Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC COURT ROAD SURATGARH 335804 | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L1 | Accepted-AOC Due to lowest bid | |
| 2 | L2₹21.2 L+₹1.8 L (9.07%)Rejected-Finance | L2 | Rejected-Finance Due to higher bid | |
| 3 | L3₹22.7 L+₹3.3 L (16.9%)Rejected-Finance | L3 | Rejected-Finance Due to higher bid | |
| 4 | L4₹25.2 L+₹5.8 L (29.8%)Rejected-Finance | L4 | Rejected-Finance Due to higher bid | |
| 5 | L5₹27.4 L+₹8.0 L (41.4%)Rejected-Finance | L5 | Rejected-Finance Due to higher bid |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
4 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) FEROZEPUR CANTT
GE (WEST) FEROZEPUR CANTT
WELCOME MAINT TO OFFRS MD ACCN IN SITE 1 AND 2 UNDER AGE BRI OF GE (WEST) FEROZEPUR CANTT
2024_MES_644043_1
802024/GE-04/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) FEROZEPUR CANTT
₹60,000
Yes
20 May 2024
8 Mar 2024
11 Apr 2024
8 Mar 2024
4 Apr 2024
22 Mar 2024
Amount
Demolition brick work built in cement mortar of any specification and in any position complete all as specified and directed.
M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.
All as per ser item No. 2 here-in-before but using old bricks retrieved from ser item No :1 here-in-before including cleaning and removal of mortar from old bricks.
M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
M&L non skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
M&L non skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed.
M&L non skid coloured ceramic tiles of 7mm to 8mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in cement mortar 1:4 complete all as specified and as directed.
M&L glazed coloured and cereamic tiles in vertical surfaces 450X300 and 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and directed.
M&L green marble slab, 16mm-18mm thick of size not less than 1 Sqm each, machine cut as cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar 1:4 and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified and directed.
M&L Granite (of any type) tiles 16mm - 20mm thick machine cut, bedded andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar 1:4 complete all as specified and directed.
M&L Vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles exceeding 0.36 Sqm and not exceeding 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Dark Shade) cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L light shade Vitrified tile 10mm thick polished, area of tile not exceeding 0.36 Sqm as in Skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M&L Hardcore of broken bricks of gauge not exceeding 63mm, deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed..
M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
M&L cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified and directed.
Demolition of stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.
M&L machine pressed precast conctete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note :- Sand will be measured and paid for seperately.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats, bed blocks, coping etc including necessary form work complete all as specified and directed.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.
All as per ser item No. 22 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.
Taking down shutters of any description and refixing in the same opening exceeding 1 sqm and not exceeding 2 Sqm each complete all as specified and directed.
M&L cutting holes in brick wall built in cement mortar for fixing hold fasts and making good dismantled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1, depth of embedded portion of hold fasts measured from the face of jamb into wall exceeding half brick but next one brick complete all as specified and directed.
S&F pressed steel frames made of 1.25mm thick mild steel sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long mild steel conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.
All as per ser item No. 26 here-in-before but size 125mmx60mm with double rebate.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19mm x 19mm mild steel square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm mild steel square tube inside 19mm x 19mm mild steel square tube suitably screwed complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes of size 15mm x 15mm for top and bottom rails and 19mm x 19mm for stiles, mild steel frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.
S&F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed.
S&F factory made 35mm thick, 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F factory made 35mm thick glazed and skeleton shuttersof 2nd class hard wood with or without shash bar (hollock) open rebated and prepared to receive glass, gauze etc devided into square with plain chamfered or rounded and rebated sas bar (any no of bars)for securing glass, gauzed etc sizes of members of shutters as specified in SSR Part-1 sec-8 clause 8.20(a) complete all as specified and directed.
S&F factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to Each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
Demolition of boarding of any description and in any position complete all as specified and directed.
S&F 25mm thick boarding second class hard wood & fixed with nails in any situation clean sawn with butt joints fixed in shelves partitions and shelves of built in cup boards almirahs book cases toilet boxes racks, pelments and similar work complete all as specified and directed.
S&F 14mm-16mm solid PVC board plain colour, fixed with screws or adhesive with complete accessaries as in shutters complete all as specified and directed. Make : Rajshree, Echon or equivalent as approved by GE.
M&L 2nd class hardwood plain fillets square, rectangular in section clean swan, secured with nail or band including two coats of paint over a coat of primer not exceeding 13 sqcm complete all as specified and directed.
