GE/U(N)-30/2024-25 REPAIR/REPLACEMENT OF CERTAIN B/R AND E/M ITEMS AT MEDICAL COMPLEX AND ADJOINING AREA UNDER AGE BR-I OF GE (N) UDHAMPUR

Amount

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside MD land all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including removal of debris outside MD land etc complete all as specified and directed by Engr-in-Charge.

Demolition Stone slabs and tiles laid dry or dry bedded or pointed of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing and rubbish off the premises outside MD land complete all as specified and directed by Engr-in-Charge.

M&L Virified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like one piece full in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Coloured glazed ceramic coloured tiles 350X250X7/ mm x 450X350X7 mm on vertical surfaces of walls as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and fair to receive tiles as in skirting/dado etc complete all as specified and directed by Engr-in-Charge.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exceeding .11sqm but n. exc .18sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L Non-skid colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for vitrified tiles light shade 10mm thick (square) polished , light shade, area of each tiles exc 0.64 sqm but n.exc 1.00Sq.m in floor etc, set and jointed and laid and pointed in colour tile grout incl 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge

M&L Brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified.

All as per item No 11 herein before, but except bricks using existing bricks including cleaning etc .complete all as specified and directed by the Engr-in-charge. Note-Old bricks obtained against dismantling/demolition shall be used after properly cleaning.

M&L 10 mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing even and smooth without extra cement all as specified

M&L 15 mm thick rendering into two layers consisting 10 mm thick in CM 1:4 followed by 5 mm thick in CM 1:4 with WPC on fair faces of brick work or concrete surface including finished even and fair all as specified. (Note WPC shall be measured and paid separately)

M&L for rendering 5mm thick on ceiling surfaces in CM 1:3, complete all as specified.

M&L for Walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified.

M&L for Walling of random rubble masonry (Except Stone), uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified. Note: Serviceable quantity of stone obtained from sl item no 5 above shall be reused under this item.

M&L rendering 15mm thick in CM 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing

M&L Preparation of new plastered surfaces of ceiling and applying three coat of white wash , complete all as specified and directed by Engr-in Charge .

M&L Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over one coat of primer & 1mm thick wall putty , complete all as specified and directed by Engr-in Charge.

M&L Preparation of new plastered surfaces of wall and applying two coat of cement base paint over one coat of primer , complete all as specified and directed by Engr-in Charge .

M&L for demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed by the Engr-in-charge.

M&L for Providing plain cement concrete 1:2:4 type B-1 (Using 20 mm graded crushed stone aggregate) as in coping, etc including necessary formwork as required complete all as specified and as directed by the Engr-in-charge.

M&L RCC Nominal Mix 20mm graded aggregate (1:2:4) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified.

S&F Sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets size 25x25x4mm thick and connecting union to pipe, and 125mm Sink Coupling with PVC waste pipe as size required & overall size 915mm x 460mm bowl size 410mm x 330mmx160 mm.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engr-in-Charge.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L 25 mm thick, Plain cement concrete 1:2:4 type B-1 using 20mmmm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for water proofing treatment to the sunken portion area of each sunken portion with removing of exiting treatment with demolition of existing floor any type up to depth nexc 0.6m including filling of floor with PCC (1:4:8) using 40mm graded aggregate WC & P/S trap and cleaning with wire brush , one coat of bitumen @ 1.7 Kg per sqm , 15mm th plaster in CM 1:4 on all sides portion, one 450mm long 32 mm dia spout .water proofing powder3% mixed by weight of cement. complete all as specified and directed by Engr-in-Charge.

S&F in replacement WC (Squatt pattern ) including cement concrete bedding , size 580 x 440mm including PVC 'P or s trap front and back inlet and with internal foot rests (excluding flushing cistern ) including flush pipe and connector pieces of PVC and removed old CI Pipe including demolition of PCC upto 450mm depth complete all as specified and directed by Engr-in-Charge.

S&F in replacement wash basins, vitreous china(flat back or angle back type) size 550 X 400mm,with pedestalheight 800mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling 32mm and PVC waste pipe 32mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, complete all as specified for modular kitchen.

S&F in repair stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen, complete all as directed by Engr-in-Charge for modular kitchen.

