Supplying and Erection of New cylindrical type chimney and Maintance of Existing Crematorium at koladi in ward no.4

Amount

Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Upto Basement

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Painting two coats of newly plastered wall surface with approved cement paint over cement plastered wall surface, ceiling and including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Removal of Existing damaged chimney 70 feet full height , one set of detachable platform, over all size:800mm dia x 400mm dia x21000mm length with necessary all arrangements etc., complete.

Guy supported chimney: This is a cylindrical type MS IS -2062 quality,BMM plate chimney with two coasted of aluminium heat resistance paint externally,7000mm long bottom cylindrical chimney.It is rested on 16mm type MS IS -2062 quality (100 feet thick base flange and stool flane 16mm thk with 12mm gusset support , cylindrical chimney mounted on founadtion 12nosx25mm dia bolt,nut joints, Top 1 cylindrical shell boiler quality 800 plate x 7000mm long base chimney. It is rested 50mm widht base flange & wind force curtain MS flat set ,eith lightening arrestor 25mmx3mm copper flat earthing,with easy hinges type manual opened manhole door, necessary for pollution control board monitoring sample ports arrangements ladder assembly with safety guard set 70 feet full height , one set of detachable platform, over all size:800mm dia x 400mm dia x21000mm length with necessary all arrangements etc., complete.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc ( SOR-2025 pg-82)

The Existing Main Door of the Cremation Chamber fully Jammed condition to be Serviced with replacement of New Bearings

YES YES ENGINEERING (BID ID -1248517)