S&F 18mm-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in pelmet box or cup board shelf including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & french polishing to edging, fixed in repair complete all as specified and directed.
S&F 3.00mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares not exceeding 0.50 Sqm complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F 300mm mild steel helical door spring including roller and roller plate complete all as specified and directed.
S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm including hacking out broken glass and putty/beading from old metal frame, complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples as in repair complete all as specified and directed.
S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.
S&F 200mm long Aluminium, anodised barrel tower bolts of extruded section, complete all as specified and as directed.
S&F 150mm long extruded anodised Aluminium alloy handles, fabricated type complete all as specified and directed.
S&F 300mm long alluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.
S&F butt hinges 100mm size exturded Aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B21 complete all as specified and directed.
S&F butt hinges 125mm size exturded Aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and directed.
S&F 150 mm Floor door stopper of Aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F 4 lever Aluminium mortice lock, vertical type size 100 mm complete all as specified and directed.
S&F hydraulically extruded Aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851mm to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.
S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.
S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed.
Taking down cement plaster inlcuding racking out joints, hacking for keys, scrubing down with water, complete all as specified and directed.
M&L 10 mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in cement mortar 1:4 on any face of brick walls or conrete surfaces, surfaces finished even and fair complete all as specified and directred.
M&L rendering 5mm thick in cement mortar 1:3 on ceiling, soffits of chajja or similar location any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement,etc complete all as specified and directred.
M&L preparation of new plastered surfaces of wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and directed.
M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
M&L white wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.
S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified and directed.
S&F 125mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union as in repair complete all as specified and directed.
S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed.
S&F chromium plated brass fancy type bib taps 15 mm dia bore type with crutch handle, screwed down, screwed for iron pipe or famale as fixed in repairs complete all as specified and directed.
S&F 15mm dia pillar tap fancy type chromium plated, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe as fixed to WHB as fixed in repair complete all as specified and directed.
S&F chromium plated WHB mixer 15mm bore mixing and hot and cold water scrwed down for iron pipe and fixed and waste system with 450mm long braided hoses complete all as specified and directed.
S&F chromium plated fancy type15mm bore dia hot and cold wall mixer with provision for over head with 115mm long bend pipe one upper side connecting legs and wall flanges complete all as specified and directed. Make:- Jaquor Cat Part No. FLR 5219 N or techno-commercially equivalent in approved makes.
S&F 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions as in repair complete all as specified and directed.
S&F brass chromium plated 20mm dia towel rail of 60cm long fixed with brackets at its ends as fixed in repairs complete all as specified and directed.
S&F chromium plated Soap dish Oval /squaretype as fixed in repairs complete all as specified and directed.
S&F chromium plated Toilet Paper Holder with flap as fixed in repairs complete all as specified and directed.
S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, chromium plated coupling & cantilever brackets embedded in cement and sand mortar in wall, overall size of sink 495mmx420mm, bowl size 410mmx330mmx 160mm as in repair complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs complete all as specified and directed.
S&F in replacement of pressure JET for EWC including PVC connection and chromium plated fitting as fixed in repairs complete all as specified and directed.
S&F chromium plated towel ring square in repair complete all as specified and directed.
S&F Health faucet (ABS Body) with 8mm dia 1.00 m long easy flexible tube chormium coated finish and wall hook complete as specified and directed. Make: Jaquar model No: ALD-CHR-585 or Techno-commercially equivalent in approved makes
S&F vitreous China wash down water closet pan (pedestal pattern) white/coloured cascade type 640mmX360mmX690mm (monolithic flush cistern type) single piece wc with PP seat cover, hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions complete all as specified and directed. Make : Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s
S&F syphon Kit including EPDM rubber washer for monolithic or Cascade type of flush cistern for vitreous China 10 litre capacity as fixed in repairs complete all as specified and directed.
S&F vitreous China wash hand basin size 550mmx400 (pedestal pattern) including necessary fittings to fixed with wall complete set and brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
S&F rotational moulded triple layered polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.
S&F rotational moulded triple layered polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.
S&F vitreous China white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary cement concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.
S&F vitreous China white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and directed.
S&F Toilet Seat cover plastic for washdwon water closet with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as specified.
S&F 1.00mm thick stainless steel plate racks of size 750mmX600mmX250mm complete all as specified and directed.
