SPECIAL REPAIR OF GOVT MD ACCN BLOCK NO P-30 (1 TO 5) AT GOVIND SINGH ENCLAVE AT 401 FD HOSP AND PROVN OF PATHWAY AT 42 MED REGT UNDER GE (N) PATIALA

Amount

Taking down cement plaster on brick walls built in cement mortar including raking out joints and concrete surfaces as in wall or ceiling etc. including hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L Rendering 15mm thick on brick or concrete surface in Cement mortar 1:4, finishing surface w/o using extra Cement, mixed with integral liquid water proofing compound complete all as directed and specified. NOTE : WPC shall be measured and paid separately.

Supply only integral water proofing compound.

M & L 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal/ external surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.

Applying 02 coats of exterior weather emulsion paint to external walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer and over 1.5 to 2.5mm thick wall care putty complete all as specified and directed.

Applying 02 coats of oil bound distemper to wall surfaces over & including a coat of interior wall primer and including and over 1.5 to 2.5mm thick wall care putty complete all as specified and directed.

Preparation of surfaces and applying 02 coats of oil bound distemper to ceiling surfaces over & including a coat of interior primer on ceiling surfaces and over 1.5 to 2.5mm thick wall care putty complete all as specified and directed.

Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed.

M&L 50mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & fair without using extra cement complete all as specified and directed .

M&L 25mm thick, PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate), as in floor, sub base finished fair & even without using extra cement complete all as specified and directed .

M&L 75mm thick, PCC 1:3:6, type C-2 (using 40mm graded stone aggregate), as in sub base complete all as specified and directed .

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tile to store and rubbish off the premises.

M&L for single charge, Ceramic, stain & scratch resistant, joint free, premium quality coloured tiles exc 0.16 sqm and n.exc 0.36 sqm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles exc 0.11 sqm but n.exc 0.18 sqm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 20 mm thick including bull-nose the front length, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

Machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry including border of 100mm wide baroda green/white marble as per pattern approved over & including screed of 20-22 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified

Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, column or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrete block strecthner with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with 10mm thick plastering in CM 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Taking down chowkhats or frames of any description exc 1.5 Sqm and n. exc. 4 sqm each (without taking off shutters from the frame) including cutting hole to size for receive fresh PCC of hold fast and making good the disturbed surface same complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., of size 125x60mm complete all as specified and directed.

S&F factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters incl two coat of synthetic enamel painting over a coat of pink primer complete all as specified and incl supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm) incl two coat of synthetic enamel painting over a coat of pink primer complete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F Powder coated (Minimum thickness of powder coating 50 micron) anodised aluminium frame /shutters for doors ,windows,ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge.

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 200mm long complete all as specified and directed.

S&F stainless steel (304 grade) finished butt hinges 100mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed.

S&F powder coated aluminium handles 150mm complete all as specified and directed.

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters complete all as specified and directed.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and 1.40mm avg width of aperture complete all as specified and directed.

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore.

S & F Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

All as per Serial Item No. 39 above here-in-before but except water tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item after cleaning).

Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore.

S& F Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

All as per Serial Item No. 42 above here-in-before but except water tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item after cleaning).

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed.

M&L for Vitreous china squatting pan of Orissa patten size 580 x 440 white with (C I 'P' trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.

S&F Stainless steel plate rack made out of 1 mm thick stainless steel sheet of size 900x750x250mm complete all as specified and directed.

S&F single liver basin mixer with popup waste system and 450 mm long braided hoses, fancy type, cast copper alloy, with capston head chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts screwed for 15 mm bore of iron pipe complete all as specified and directed by Engineer in Charge.

S&F single lever Sink mixer with swinging spout with connecting legs and wall flanges, wall mounted fency type chromium plated cast copper alloy screwed down high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engineer in Charge.

S&F wall mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlet for hot and cold water with connecting legs and wall flange fancy type suitable for 15 mm tubing fixed in position complete all as specified and as per sample.

Supply and fixing in repairs 15mm bore C P Angle cock (weight not less than as specified in SSR) complete all as specified and directed.

S&F Towel rail 600mm long brass chromium plated fancy type, fixed as in repair complete all as specified and directed.

S&F Brass chromium plated shower roses 125mm size with swivel joint and with shower arm any size fixing in repairs all as directed and specified.

S&F 450mm long PVC connection of approved quality with brass check nuts at both ends for 15mm bore pipe complete all as specified and directed.

S&F Bib tap cast copper alloy chromium plated, fancy type long body, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe after taking down of old brass bib tap complete all as specified.

S&F Rotational moulded polythene water storage tanks, double layered (Cylindrical vertical with closed top) of capacity 500 ltrs, hoisted and fixed in position as in repair and taking down old one complete all as specified.

S & F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed.

M&L 20mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for cast iron multifloor trap / nahni trap 100 mm dia and 450mm long including jointing with solvent cement fixed in repair complete all as specified and directed by Engineer in Charge.

S&F for Cast Iron gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' including CI grating fixed in repair complete all as specified and directed.

