Spl repair replacement of old vintage unsv street light fittings with energy saving LED street light fitting and connecting items at SBS Enclave Spl repair replacement of old vintage unsv street light fittings with new LED street light at 21 RAJ Rif

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 deep for foundations of poles/stays/cable etc. and getting out in soft/loose soil complete all as specified and directed

Returning, filling in earth including spreading levelling watering and well ramming in layers each not exceeding 25 cm thick each layer, complete all as specified and directed.

Removing of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and as directed

M & L for sand cushioning with a layer of fine sand(sand for plastering) 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and directed. Note: punned down thickness shall be measured.

Supply and laying well burnt old size sub class 'B' bricks laid flat with width equal to length of brick perpendicular to the direction of cable , adjacent/abutting each other complete all as specified and as directed in trenches for cable protection.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed.

Supply & fixing LED Street light 90 Watt made up of pressure die cast housing with toughned glass Aesthetically designed roadway luminiare with excellent thermal management IP 66 protection Make- KCSAD LED Cat Part No-KDST90 or equivalent make of Havells/Bajaj as approved .

Supply & fixing in repair 3core 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from Junction Box to street light fittings. Make : Havells/Polycab or equivalent make as approved

M&L for integral LED post top lanterns black painted cast aluminium spigot, spun, aluminium funnel with clear acrylic cover light opening on canopy with baffles and accessories including LED x 7 W lamp & connection wire 2.5 Sqmm copper conductor multi-stranded as required length complete all as specified and as directed .

Supply & fixing street light pole mounted cable junction box IP-65 of Size 250x200x105 for 3 phase /4 core made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps Made out of MS flat 40x5mm including bolts, nuts duly painted and MCB SP 6Amp etc complete all as specified & directed Including taking out Old unserviceable Junction box and connected item Make : Sintex CAT part No GS-JB-2520 or other equivalant makes as approved by GE.

M&L painting to steel tubular pole of any size with two coats aluminium paint over a coat of red oxide primer including preparation of old painted surface complete all as specified and as directed

M&L for boring of holes under road, pavement, hard standing for laying pipe for crossing cable including getting out, disposal of rubbish off to a distance upto 50 Mtrs including 50 mm GI pipe medium grade complete all as specified and directed

M&L for earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate. complete all as specified and shown on electrical plate No 3 on SSR Part-I

Dismantling and taking down old wornt out ACSR conductor of any type and size (Street light feeder) complete all as specified and directed.

S&F GI Bracket for street light fitting bend to shape made out of GI pipe light grade 40mm bore upto 1.2 mtr long duly painted with Two coat of aluminum etc complete with Two sets MS clamps of MS flat of size 40X5mm thickness with nuts/bolts/wasters for fixing arrangement of bldg or pole complete all as specified and directed

Supply and fixing automatic street light switch for automatic swithcing of street light/high mast light (timer switch) based on lux level of natural light. The sensor alongwith suitable power contractor as per IEC - 60947-4-4 , MCB and support terminal and enclosed in pole/wall mounted factory made PVC enclosure made out of rust , shock, termite proof and FR grade confirming to IP 65 of capacity 5 KW , Three phase , 415 V of Make- Kaktiya Energy system (Model No 02EC 5KW3P swadeep or equivalent model of /bajaj/Havells as approved by GE)

Supply, laying and testing cable XLPE insulated,screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core Including taking out Old unserviceable Junction box and connected item

S&F GI tubes, light grade 40 mm for cable protection bend to shape with Two sets MS clamps of MS flat of size 40X5mm thickness with nuts/bolts/wasters for fixing arrangement of bldg or pole complete all as specified and directed

Disconnecting and taking down fluorescent street light fitting from LT pole upto 9 mtr height complete all as specified and directed.

Harmesh Kumar Sharma and Sons

M/S B H Contractor

GS and Co

AKASH ELECTRICALS

HAPPY ELECTRICALS

M/s Surjit Singh and bros

Vee Vee Enterprises

JAWAHAR CONSTRUCTION COMPANY

CHETAK CONSTRUCTION COMPANY