S&F in repairs telescopic drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electro galvanised, for modular kitchen, complete all as specified for modular kitchen.

S&F continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open.

S&F in replacement Wash down water closet (Pedestal pattern), complete with Pedestal pan and P trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including PVC Seat and cover for pedestal pan and CP Jet alongwith flexible tube/pipe complete all as specified and directed by Engr-in-Charge.

S&F in replacement PVC low level flushing cistern of capacity 10 ltr. white with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes complete all as specified and directed by Engr-in-Charge.

S&F Toughened glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes with all fitting required to hang door except floor spring.

S&F in replacement for Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe) but including urinal spreader with PVC connection 15mm size with PTMT nuts of length 450mm and PVC waste pipe of 32mm bore and CP waste Coupling complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm. complete all as specified and directed by Engr-in-Charge.

S&F in replacement for chromium plated, 15mm Swan Neck pillar cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs Health faucet CP Brass with 8mm dia,1 mtr long flexible tube with wall hook complete all as specified and directed by Engr-in-Charge.

S&F jets of EWC's with required size of jet pipe (flexible) and connections etc complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or removal to store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints fixed to walls/floor with stack clamps and fixed with nut and bolts complete all as specified.

S&F PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed to walls/floor with stack clamps and fixed with nut and bolts complete all as specified.

S&F PVC (SWR) bends with access door any radius of bore 110 mm complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends with access door any radius of bore 75 mm complete all as specified and directed by Engr-in-Charge.

PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 110mm

PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 75mm

Dismantling water tanks and removing to store exc 250 litre but n exc 500 litre with all necessary fittings complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store exc 500 litre but n exc 1000 litre with all necessary fittings complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks and removing to store exc 1000 litre but n exc 2000 litre with all necessary fittings complete all as specified.

S&F rotational moulded (3 layered as per IS 12701) polyethylene water storage tanks 500 ltr Capacity (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and connecting pipes all as specified in SSR Part I complete all as specified & as directed.

S&F rotational moulded (3 layered as per IS 12701) polyethylene water storage tanks1000 ltr Capacity (Cylindrical vertical with closed top), hoisted and fixed in position including tank Nipple inlet and outlet and connecting pipes all as specified in SSR Part I complete all as specified & as directed.

S&F Rotational moulded (3 layered as per IS 12701) polythylene water storage tank cylindrical vertical with closed top hoisted capacity upto 2000 ltrs ISI marked with valid CML No and fixed in position all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site to store bore of pipe 15mm complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site to store bore of pipe 20mm complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal from site to store bore of pipe 25mm complete all as specified and directed by Engr-in-Charge.

S&F tubes , medium grade of bore size 15 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

S&F tubes , medium grade of bore size 20 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

S&F tubes , medium grade of bore size 25 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.

S&F in replacement bib taps long body 15mm chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/socket etc as required at site complete all as specified and directed by the Engr-in-charge.

S&F in repair CP shower with arm 15mm size 195mm long with bend of 45 degree with flange including taking down the existing UNSV shower of any type/shape complete all as specified and directed by the Engr-in-charge.

S&F in replacement angle cock 15mm chromium plated fitting as required at site and taking down existing unserviceable angle cock complete all as specified and directed by the Engr-in-charge.

S&F in replacement stop valve Concealed type long shank chromium plated brass fancy screwed down high pressure with crutch or butterfly handle dia 15mm screwed both ends for iron pipe or for unions and fixed including fittings as required at site, complete all as specified and directed by the Engr-in-charge.

S&F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed by the Engr-in-charge.

S&F looking Mirror of size 600mm X 450mm X 5mm thick with Ply wood commercial type fixed on back side and wooden frame compete all as specified.

Taking down chowkats or frames of any type or description (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge.

Taking down and Re-fixing in same opening of wooden/PVC shutters of any description after easing/cutting as per requirement exc 1.0 sqm but n.exc 2.0 sqm each shutter complete all as specified and directed by the Engr-in-charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per complete all as specified and directed by the Engr-in-charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by the Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins complete all as specified and directed by the Engr-in-charge.