Supply and fixing in repairs MS powder coated peg set of Six complete all as specified and directed.

S&F in repairs stainless steel soap dish approx size 100x80mm fixed to walls of approved make complete all as specified.

S&F in repairs stainless steel grating with anti-foul self closing cockroach trap of 100 mm dia for floor/nahni traps complete all as specified.

S&F cast iron spun pipes soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 100 mm bore including stack clamps, nut bolts etc. and making necessary connections, fixed in repairs complete all as specified and directed by Engineer in Charge..

S&F cast iron spun pipes soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 75mm bore in and including stack clamps, nut bolts etc. and making necessary connections, fixed in repairs complete all as specified and directed by Engineer in Charge..

S&F 100mm bore cast iron spun pipes soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore cast iron spun pipes soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F CI bend (any radius) of 100 mm bore in repair complete all as specified and directed.

S&F CI bend (any radius) of 75 mm bore in repair complete all as specified and directed.

BLANK

S&F CI cowl 100 mm dia. complete all as specified and directed.

Taking down eaves, gutters and rain water pipes (any sizes or pattern) incl all fitting incl cleaning for refixing or removing to store yard complete all as specified and directed.

S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts, washers, nuts, nails etc, after taking down existing damaged rain water pipe complete all as specified and directed.

S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction laid in trenches or floor and making good the disturbed portion to match with surrounding area complete all as specified and directed by Engineer in Charge.

S&F PVC(SWR) bends for 150mm dia rain water pipes with rubber ring joints complete all as specified and directed

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish with wooden beading & applying three coats of french polishd over one coat of primer on wooden beading etc. complete fixed in position all as specified and directed.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud in roofs any thickness including plastering and leaping complete all as specified and directed.

Scarping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed.

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregates as in padding over roof, minimum thickenss at khurra as 25 mm to maintain a slope of 1:100, complete all as specified and directed.

M & L for Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.

S&F factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mm x 22mm, machine pressed, as on roof surface, confirming to IS 1237-1980, laid over and including 15mm thick screed bed in CM 1:4 incl mixed with WPC (Water proofing compound shall be paid separately), set jointed and pointed with grey cement slurry complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M& L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed.

Demolition of brick work including all quoins arches pillars etc built in cement mortar complete all as specified & directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean radius complete all as specified & directed.

S&F framed work of grade Fe 410-W (Gde E-250) quality A as in doors or gates of angle or cooler stand or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed

M&L for ACP sheet of 4mm thickness of approved plain colour/shade for chajjas/sun-shades/cladding and the like works etc. fixed to frame work of MS/aluminium/hollow sections of any size description including finishing all the joints with silicon or as per manufacturer's instructions complete in all respect and complete fixed in position incl scaffolding/ladders etc as required and also making the joint between wall and chajjas/sun-shade water proof complete all as specified & directed. Note : Frame Work shall be measured and paid separately.

S&F MS hollow rectangular/square tubes/pipes of YST 310 Grade as in frame work for roofs/sheds/chajjas etc and like similar items including welding/fixed with conn plates etc. including one coat of red oxide zinc chrome primer complete all as specified & directed

S&F framed work such as grills, gratings, etc, with ends of bars shoulderd and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290 complete all as specified & directed

M & L for Preparing new surface of steel material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified & directed

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtr wide and not exceeding 1.50 Mtr in depth and getting out in soft/loose soil complete all as specified and directed Engineer-in-Charge

Demolition by breaking up drain pipes salt glazed stone ware pipe, AC or reinforced concrete of internal dia 100/150/200/300 mm dia jointed in cement mortar and taking out of from trenches removing the debries from site complete all as specified and directed by Engineer-in-Charge

M&L Reinforced concrete pipes of 150mm dia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

M&L for concrete bed type D-2 1:4:8 using 40mm stone agg) to drain pipes of 150mm dia complete all as specified and directed

M&L PCC (1:4:8) type D-2 (using 40mm graded mechanically crushed stone aggregate) as in foundation of manholes complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed

M&L RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast slabs for covers of manholes and set in CM 1:6 incl necessary from work hand placing of manhole cover on varsion complete all as specified and directed by Engineer-in-Charge. Note : Contractor to meniton month and year of casting to be engraved on each MH covers. No extra cost to be paid for this the same will be included in this item.

M&L TMT bars 8mm dia and over cut to length bent to shape required incl cranking bending, spirally , hooking ends and binding with mild steel wire not less than 0.9mm dia (annealed) complete all as specified and as directed by Engineer-in-Charge. (Note : The payment shall be made only after placing of cover on manholes)

Returning and filling incl spreading, levelling, water and well ramming in layers not exceeding 25cm thick complete all as specified and directed Engr-in-charge

Removal of excavated material n. exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified & directed

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and formingbranch channel (1/2 round or 3/4section) in cement concrete 1:2:4 mix type B-1smooth finished and reforming benching as required of any size of dia of pipe complete all as specified & directed

M&L Cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as in benching of manholes coping, plinth course, bands, stops, bed plates etc incl necessary form works complete all specified and directed by Engineer-in-Charges

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

BLANK

BLANK

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified & directed

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB/ Aluminium door etc. complete all as specified.