S&F vitreous China WHB white flat back size of 550mmX400mm excluding taps waste chain and plug and porcelien stopper but including brakets 32mm dia waste pipe as fixed in repairs complete all as specifed and directed. Make : parryware, Cera or equivalent in approved makes
S&F 20mm dia mild steel PVC colour powder coated curtain rods with fancy type brackets including with all fittings as fixed in repairs complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75mm dia PVC (SWR)with access door bends any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR)with access door bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 15mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and directed.
S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and directed.
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as specified in MES schedule part-I & II as in repair complete all as specified and directed.
S&F Gypsum Board 6mm to 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm, Main tee 38mmX23mm, Sub tee 23mmX23mm) including Aluminium anodised/powder coated snap grid frame 605mmX605mm for false ceiling including hanging arrangement complete all as specified and directed. Note:- The hanging stay wire shall not be less than 4.00mm thick and the cost of hanging stay shall be deemed inclusive of the quoted rate.
Dismantling of steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
S&F rolled section as in posts/pillars where connected with angle cleat or other connecting plate etc of fe 410-W (grade E-250) quality 'B' including fabrication, erection and fixing complete all as specified and directed.
S&F rolled mild steel plates Fe 410 -W (Gde-E- 250) quality- A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment complete all as specified and directed.
S&F mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exceeding 15cm and not exceeding 22.5cm long complete all as specified and directed.
Dismantling plain or corrugated sheet on roof covering complete all as specified and directed.
S&F pre-painted galvalume alumimium zinc coating GI based corrugated/crimped steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa in roof covering, fixed with self tapping screws complete all specified and directed.
S&F pre-painted galvalume alumimium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa in roof covering, fixed with self tapping screws complete all specified and directed.
S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J- type or L- type hook bolts complete all as specified and directed.
S&F powder coated of (any colour) Aluminium door window, ventilator etc fixed/sliding or pull and push type in shutter frames or shutters with two/three track sliding Aluminium frame of approved size, including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws, including necessary anodised Aluminium fittings like handles etc including taking down all as per manufacturers instructions complete all as specified and directed. Note: EPDM Rubber beading/gasket measured and paid seperatley. Make (Aluminium frame): Jindal/Hindalco or equivalent in approved makes.
S&F Aluminium decogrill 10mm thick with necessary channels and clips, DG, 104 of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete complete all as specified and directed.
S&F solar control film 25 micron reflective sticked to glass panes as per manufacturers instruction complete all as specified and directed.
S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.
S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered in writing complete all as specified and directed.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.
M&L 10 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid for separately.
M&L 10mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 mixed with water proofing compound @3% by weight of cement content as in verticle surfaces and finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid for seperately.
Supply only integral water proofing compound.
M&L applying evenly a tack coat of industrial bitumen of grade 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including bitumen primer complete all as specified and directed.
M&L mud phuska, 80mm thick, average consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified and directed.
M&L brick tiles 40mm thick laid over a 25mm thick layer of mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement as the work proceeds complete all as specified and directed.
All as per ser item No. 133 here-in-before but except tiles.
M&L PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in kerbs, mud stop, rounded or chamfered on edges including formwork complete all as specified and directed.
M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.
M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling complete all as specified and directed.
M&L preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of colour wash on walls including cornices complete all as specified and directed.
M&L washing rubbing down and stopping of distempered and painted surfaces including preparation and applying one coat of oil bound distemper complete all as specified and directed.
All as per ser item No. 139 here-in-before but on ceiling surfaces.
M&L complete removal of existing treatment of wall suface and applying two coats of oil bound distemper, over a coat of primer on a coat of 1mm thick wall care putty, complete all as specified and as directed.
M&L washing rubbing down and stopping of distempered and painted surfaces including prepartion and applying one coat of cement based paint on wall surfaces including proper curing complete all as specified and directed.
M&L complete removal of existing treatment of walls applying two coats of cement based paint over one coat of cement primer on plastered surfaces complete all as specified and directed.
M&L preparation of old decorated wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L complete removal of existing treatment on terra-cotta floor surfaces like a pathway pavers, chequered, inlerlocking tile, roof tiles surfaces etc including necessary preparation of surfaces and applying two coats of terra-cotta over a coat of primer complete all as specified and directed.
M&L for writing letters or figures (Block Roman Italic and Indian ) 15 cm High on wall surfaces, so that the stand out boldly and solidly without showing signs of brush marks complete all as specified and directed. Note:- The letters to bewrite with in the black synthetic enamel painted back ground, it is measured and paid to Seperately
M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed.
