Shutter with Chowkath or Frame, complete all as specified and as directed.

S&F Aluminium Handle 125mm (as approved), Fabricated type, anodised, complete all as specified and as directed.

S&F Floor Door Stopper (as approved) having Overall Length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor, complete all as specified and as directed.

M&L Stainless Steel Wire Cloth having 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Steel Pins/Clips in Square not exc. 0.50 Sqm in Each Pane to Steel Windows, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Rolled Mild Steel in Framed Work in Doors or Gates of Angle or other Section with Gusset Plates, Rails, Braces, etc., complete, drilled for fixing of Steel Sheeting or other Covering to Doors, etc. to be prepared for Hanging or Sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or other Covering, Running Rails and Guides) and Hanging; also fastening and fixing, complete all as specified and as directed.

M&L Mild Steel Framed Work such as Grills, Gratings, etc, with Ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars, Barred Iron Doors, Ladders, Framed Balusters, Walkways, Railings, Frame Work of Water Tanks and Similar Works, conforming to Fe-290, Gde E-165, complete all as specified and as directed.

M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for large Gates; Hook and Pintle Hinges: large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and similar small Articles conforming to Fe-290 Gde-E-165, complete all as specified and as as directed.

M&L Mild Steel Tublar Trusses, Rafter, Purlins, etc. including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed.

M&L Mild Steel Plates (Plain or Chequered) Channels, Square cut or Notched (Ordinary and Counter Sunk) forming Holes, without any Attachment, conforming to Fe-290 (Gde-E-165), complete all as specified and as directed.

M&L Mild Steel Screw Bolts (Machine made) with Hexagonal or Square Heads at One End and screwed the Other, or screwed both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, length of Bolt exc. 22.5 Cm and not exc. 30 Cm long and Diameter of Shank 16mm to 20mm, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L GI Frame Work of 605x605mm Grid for Seamless Ceiling comprising of GI Perimeter Channnel 0.55mm thick with 2 Unequal Flanges of 20mm and 30mm and Web of 27mm fixed to surrounding Wall using Nylon Sleeves and Screws at 450mm Centre to Centre, Intermediate Channel 0.9mm thick having 2 Equal Flanges of 15mm Each and Web of 45mm suspended from Soffit at approx 900mm Centre to Centre with Gl Cleat and Steel Expansion Fasteners with and including Ceiling Section (not exc 1.20 Metre length) of 0.55mm thickness having Kurled Web of 50mm and Flange of 26mm Each with Lips of 10.5mm fixed to the Intermediate Channel with Connecting Clips across the Intermediate Channel at 457mm Centre to Centre, complete all as specified and as directed.

S&F Hangers 6.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F Non-Asbestos Fibre Cement Building Boards 4.0mm thick, fixed or laid/ inserted to GI Snap Grid Framework with Screws, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, Paver Blocks, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Floors, etc., Levelling Course to laying Tiles, complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rect- angular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) conforming to IS:13755, in Floors, jointed in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deemed to be included in the Quoted Unit Rate.

M&L Non-skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rect-angular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) conforming to IS:13755, in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and pointed in Coloured Cement to match the Tile, fixing over and including Cement Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deemed to be included in the Quoted Unit Rate.

M&L Machine Pressed Pre-cast Concrete Interlocking Paver Block 60mm thick of M-35 Grade with Grey Cement and Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked, laid Dry over and including Sand Cushioning of 25mm thick and grouted with Clean dry Sand as in Floors, complete all as specified and as directed. NOTE : Cost of Sand shall deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick in Flooring, Footpath, etc., Laid in Panels, finished Concrete Surfaces Even and Smoooth without using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base to Footpath, etc., complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 150mm thick in Sub-base to Floor, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick in Footpath, etc., Laid in Panels, finished Concrete Surfaces Even and Smoooth without using Extra Cement, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick in Footpath, etc., Laid in Panels, finished Concrete Surfaces Fair and Even, complete all as specified and as directed.

M&L Forming Expansion Joints 12mm thick in 100mm thick Concrete and filled with Pre-formed Bituminous Filler and Top 30mm Primed and Sealed with Sealing Compound Grade 'A', complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick on Brick Works/ PCC Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) shall be Measured and Paid saperately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing Surfaces of HSPC Non-Asbestos Fibre Cement Building Boards on Ceiling and applying Two Coats of White Washing, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and applying a Layer of Wall Care Putty 3.0mm thick including Cutting and Rubbing down to obtain a Even and Smooth Surface, complete all as specified and as directed.