M&L for rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor/path complete all as specified and directed.

M&L 20 mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

M&L 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete Type C2 (1:3:6) 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block of any shpe and size made of M-40 grade concrete with grey cement and pigment) of 80mm thickness conforming to IS 15658-2006 including filling of interstices with fine sand laid over and including 25 mm thick (compacted) fine sieved sand cushioning complete all as sepcified and diected.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLS single core multi-stranded copper conductor for one light/fan and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring) Make of Wire: Havells/Finolex/Polycab

One light/fan point controlled by one switch 6 amp one way

All as described above in item no 127 but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

All as per Sl item No 127 above herein before but one 5Amp socket point on same board but with other switches complete all as specified and directed.

All as per Sl item No 127 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

M&L modular switch 1 way 6 A, 1 module complete all as specified and directed.

M&L modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed.

M&L modular switch 16 Amps, 1 module with indicator complete all as specified and directed.

M&L modular socket 16 Amps, 6 pin, 2 module complete all as specified and directed.

S & F fan regulator modular type 2 module complete all as specified and directed

S/fix ceiling rose 65x17mm three terminals complete all as specified and directed

S& F Modular Bell switch 1 way, 6 Amps, 1 module complete all as specified and directed

Suppy and fix bell ding dong type AC 230 volts complete all as specified and directed.

S&F Lamp holder ,PVC/polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S&F LED bulb 9 watt complete all as specified and directed

M&L for highly efficient LED building/security light 25 watt luminaries new generation energy saving & environment friendly with lens made of pressure die cast aluminium alloy housing LM24 for gear and exturded alluminium lamp housing & enclouser with toughened glass with IP-66 of protection class,with high power LEDs as light source having luminous efficiency should be > 80Lm/w with active power factor correction (APFC) electronic gear (Heat shrink for better heat transmission) . It shall have epoxy powder coated grey finish phosphochromate treatment and operating voltage range should be fron 120 volt to 270 volt AC and frequency range 50Hz and suitable for an ambient temparature from -40°C to 50 °C and humidity level 10% to 90% including connection with PVC unsheathed wire aluminium conductor 3 x 1.5sqmm fitted on pole/building with GI bracket of suitable size including taking down of u/s light fitting of any type/size complete all as specified and directed Engr-in-Charge.

supply and fix tube light fitting 20 Watt 4 Feet long LED type complete all as specified and directed

supply and fix tube light fitting 10 Watt 2 Feet long LED type complete all as specified and directed

Supply and fix 1 X 10 Watt LED bulkhead lumanries polycarbonate body heat resistant prismatic glass cover speicfically designed gasket fitting complete all as specified and directed

S/Fix MCB DB TPN 4 Way vertical tupe factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including one MCCB upto 125A after dismantling old one all wire and cable connections must be done wih proper copper thimbles.all as directed by Engr-in-Charge.

S&F MCCB 100 Amp 16 Ka for fixing in DB all as directed by Engr-in-Charge

S&F Single pole & neutral 8 way door closer DB with 125 amps rated bus bar all wire and cable connections must be done wih proper copper thimbles.compelete all as specified and as directed.

S&F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB . (DB will be measured and paid separately under respective items of sch A):-

(a) MCB SPN 40 Amps.

(b) MCB SP 6 to 32 Amps

(c) MCB SP 40 to 63 Amps

Supply and fixing earth metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp concealed in wall complete all as specified and directed

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through metallic concealed conduit 25 mm dia incl 4.0 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire all as specified and directed.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note1: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.Note2 : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

supply and fixing exhaust fan 300mm,single phase ac 220 V compelete all as specified and as directed.

Taking down and refixing of 1200 mm ceiling fans after cleaning including replacemment of down rod of suitable size complete all as specified and directed

Taking down LED tube light fitting 18/20watt hand over to MES STORE and refixing after necessary cleaning complete all as specified and directed.

Taking down old U/S Exhaust fan and hand over to MES STORE complete all as specified and directed

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

M&L for providing river sand as in sand cushioning to under ground cable including punning down of sand in layers as specified and as directed. Note: Punning down thickness of sand shall be measured for payment.

supply and laying un-reinforced precast concrete cable cover class LV, Type 2, with peak size 300mmx180mmx40mm. complete all as specified and directed by Engr-in-charge.

M&L for making bore below the road for crossing the GI pipe light grade 50 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed by Engr-in-charge.

M&L for galvanized steel tubing 50 mm light grade (ISI marked) inreplacement of old damaged steel GI pipe for protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Supply , laying , jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 Sq mm 4 Core with aluminum thimble of same size complete all as directed.

ANIL KUMAR AND CO

KK BUILDERS

AR CONSTRUCTIONS

Buttar Construction Co.

DELTA CONSTRUCTION CO

FAVOURITE ENGINEERS