CWEAFJ-23/2019-20 SPECIAL REPAIRS TO CERTAIN BILLETS AND SEWAGE LINES AT AF STN PATHANKOT

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed.

Pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to complete all as specified and directed.

Pre-painted galvantume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws complete all as specified and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed.

Factory made solid PVC door frame single rebated of size 60 x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws, complete all as specified and directed.

Factory made solid PVC moulded door shutter, 28 to 30mm thick(Stiles) with 2,4 or 6 raised pannel design with 2mm thick moulded prelam PVC sheet on the front face and 2 mm thick plane colour PVC sheet on back face complete all as specified and directed.

Pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 in back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1in back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Factory made 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made complete all as specified and directed.

Factory made PVC prelam wire guage shutter (Single piece both side), 33 to 35mm thick consisting of frame made up of MS tube of size 25mm X 25mm (19 guage) for top & bottom rail, and in styles. Single piece plane coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 20mm thick struck inside with solvent cement. Plane colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC board 22mm to 25 mm solide core board . Panel shall be of wire gauge stainless steel wire cloth 0.25mm to 0.36mm nominal dia of wire and everage width of aperture 1.4mm to 2mm. stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail , complete all as specified and directed. Note : All screws shall be self tapping chroming plated and length of Screw not less than 50 mm.

Factory made Steel window/ventilator 1.25mm thick box type(primer coated) ERW hollow P section of size 60mmx25mm including grill using 10sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each ventilator including following fitting welded to frame shutter including (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per ventilator (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf. (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf.

Preparaption of new steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Preparaption of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Mild steel, butt hinges 100mm, cold rolled medium weight complete all as specified and directed.

PTMT Tower bolt with bright bolts of size 200mm complete all as specified and directed. Make:- Summit/ Paryag.

PTMT handle of size 150mm complete all as specified and directed. Make:- Summit/ Paryag.

S&F in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Stainless steel sliding door bolts, plate type, , with bright bolt not lesss than 10mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 300mm long complete all as specified and directed.

Demolition of brick work, stone/boulder masonry built in cement mortar including all quoins, arches, pillars etccomplete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan 6m mean radius built in cm 1:6 complete all as specified and directed. .

Brick work with sub class B bricks straight or curved on plan 6m mean radius built in cm 1:6 Except Bricks complete all as specified and directed. .

PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in coping etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in above ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

75mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection including finishing the surfaces even and fair complete all as specified and directed.

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, with two coats of oil bound distemper of any tint including taking down existing plaster complete all as specified and directed.

Applying 3mm thick wall care putty on wall surfaces complete all as specified and directed.

15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of weather proof emulsion paint on new surface including taking down existing plaster complete all as specified and directed.

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including two coats of oil bound distemper of any tint complete all as specified and directed.

15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including two coats of weather proof emulsion paint on new surface all as specified.

Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including applying two coats of weather proof emultion paint incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :Rate for form work if reqd shall deemed to be included in the rate quoted by the contractor.

Rendering 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed or bedding layer in CM 1:4 and dismantling existing floor tiling complete all as specified and directed..

Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement motar 1:4 and dismantling existing tiling complete, complete all as specified and directed..

Machine cut kota stone slab 20-25mm thick as in flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick cement screed bed in cement mortor 1:4 and dismantling existing floor complete,complete all as specified and directed.

Machine cut kota stone slab 20- 25mm thick as in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 10mm thick cement plaster in cement morter 1:4 and dismantling existing skirting/dado complete all as specified and directed.

Rotational moulded polyethelene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 25mm high pressure with polythene float and fly nut etc complete including dismantling existing water tank complete all as specified and directed.

S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings , short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and directed.

S&F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and directed.

cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed.

S&F in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' or 'S' trap complete incl making good to floor all as specified.

S&F in repair Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400mm including cutting for and pining in ends of brackets or erecting stand, waste coupling and PVC waste pipe, 32mm dia to be fixed in M S brackets complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs plastic water closet seat,black closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device for pedestal pattern all as specified

CP jet for Pedestal pattern pan including 450/600mm long PVC connection and fixed complete all as specified

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.

PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.

Brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs 15mm bore, stop valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified and directed.

S&F in repairs 15mm bore, stop valve/Angle valve fancy type chromium plated cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) with spout pipe 50 mm dia up to 600 mm long or as per site requirement including demolition of existing surface all as specified.

Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand.

S&F in replacement 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed.

S&F grating round 100mm size of PTMT (minium weight 25gms) complete all as specified and directed.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (midium weight 300 gms) complete all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (midium weight 190 gms) complete all as specified and directed.