M&L Applying Two Coats of Distemper Oil Emulsion (as approved Tint) on Putty Finished Surfaces of Walls over a Coat of Chalk Whitening (Priming Coat), complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Conduit (minimum 25mm dia) with all Fitting/ Fixtures as Bend, Elbow, Joints, Socket, Saddles, Tee, etc. complete with and including Bakelite Sheet 3.0mm thick on PVC Board/ Box of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ EXHAUST FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 5 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Conduit (minimum 25mm dia) with all Fitting/ Fixtures as Bend, Elbow, Joints, Socket, Saddles, Tee, etc. complete with and including Bakelite Sheet 3.0mm thick on PVC Board/ Box of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Conduit (minimum 25mm dia) with all Fitting/ Fixtures as Bend, Elbow, Joints, Socket, Saddles, Tee, etc. complete with and including Bakelite Sheet 3.0mm thick on PVC Board/ Box of suitable size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3 PIN SOCKET OUTLET 16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Runs of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 2.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Rigid Non-metallic Conduit (minimum 25mm dia) with all Fitting/ Fixtures as Bend, Elbow, Joints, Socket, Saddles, Tee, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Rigid Non-metallic Condui shall deem to be include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Rigid Non-metallic Condui only. Wires required for looping, etc. as ordered will deemed to be included in the Quoted Unit Rate.

S&F PVC Rectangular Block of size 175x100x50mm deep, Closed recessed, with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc., complete all as specified and as directed.

S&F PVC Rectangular Block of size 250x200x50mm deep, Closed recessed, with 3.0mm thick Plastic Laminated Sheet Cover for mounting Swiches, Sockets, Fan Regulators, etc., complete all as specified and as directed.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Socket Outlet 6 Amp 2 Pin & 6 Amp 5 Pin, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6 Amp, 2-in-1, Flush type, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 6 Amp, 3 Pin & 16 Amp 3 Pin, Flush type, Multi-plug, 230 Volt AC and connecting up, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm, 3 Terminals suitable for 230 Volt AC, 6 Amp and connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Dimmer Switch type, 230 Volt AC, Rotary Stepped Electronic, 120/280 Volt including necessary Connection and connecting up, complete all as specified and as directed.

S&F Decoractive Ultra Slim Linear LED Tube Light Fitting 1x18/20 Watt, 4 Feet long with LED Tube, having housing of Extruded Aluminum Heat Sink, Energy Efficient, Environment Friendly, Pre-wired with complete Accessories and connecting up with and including suitable Size and Length Twisted Flexible Copper Conductor Cable, complete all as specified and as directed. MAKE : BAJAJ/ CG/ C&S/ HAVELLS/ PHILIPS (as approved by GE).

Supply & Hanging Ceiling Fan 5 Star rated 1200mm Sweep, 75 Watt, 50 Hz, 220/230 Volt AC, connecting with and including suitable size Copper Conductor Cable from Ceiling Rose to Connector of the Fan, complete all as specified and as directed.

M&L Exhaust Fan 300mm Sweep with Louver, Turbo Force, Heavy duty, Single Phase, 230 Volt AC, fixing with Mild Steel Bolts, Nuts, Washers, etc. and connecting up with and including suitable size Twisted Flexible Copper Conductor Cable, complete all as specified and as directed.

S&F MCB Single Pole 6 Amp to 32 Amp, 'C' Series, 50 Hz, 10 kA, 240 Volt and connecting up, complete all as specified and as directed.

S&F MCB Single Pole & Neutral 40 Amp, 'C' Series, 50 Hz, 10 kA, 240 Volt and connecting up, complete all as specified and as directed.

S&F MCB Distribution Board Sheet Metal Enclosure SPN, 12-way, 240 Volt, Double Door with Steel Phosphotised Powder painted, with 200 Amp rated Neutral Bars & Earth Bar and connecting up, complete all as specified and as directed. MAKE : HAVELLS, Cat No. DHDPSHOSRW12 or equivalent Model in Make : LEGRAND/ L&T/ SCHNEIDER (as approved by GE)

M&L Street Light Fitting Bracket made out from GI Pipe 40mm Bore (dia), Medium Grade, not exc. 1.50 Metre long, bend to required shape and fixing to Poles, etc. with and including Mild Steel Flat Iron Clamps 30x6mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including applying with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works, complete all as specified and as directed.

S&F LED Street Light Fitting 10 Watt, New Generation, Environmental Friendly, Energy Saving, Long Life, made up of Pressure Die-cast Aluminium Housing with High Power LEDs as Lighting Source and Lens embeded PC Cover having Top Opening, with separate Driver Compartment, IP-66 protected, Impact Resistance of IK-07, Providing Electric Connections, complete all as specified and as directed. MAKE : BAJAJ/ CG/ C&S/ HAVELLS/ PHILIPS

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing, complete all as specified and as directed.

Supply & Laying or Passing through Pipe 1100 Volt grade heavy duty, Cross-sectional area 16 Sqmm, 4 Core, Flat or Circular Cable with PVC insulated Aluminium Conductor served with an inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed in Service Connection suspended by insulating Hangers not more than 1.0 Metre apart including 4.0mm Suspension Wire, complete all as specified and as directed.

Supply & Laying XLPE insulated, armoured heavy duty, Electric Cable with Aluminium Conductor, 1100 Volt grade, Cross-sectional area 35 Sqmm, 3½ Core, laid in Trenches/Ducts or Passing through Pipes or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earth Works, Sand Cushioning, Cable Protection Cover & Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.

FREEZCON