M&L preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Disconnecting existing tanks exceeding 250 litre and not exceeding 500 litre, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position. Powder shall deemed inclusive of quoted rate.
Disconnecting existing tanks exceeding 500 litre and not exceeding 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position. Powder shall deemed inclusive of quoted rate.
Easing of wooden window shutters/CB Shutters (one unit shall comprise of one window/CB/showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. complete all as specified and directed.
Easing of wooden door shutters (one unit shall comprise of one panelled or skeleton door shutter irrespective fo number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolts including necessary nail and screws etc. complete all as specified and directed.
Taking down and refixing of Gypsum Board 6mm to 7mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm, Main tee 38mmX23mm, Sub tee 23mmX23mm) including Aluminium anodised/powder coated snap grid frame 605mm X 605mm for false ceiling including hanging arrangement complete all as specified and directed.
M&L welding exceeding 6mm but not exceeding 9 cm in length, thickness of metal to be welded complete all as specified and directed.
Taking down carefully Copper/Aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.
M&L point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends, reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks (for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.
(b) One socket outlet on the same board controlled by one single pole one way switch
(c) One 5 amps socket outlet independent controlled by one single pole 5 Amps switch.
All as per ser Item No. 157 here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.
All as per ser Item No. 157 here-in-before but existing conduit and existing mild steel pressed steel/ cast iron box complete all as speicifed and directed. (a) One light point/fan/bell point controlled by one single pole one way switch.
(b) One 5 Amps socket outlet independent controlled by one single pole 5 Amps switch.
All as per ser Item No. 160 here-in-before but existing conduit and existing MS pressed steel/ cast iron box complete all as speicifed and directed.
S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed.
S&F switch piano flush type 15 Amps, single pole one way complete all as specified and directed.
S&F socket outlet 2 in one , 5/6 Amps flush type complete all as specified and directed.
S&F socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified and directed.
S&F ceiling rose, PVC/Polycarbonate, isolated three terminals complete all as specified and directed.
S&F lamp holder insulated body threaded dome pattern, suitable for bracket / batten fitting complete all as specified and directed.
S&F stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as required in repair complete all as specifed and directed.
S&F bell push flush type 5 Amps complete all as specified and directed.
S&F bell ding dong type AC 230 Volts single pole complete all as specified and directed.
S&F in replacement of existing modular Switch one way 6 Amps, 1 module complete all as specified and directed.
S&F in replacement of existing modular switch one way 16 Amps, 1 module complete all as specified and directed.
S&F in replacement of existing modular socket 6 Amps - 2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement of existing modular socket 6 Amps/16 Amps - 2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 1 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 2 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 3 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 4 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 6 module complete all as specified and directed.
S&F in replacement of existing modular white cover plate with frame, 8 module complete all as specified and directed.
S&F in replacement of existing modular step type regulator, 120 Watts - 2 module complete all as specified and directed.
S & F modular step type regulator, 120 Watts - 2 module complete all as per specified and directed. Make - Precision/Anchor/Havells/Legrand
S&F LED lights fitting 1x 20 Watts, 220 Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Makes: Havells Cat Part No. LHEXBLP7PN1W020 or techno-commercially equivalent in approved makes.
S&F in repair LED tube light fitting 9 Watts batten type fixed on wall/ ceiling etc. including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Makes: - Cat Part No LHEXBLP7IN1W009 of Make - Havells or techno-commercially equivalent in approved makes
S&F LED luminaire 600 mm x 600 mm, 35/36 Watts, 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Makes: Crompton Cat Part No. LCTLRN-36-FO-CDL or techno-commercially equivalent in approved makes.
S&F LED street light fitting 35 Watts 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F in replacement of plastic exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 Volts, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Note: Unserviceable exhaust fan to be deposited to AGE E/M (W) yard by contractor and the cost thereof shall be deemed included in quoted rate.
S&F in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 Volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.
All as per ser item No. 190 here-in-before but SPN DB's 4 way.
S&F MCB TPN 415 Volts 63 Amps, 10 KA breaking capacity complete all as specified and directed.
S&F MCB, single pole and neutral 240 Volts, 32 Amps 10 KA 'B' series complete complete all as specified and directed.
S&F MCB, Single pole 240 Volts, 6 Amps - 32 Amps 10 KA 'B Series complete all as specified and directed.
M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC concealed with 1 x 6 Sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core and one run of PVC conduit shall be measured as single run.
Ms Hari Singh
Manjeet Singh Contractor
B.L. Chaudhri and Co.
CHETAK CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .