REPAIRS TO MISC BR ITEMS JOINERY FLOORING SANITARY FITTINGS AND PLINTH PROTECTION ERTC FOR MD ACCN OF NP GNC MC AND RHM LINES

Amount

Dismantling of corrugated or semy corugated AC sheet in Roof covering / Wall cladding including Ridges.

Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Demolition of Cement Concrete n.exc. 15cm thick but above ground level (Any type of flooring)and and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Demolition of Cement Concrete exc 15cm thick but above ground level (Any type of flooring)and and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Removing existing water proofing treatment of any type all as directed by Engineer-in-charge and disposing off out side of MD land.

Demolition of brick work or stone boulder masonry,built in cement mortar including all quoins,arches,pillars,etc,complete all as specified and directed.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Demolition and breaking up drain pipes of 100/75 mm dia(salt glazed ware,AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Dismntling 500 lit water tanks,open or closed,hoisted and fixed in position complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed.

Dismantling structural steel work including doors,gates,grills but excluding framed truss etc…. Complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 Sqm (with out taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm and n.exc 4 sqm (with out taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down & refixing in same opening shutters of any description exc 1 sq. m and n exc 2 sq. m each including adjusting and ezeyingcomplete all as specified and directed.

M&L of 6mm thick AC corrugated sheet in roof / Wall Clading fixed with "L" or "J" hook or cranked hook bolts etc. complete.

M&L of 6mm thick AC One Piece Plain Angular Ridge fixed with "L" or "J" hook or cranked bolts etc. complete.

fixing only AC corrugated sheet in roof / Wall Clading fixed with new "L" or "J" hook or cranked hook bolts etc. complete. Note: The serviceable sheets reterived from item No 1 Shall be re used.

M&L for 25 mm thick cement concrete type B0 1:2:4 is used for levelling course for flooring complete all as specified and directed.

M&L Coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc,set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over 15mm thick screed bed in CM (1:6).

M&L Glazed Ceramic Coloured joint free tiles 350x250x 7mm/450x350x7 mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4.

M&L for 40 mm Cement Concrete type B1 1:2:4 is used for flooring (20 mm graded stone aggregate) fininshing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete Type E2 1:5:10 (40 mm graded stone aggregate) in foundation filling ,sunken repairing and mass concrete complete all as specified and direceted.

M&L for bitumen blown any grade,applied hot,two coats,to concrete surfaces at the rate of 1.5 Kg per Sqm per coat complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate finished even and smooth without using extra cement of 75mm thick as in Plinth Protection complete all as specified and directed.

M&L for 20 mm granite in steps,jambs,pillars,window cills,cooking platforms and the like over 20 mm thick screed bed including pointing in white cement using marbile dust with admixture of pigment to match with shade of granite and rounding of the edges complete all as specified and directed.

M&L for cement concrete Type B0 1:2:4 (12.5 mm graded stone aggregate) in roofs,kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 mixed with water proofing compound by weight of cement as per manufactureres instructions finished even & smooth without using extra cement on roof/floor. Note: WPC shall be measure and paid seperatly under supply only item.

Supply only water proofing compound

M&L for Applying oil bound bitumen primer @ 0.20 kg/sqm and providing 3mm thick APP modified water proofing membrane weighting not less than 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 150mm centigrade, having tensile strength of 650 N/sqcm and 350 N/sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlapping and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the mebrance @ 1.2 kg/sqm top of membrane surface shall then be finished with solar reflective bituminous aluminium paint @ 0.10 kg/sqm complete all as per manufacturer instructions and as directed by Engineer-in-Charge over roof and wall surfaces.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified and directed.

M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 mixed with WPC by weight of cement as per manufacturers instructions finished even & smooth without using extra cement complete all as specified and directed. Note : WPC mesured and paid seperatly

M&L Rendering 15mm thick in CM 1:6. finished even & smooth without using extra cement to walls all as specified and directed.

M&L Rendering 5mm thick in CM 1:3 finished even & smooth without using extra cement in ceiling

M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of cement base paint over one coat of primer all as specified and directed.

M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of oil bound distember over 1 to 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of Newly Plastered surfaces of ceiling and applying Three coats of white wash all as specified and directed.

M&L for 75 mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed type 'B' in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed type 'B' in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm with access door complete all as specified and directed.

S&F PVC (SWR) bends 75 mm with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(single T) 110 mm with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(single T) 75 mm with access door complete all as specified and directed.

S&F PVC (SWR) 75 mm branch piece type 'B' single (Single Y) equal or unequal with access door complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia float valve and HDPE 25 mm water tank nipple complete all as specified and directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in Repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot restS or P trap etc. including 10 ltr capacity low level PVC Flushing cistern,PVC connection 15 mm size 450 mm long and flush pipe, S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge.

S&F in Repair Vitreous China Wash hand basin , white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & 32 mm dia LDPE PVC waste pipe) including PVC connection 15 mm size 450 mm long complete all as specified & directed by Engineer-in-charge.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

S&F in repair 15 mm bore bib taps cast copper alloy with crutch or butterfly handle,screwed down fancy type complete all as specified and directed

S&F in repair 15 mm bore stop valves cast copper alloy with crutch or butterfly handle,screwed down fancy type complete all as specified and directed

S&F in repair 15 mm bore stop valves cast copper alloy chromium plated with capston head,screwed down fancy type with long shank and cup complete all as specified and directed

S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats. (Minimum weight 190gms)

S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) & Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F in repair steel chromium plated soap dish,any type,fixed to plugs with chromium plated with brass screws complete all as specified and directed.

S&F in repair metalic coated curtain bracket 25 mm dia including wooden support complete all as specified and directed.

S&F in repair 25 mm dia metalic coated curtain rod complete all as specified and directed

M&L Second class Hard Wood Plain, Solid, Straight chowkats and frames, framed, rebated on the solid, put together with glue , pinned at joints.

S&F Second class hardwood 35 mm thick glazed and skeleton shutters divided into squares open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a)

S&F Second class hardwood 30 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b)

S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side including liping beading all round as in Door Shutter,Cup board shutter & Kitchen rack all as specified in SSR Part I, Section 8, clause 8.25

S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed.

S&F 4mm thick Sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 SqM in each pane

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 4mm thick figured glass,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron)

S&F powder coated aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,locks handles etc. complete all as specified (minimum thickness of powder coating 50 micron)

S&F miled steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preperation of new steel surfaces and applayingtwo coat of synthetic enamel paint over a coat of red oxide,zinc chrome primer all as specified.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm Butt hinges , medium weight, cold rolled, mild steel complete all as specified and directed.

M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

M&L Plain Cement Concrete 1:3:6, type C1, using 20mm graded stone aggregate as in hold fast blocks complete all as specified and directed.

S&F Mild steel small articles conforming to Fe-290-0 grade-E-165. such as in hold fasts

Srisrinivasaenterprises