Factory made precast cement concrete interlocking tiles 60mm thick of size and shape as directed, strength not less than that of M-35 concrete laid over 40mm thick sand cushion and jointed in, on and including clean sand bed & joints complete all as specified and directed. Note:- Supply only of sand to be measured and paid seperately

Supply only clean dry coarse sand filling under floors or in foundation including watering and consolidation complete all as specified & directed

100mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregaes as in hard standing, PCC parth and the like, laid in bays as directed, including finishing the surfaces even and fair complete all as specified & directed.

M&L Cutting holes into or through brick walls built in cement mortarof size 150 mm x 150mm x 150 mm & making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Framed bracket of angles or tees with web & flanges cut to shape, drilled & countersunk for screw, including bending & welding angles, as necessary, gusset plates, riveting, etc., n exc 10kg each brackets, conforming to Fe 290 GDE -E-165 complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface fininished even and smooth without using extra cement including mixing of integral water proofing compound in the proportion as per manufacturers instructions complete all as specified and directed.

Supply and fixing in repair 18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with autoclosing hydraulic hinges and modular handles, design and colour as approved by GE suitable for kitchen cabinet etc complete all as specified (Make : Action tesa/ Kitply/ Archidlan)

Taking down existing cupboard and supply & fixing cupboard made of HDR board 18 mm thick water proof with life time waranty for anti-termite.cabinets shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified (Make : Action tesa/ Kitply/ Archidlan)

S&F Continuous (piano) hinges,Width of flaps (when open) 20 mm flap stainless steel, bright finish or electrogalvanished complete all as specified and directed.. Note : All screws shall be self tapping chrome plated.

Supply and fixing aluminium door seal up to 1200mm length best quality complete all as specified and directed.

S & F in repair Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and directed.

Taking out and cleaning of existing roof treatment of any description completely and washing, rubbing with water and providing 20mm thick cement plaster in cement mortar 1:4 finish fair and even without using extra cement to receive water proofing treatment and providing and laying of water proffing treatment on roof with APP modified prefabricated five layer 3mm thick water proofing membrane, super thermolay with non woven polyester mat reinforcement of 160gsm, weight of membrane @3.5 to 4 Kg/Sqm over and below a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm . The membrane shall be laid using butane torch. The end lap should be 100mm and the side lap must be minimum 75mm. The membrane shall be first laid up to the parapet wall junction and then shall be overlaped with another memberane (flashing) with an overlap covering upto a distance of 300mm. In case parapet height is less than upto 500mm, membrane shall be terminated at the top of parapet. All rain water pipes opening shall be suitable sealed with APP membrane. including disconnection and refixing in same position of existing water storage tank and all GI pipe/ fittings complete All as specified and directed by the Enrg-in-Charge. (The rate includes for fillling of crackes in existing roof with cement putty using suitablebonding agent (Shalocrate-42) before laying cement plaster all as directed by Engineer-in-Charge). NOTE:- Contractor shall write "Name of contractor and Date of Laying of Membrene"with paint on the wall after laying of membrane in all respect.

Supply only liquid water proofing compound complete all as specified and directed. Make : Pidilite/LW

Roof tile mangalore pattern, interlocking at side joints, bedded and jointed in CM 1:4 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed..

Returing filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed..

Concrete bed to drain pipes of bore 150mm dia including packing under , hunching against the sides of pipe after they are laid tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates complete all as specified and directed..

150 mm internal dia Salt-Glazed stone ware drain pipes laid in trenches in concrete padding jointed in cement mortar 1:1 complete all as specified and directed.

100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed.

75 mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed.

100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured)complete all as specified and directed.

75mm dia, cast iron branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

100mm dia,cast iron branch pieces, Double (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

75mm dia, cast iron branch pieces, Double (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed..

100 mm dia, cast iron branch pieces, Single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

75 mm dia cast iron cowls complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

LED tube light along with fixture, 22 W complete all as specified and directed

S&F recess mounting minimum 35W LED luminaire suitable for fixing in false ceiling complete including electronic driver, suitable for cutout of size 2ft by 2ft suitable for 240 Volts, 50 Hz complete with all accessories all as specified and directed by Engineer-in-charge.

S&F surface mounting minimum 35W LED luminaire suitable for fixing in ceiling complete including electronic driver, suitable for cutout of size 2ft by 2ft suitable for 240 Volts, 50 Hz complete with all accessories all as specified and directed by Engineer-in-charge. Make: CGL/Bajaj/Havells)

Supply and fixing surface mounting fitting in PVC polycarbonate body with B-22 holder and 10 watt LED lamp with B-22 base complete all as specified and directed by Engr-In-Charge.