S&F 3.00 mm thick plain/pin headed/frosted sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by the Engr-in-charge.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to wooden or steel door/window including wooden beading/nuts&bolts complete all as specified and directed by the Engr-in-charge.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by the Engr-in-charge.

S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed by the Engr-in-charge.

S&F 100mm long Steel Butt hinges, heavy weight, cold rolled and fixed complete all as specified and directed by the Engr-in-charge.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the Engr-in-charge.

S&F floor door stopper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by the Engr-in-charge.

S&F MS helical door spring 300mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed by the Engr-in-charge.

Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge.

S&F pressed steel frames, size 125 mm X 60 mm, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 1:2:4, type B-O using 12.5 mm graded crushed stone aggregates filling inside hollow section etc complete all as specified and directed by the Engr-in-Charge.

S&F Plain, framed, panelled shutters II class hard wood 30mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face sanmika (pattern and design directed by Engr-in-Chatge) with lipping/frame to match and polished on sides of shutters complete all as specified and directed by the Engr-in-charge.

S&F 35 mm thick 2nd class hard wood glazed and skeleton factory made shutters open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters complete all as specified and directed by the Engr-in-charge.

S&F 18/19 mm thick prelaminated MDF board, for cupboard shutters and shelves solid core construction, complete all as specified and directed by the Engr-in-charge.

S&F Mortice lock with two lever Mild Steel body (vertical type) 100mm length of latch with 3 set of keys fixed in door shutter with proper in position complete all as specified and directed by the Engr-in-charge.

S&F powder coated (of approved colour) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face)complete all as specified and directed by the Engr-in-charge.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-charge.

S&F 5mm thick frosted/tinted sheet glass fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and directed by the Engr-in-charge.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by the Engr-in-charge.

S&F top counter wash basins, (size 550X400X140 / design decided by GE) vitreous china fixed over granite slab/RCC slab including CP waste coupling 32mm and CP brass Bottle trap 32mm bore including 32mm HDPE pipe bend fixed to wall etc as in waste pipe and 300mm long complete all as specified and directed by the Engr-in-charge.

M&L preparing painting on steel surfaces of any description over 10cm in width or girth, on new surface over a coat of red oxide zin primer and two coat of synthetic enameled paint over it.

M&L preparing painting on wooden surfaces of any description over 10cm in width or girth, on new surface over a coat of pink primer and two coat of synthetic enameled paint over it.

M&L for water proofing roof treatment, consists of a Atactic polypropylene modified polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming @ 0.40 lit/Sqm the surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at top and bottom of the membrane as bonding material, including sealing all joints by thermo fusion, complete including removal of existing treatment all as per manufacturer's instructions.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

Supply only integral water proofing compound

M&L for rendering 15 mm thick in cement mortor 1:3 with water proofing compound on fair faces of brick work or concrete surfaces on top of roof surface up to G+3 building complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20mm thick over 15 mm thick cement screed in CM 1:4 base and 15-16mm thick and 80mm wide white marble stone border along to wall laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per specified and directed.

Machine cut Kota stone slab 20-25mm thick in riser with bull nose, skirting, dado and pillar laid over 15 mm thick cement screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting, rounding edging, and polishing complete as per specified and directed.

Taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr-in-charge. Note : (i) Old dismantled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.

Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as, LED bulk head fitting, LED tube light fitting etc. for re use at site or carrying to the store (serviceable fitting shall be reuse) all as specified and as directed by Engr-in-Charge.

Taking down Old Serviceable/unserviceable MCB DB any type/size etc after disconnecting (serviceable DBs /MCBs shall be reuse), complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring for One light point controlled by one one way switch 5 Amp with 1.5 Sqm single core multi standed copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 20mm dia and1.5mm wall thickness ISI marked terminated into annealed steel terminal boxes including 3.00 mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed by the Engr-in-charge.

M&L for point wiring with 1.5 Sq. mm PVC Insulated unsheathed FRLS multistranded copper conductor, medium grade ISI marked drawn into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drawn in to and including surface PVC rigid non metalic conduit for one ceiling fan point controlled by one switch with and also including 1.5 sqm continuous earth wire connected to common earth dolly complete all as specified and directed by Engr-in-charge.

All as per item No. 111 above but for bell / buzzer on independent board controlled by one push button bell switch.

All as per item Srl No. 111 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.

All as per item No. 111 above but for one 5 Amps socket outlet on independent board.

All as per item No. 111 above but wire size 2x2.5 Sqm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLS 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqm.

All as per item No. 111 above but controle by 2 Nos.of two way switch.

M&L Point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqm drawn in and incl PVC casing and caping /PVC conduit with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan/controlled by one switch with thickness not less than 1.25mm annealed steel boxes concealed on wall with and including 3mm thick laminated backlite sheet complete all as directed by Engineer-in-charge.

All as per item No 118 above but for two way point wiring

All as per item No 118 above but for one 3/5 pin socket 5 Amp on same board with cable1.5 sqm size.

All as per item No 118 above but for one 3/5 pin socket 5 Amp on independent board with cable1.5 sqm size.

All as per item No 118 above but for 3/5 pins socket outlet 15 Amps independent with 2.5 sqm incl continuous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqm complete all as specified and directed.

All as per item No. 118 above but for bell / buzzer on independent board controlled by one push button bell switch.

S&F Switch Piano flush type single pole 5 Amps One way, all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Cherry of Ordering Code : 14121/ Havells REO Cat No: AHESXXW061

S&F Switch Piano flush type single pole two way 5/15 Amps, all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Cherry of Ordering Code : 14122/Havells REO Cat No: AHESXXW062

S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 14119/Havells REO Cat No: AHEKSWW063

S&F Switch Piano type single pole 16/20 Amps One way, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39991/ Havells REO Cat No: AHESXXW201

S&F Socket outlet Two in one, 3/5 Pin piano type 10 Amp and 20 Amp flush type complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Ordering Code : 39994/ Havells REO Cat No: AHESYXW161

S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed by Engineer - in - Charge. Make: Anchor Ordering Code : 39072/ Havells REO Cat No: AHEEIXW000

S&F Electric bell (Ding dong) AC 230/250 volts grade single pole ISI marked, complete all as specified and as directed by Engr-in-Charge Make : Havells REO Ordering code : AHELEXW000/ ANCHOR

S&F switch piano flush type for bell Push 5 Amps, complete all as specified and directed by Engr-in-charge. Make : ANCHOR Penta Cherry, Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry, Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for re-fixing on same location all as specified and directed by Engr-in-Charge.

Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item No 133

S&F in repair LED light fitting with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge.

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 /12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge.

S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge.

S&F in repair LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by Engr-in-Charge.

S&F in repair surface/recessed mounting LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr-in-Charge. .

S&F in repair surface/recessed mounting LED down lighter round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.

M&L in replacement for submain wiring with 2X4QMM+1X4SQMM Earth Wire single core PVC insulated FRLSH sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit 25MM DIA complete including taking down unserviceable submain wiring all as per site requirement and direction by EIC, all accessories complete all as specified and directed.

Sub main wiring with two run single core 6.0 sqmm FRLS copper conductor cable connected to earth dolly in and including deavy duty PVC concelead conduit 25 MM dia, complete all as specified and directed by engineer-in-charge. Note : Two run of 6.0 sqmm and one run 6.0 sqmm cable and one run of PVC casing and caping shall be measured as one RM

Sub main wiring with two run single core 10 sqm FRLS copper conductor cable connected to earth dolly in and including heavy duty PVC concelead conduit 25 MM dia, complete all as specified and directed by engineer-in-charge. Note : Two run of 10 sqm and one run 10 sqm cable and one run of PVC casing and capping shall be measured as one RM

Sub main wiring with two run single core 1.5 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia in PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 sqm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 1.5 sqm and one run1.5 sqm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 2.5 sqm FRLS copper conductor cable PVC insulated, 1100V grade including 25mm dia in PVC concealed conduit/PVC casing & capping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 2.5 sqm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 2.5 sqm and one run2.5 sqm cable and one run of PVC casing and capping shall be measured as one RM

Supply and fix VTPN MCCB Double door Distribution Board 04 way 415 volts grade IP 43 Protection Grade with provision for (MCCB) as incoming and Three/single phase (TP/SP) outgoings, complete with insulated bus bar arrangement fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge. Make : C&S Cat No:CSDBMCCB100DD04IP43S/ Standard Cat No: DSDLVDRBAOFO04/ Indo Asian Cat No : 811888

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 4 Way all as specified and directed by Engr-in-Charge. Make : C&S Cat No:CSDBSPNDD08/ Standard Cat No: DSDNSHODXW08/ Indo Asian Cat No : 810321

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 8 Way all as specified and directed by Engr-in-Charge. Make : C&S Cat No:CSDBSPNDD08/ Standard Cat No: DSDNSHODXW08/ Indo Asian Cat No : 810321

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 12 Way all as specified and directed by Engr-in-Charge. Make : C&S Cat No:CSDBSPNDD12/ Standard Cat No: DSDNSHODXW12/ Indo Asian Cat No : 810323

S&F in repair for MCB TPN 63 Amp, 415 Volts- C curve of 10kA Make : C&S Cat No: CSMBS3C63N/ IndoAsian Cat No 810098/ Havells

S&F in repair Metal clad Plug socket single pole enclosure with two pin earth plug and socket with one single 20 Amp , 240 volts MCB complete all as specified and directed by Engr-in-charge.

S&F in repair energy saving LED garden light fitting, decorative, bollard type of capacity 9/11 watt with opaldiffuser & aluminium reflector complete with all accessaries and fixing arrangement on PCC block of size 45mm X 45 mm alogwith fixing nuts, bolts and PVC insulated aluminium conductor, stranded type of size 4.0 sqmm,2 -core including taking down old/unserviceable garden light fittings any type and wattage all as directed. Make - C&S cat pt No- LTGLCW9WLED,Havells cat pt No- LHEVBDP7IN6K008,Crompton & Greaves-LPTO-40-CDL-M

S&F LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

S&F in repair decorative LED gate light fitting of 30/40 watt,240 volts, diecast aluminium housing in pure polyster powder coated grey finish, top maintainable product with opening die cast cover, anti corrossive stainless steel screws & silicon gasket, HET PMMA diffuser,IP65 protection driver duly prewired up to terminal on firms to IS 10322 part 5/sec, 1 :1987,suitable for pole of dia 65-75 mm in-built electronic driver complete including taking down old/unserviceable gate light fitting complete all as specified and directed .Make - Crompton & Greaves Cat part No -LPT0-40-CDL or equivalent in Bajaj/Havells/C&S/ Philips/Wipro

S&F in repair Thermal magnetic MCCB 4 pole 63 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engr-in-Charge for MCCB DB. Make C&S Cat No: CSC2N4/ Indo Asian Cat No: 830022/ or equivalent makes to Standard

S&F in repair Thermal magnetic MCCB 4 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engr-in-Charge for MCCB DB.Make C&S Cat No: CSC2N4/ IndoAsian Cat No: 830022/ or equivalent makes to Standard

S&F in repair Thermal magnetic MCCB 4 pole 125/160 Amps 415 Volts 16ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engr-in-Charge for MCCB DB.Make C&S Cat No: CS3A4/ IndoAsian Cat No: 830095 / or equivalent makes to Standard

S&F in repair connection and testing 'C' series SPN MCB 40 to 63 Amp 240V, 50Hz, 10kA for lighting and other domestic loads incl necessary copper lugs etc all as specified and as directed by Engr-in-charge. Make C&S Cat No: CSMBS2C40/ Indo Asian Cat No: 810078/ or equivalent makes to Standard

S&F in repair 'C' series MCB SP6-32 Amps. Make C&S Cat No: CSMBS1C6 to CSMBS1C32/ Indo Asian Cat No: 810078/ or equivalent makes to Standard

S&F in repair 'C' series MCB SP 40 Amps. Make C&S Cat No: CSMBS1C40/ Indo Asian Cat No: 810060/ or equivalent makes to Standard

Fixing only serviceable MCB SPN/SP any capacity obtained from item no 03 as above all as specified and as directed by Engr-in-Charge.

Fixing only serviceable LED tube light fittings of 5w/12W/20W/2'x2' panel light and LED bulk head fitting 9W as obtained from Srl item No-02 above complete with all fixing accessories.

Fixing only serviceable MCB DB of any type and capacity obtained from Item No 03 complete all as specified and directed by Engr-in-charge.

S&F in repair Switch Piano flush type single pole two way 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Cherry of Ordering Code : 14122/Havells REO Cat No: AHESXXW062

S&F in repair Switch Piano flush type single pole 5 Amps one way fixed in replacement, complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Cherry of Ordering Code : 14121/ Havells REO Cat No: AHESXXW061

S&F in repair switch piano flush type for bell Push 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry, Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F in repair Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 14119/Havells REO Cat No: AHEKSWW063

S&F in repair Socket outlet Two in one, 3/5 Pin piano type 5 Amp and 15 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39994/ Havells REO Cat No: AHEKYXW163.

S&F in repair Switch Piano type single pole 16/20 Amps One way, fixed in replacement, complete all as specified and directed by Engr-in-charge. Make : Anchor Penta Ordering Code : 39991/ Havells REO Cat No: AHESXXW201

S&F in repair Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engr-in-charge. Make : Anchor Penta Ordering Code : 38820/ Havells REO Cat No: AHETOXW062

S&F in repair Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engr-in-charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F in repair Switch socket combination box type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engr-in-charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F in repair Switch socket combination box type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engr-in-charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F in repair Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body fixed in replacement, complete all as specified and directed by Engr-in-charge. Make: Anchor Ordering Code : 39072/ Havells REO Cat No: AHEEIXW000

S&F in repair Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked fixed in replacement, complete all as specified and directed by Engr-in-charge. Make : ANCHOR Penta Cherry,Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F in repair Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed by Engr-in-Charge. Make : Havells REO Ordering code : AHELEXW000/ ANCHOR

M&L for disconnecting all Electrical connection from MCB DB TPN/Wall Mounted Panel Box for reconnecting the same with providing proper Copper Bottle Lugs of suitable size and removing the burnt out internal wiring of DB/Panel complete with providing PVC Flexible conduit for Hanging wire complete all as specified and directed by Engr-in-Charge. Note : Replacement Burnt out MCBs of any type/size may be measured and paidseparately under relevant Items

Taking down/removing existing damaged cable connection from MCB DB/Wall Mounted Panel Board by making cutting chases on wall/ floor to extend the shorten UG cable of any type/size from Loop and making fresh to reconnect the same with suitable aluminium lugs complete including distribute the load equally on each phase all as specified and directed by Engr-in-Charge. Note : Cutting of Wall /Floor shall be measured and paid separately.

M&L for Cutting of hard standing n.exc 45 Cm defth, and n.exc 30 Cm width for taking out/laying UG Cable including making good disturbed surface as per existing all as directed .

S&F in repair Modular fan step regulator 120W 02 module including taking down unserviceable one all as specified and as directed by Engr-in-Charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular switch 01 way 06A, 01 module including taking down unserviceable one all as specified and as directed by Engr-in-Charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular switch 01 way 16A, 01 module including taking down unserviceable one all as specified and as directed by Engr-in-Charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular bell push flush type 6A, 01 module including taking down unserviceable one all as specified and as directed by Engr-in-Charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular socket, 6A-2/3 pin, 02 module including taking down unserviceable one all as specified and as directed by Engr-in-Charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular socket, 6A/16A-2/3 pin, 02 module including taking down unserviceable one all as specified and as directed by Engr-in-Charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 200x150x50mm deep including making necessary cutting all as specified and as directed by Engr-in-Charge, Make Anchor or equivalent to havells

S&F in repair PVC rectangular block for mounting switches, sockets, fan regulator etc. of size 250x200x50mm deep including making necessary cutting all as specified and as directed by Engr-in-Charge, Make Anchor or equivalent to havells

S&F in repair 3 mm thick plastic laminated ebonite sheet cover of size 200x150mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by Engr-in-Charge.

S&F in repair 3 mm thick plastic laminated ebonite sheet cover of size 250x200mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by Engr-in-Charge.

M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistnace is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the engineer incharge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.

M/s AKHIL SHARMA

KUMAR CONSTRUCTION CO

VARDHMAN INTERNATIONAL