Supply and fixing socket combination multipurpose 5 and 15 Amps 230 Volts modular type in two module complete with cover plate and base plate complete all as specified and directed.

Supply and fixing socket combination multipurpose 5 pin and 5 Amps 230 Volts modular type complete with cover plate and base plate complete all as specified and directed.

Supply and fixing switch modular type one way 6 Amps 230 Volts in one module complete with cover plate and base plate complete all as specified and directed.

Supply and fixing switch modular type one way 16 Amps 230 Volts in one module complete with cover plate and base plate complete all as specified and directed.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 Amps complete all as specified and directed by Engr-In-Charge.

Supply and fixing street light fitting LED type 60 Watt with pressure die casted aluminium housing with flat glass optical cover with lens to ensure uniform distribution IP 66 protection including LED Driver and housing of same make as of fitting as per BIS standards including connecting terminals, mounting clamp, bracket and all other accessories reqd for fixing and making fitting operational complete all as specified and directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings/switch sockets for repair or replacement of burnt/worn out accessories or carrying to MES store and refixing after repair or requirement (Accessories or components to be provided free for replacement by department)

Supply and fixing in replacement Distribution board iron clad, double door suitable for MCCB as incomer and MCB as outgoing 415 Volts 3 phase 50 Hz 4 way complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing capacity 25 KA of the same make as of distribution board including cutting chases to wall for fixing DB and making the disturbed wall surface all as required at site or directed by Engr-in-Charge.

Supply and fixing in replacement sheet metal enclosure for DBs when MCBs to be used Double door Single pole and neutral 8 way complete all as specified and directed.

Supply and fixing in replacement MCB SPN 32 Amps 10KA, 230 volts with integrated label holder complete all as specified and directed.

Supply and fixing in replacement MCB SP 6-32 Amps, 10 KA, 230 volts with integrated label holder complete all as specified and directed.

Supply and fixing Ceiling rose, 3 terminal, PVC/polycarbonate, isolated body complete all as specified and directed.

Point wiring for one light point/fan point/5Amps socket controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable multistrand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable(green colour) as earth lead in and including concealed non rigid PVC conduit medium grade with all fittings(ISI marked) controlled by one switch including metallic box, corrosion resistant with weldfree design with mounting clip and earth clip, 1mm thick of required size including mounting base plate of required size as required and other accessories as required for wiring of modular switches including cutting chases to wall and making good the distributed surfaces to match with the existing specification complete all as specified and directed.

All as per Item no 108 above here-in-before but on same board with 1.5 sqmm wire for 5 Amps socket outlet complete all as specified and directed.

All as per item no 108 above here-in-before but with copper wire of size 2.5 sqmm for 15 Amp socket outlet complete all as specified and directed.

Taking down ceiling fans and exhaust fans, sealing cable end, dismantling blades and removing fan and blades to store for complete all as specified and directed.

Hanging only ceiling fan and connecting upincluding provision of cable from ceiling rose or connector to fan complete all as specifed and directed. Note :- Ceiling fan shall be issued under Sch B Free for fixing

Fixing only exhaust/wall mounted fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed. Note :- Exhaust fan/wall mounted fan shall be issued under Sch B Free for fixing

Wiring for circuit/submain wiring alongwith earth wire with the 2x6 sq.mm + 1x6 sq. mm earth wire of FR PVC insulated copper conductor, single core cable in surface/recessed in and including non metallic rigid PVC conduit medium grade ISI Marked of suitable size complete all as specified and directed.

Wiring for circuit/submain wiring alongwith earth wire with the 2x10 sq. mm + 1x10 sq. mm earth wire of FR PVC insulated copper conductor, single core cable in and including recessed non metallic rigid PVC Conduit medium grade ISI Marked of suitable size complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick as earth electrode not less than 2.25mtr below ground level with top edge of earth plate not less than 1.50 metre below normal ground level connected to galvanised earth wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth strip protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia medium grade with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 with adequate quantity of charcoal dust and salt all around the earth plate including all necessary earth work in any type of soil, removing surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 and directed by Engineer-in-charge. (Note:- Up to 7.5 Mtr length of GI pipe and GI wire shall be deemed to be included in unit rate quoted by tenderer.

Prepration of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Prepration of newly plastered surfaces of facia,chajja and roof projection etc and applying two coats of weather proof emulsion paint complete all as specified and directed.

KUMAR TRADING CO

JATINDER CONSTRUCTION COMPANY PRIVATE LIMITED

dadwal engineers

Ashoka Engineers

SUBASH MAHAJAN