REPAIR TO ALL TYPE OF WOODEN AND STEEL FURNITURE FOR RANGIA AND CHANGSARI MILITARY STATION UNDER GE RANGIA

Amount

M & L for taking down old unserviceable front legs of size 460x 55X30mm (as per drg No. FD-279) of chair dining and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts shall be french polished to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 01 above but for Rear legs of size 890x55x30mm.

All as per serial item No. 01 above but for Front/ Back/ Side rails of size as per drg No. FD-279.

All as per serial item No. 01 above but for Back rest of size 440x45x15 mm.

All as per serial item No. 01 above but for Leg stiffeners of size 420x20x25 mm.

M&L for taking down old unserviceable front legs (as per drg No. FD/MAP-II/04) of chair dining cushioned and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts shall be French polished & to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 06 above but for rear legs of chair dining.

All as per serial item No. 06 above but for front/ back/ side rails of chair dining.

All as per serial item No. 06 above but for back rest of chair dining.

All as per serial item No. 06 above but for vertical stiffeners of chair dining.

All as per serial item No. 06 above but for stiffeners of chair dining.

All as per serial item No. 06 above but for Seat made out of 12mm thick BWR grade plywood with 75mm thick 40 density cushion and cushion cover made out of best quality cloth of chair dining long back.

50 x 50 x 20 mm and 3mm thick SS right angle bracket between leg and rails fixed with steel screws 8 nos in one chair.

M&L for taking down old unserviceable front/ rear legs (as per drg No. FD-358) of chair easy cushioned and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts shall be french polished & to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 14 above but for front/ back rails of chair easy cushioned.

All as per serial item No. 14 above but for side rails of chair easy cushioned.

All as per serial item No. 14 above but for front/ back stiffeners of chair easy cushioned.

All as per serial item No. 14 above but for upper/ lower rails of chair easy cushioned.

All as per serial item No. 14 above but for arms of chair easy cushioned.

S&F in-repair of Seat made of 12mmm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly fixed with good quality tapestry cloth as approved by GE.

S&F in-repair of Back made of 12mmm thick BWR grade plywood over which 40 density foam 50mm thick shall be provided duly fixed with good quality tapestry cloth as approved by GE.

M&L for taking down old unserviceable front legs (as per drg No. FD-357) of chair dining long back and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts will be french polished and to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 22 above but for rear legs of chair dining long back.

All as per serial item No. 22 above but for Front/ Back/ Side rails of size as per drg No. FD-357.

All as per serial item No. 22 above but for Seat made out of 12mm thick commercial ply with cushion and cushion cover made out of best quality cloth of chair dining long back.

All as per serial item No. 22 above but for back rest with 10mm thick commercial ply, cushion and cushion cover made out of best quality cloth of chair dining long back.

All as per serial item No. 22 above but for stiffeners of chair dining long back.

M&L for taking down old unserviceable top of size 900mm x 600mm from Table 3'x2' without drawer (as per Drg No. FD-284) and supply & fixing new one as specified in drawing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 28 above but for Legs of Table 3'x2' without drawer as per drg.

All as per serial item No. 28 above but for Long Rails of Table 3'x2' without drawer as per drg.

All as per serial item No. 28 above but for Short Rails of Table 3'x2' without drawer as per drg.

All as per serial item No. 28 above but for Leg Stiffener of Table 3'x2' without drawer as per drg.

M&L for taking down old unserviceable top of size 900mm x 600mm from Table 3'x2' with drawer (as per Drg No. FD-284) and supply & fixing new one as specified in drawing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 33 above but for Legs of Table 3'x2' with drawer as per drg.

All as per serial item No. 33 above but for Long Rails of Table 3'x2' with drawer as per drg.

All as per serial item No. 33 above but for Short Rails of Table 3'x2' with drawer as per drg.

All as per serial item No. 33 above but for Leg Stiffener of Table 3'x2' with drawer as per drg.

All as per serial item No. 33 above but for Drawer of Table 3'x2' with drawer as per drg.

M&L for taking down old unserviceable top from Peg Table (as per Drg No. FD-384) and supply & fixing new one as specified in drawing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 39 above but for Legs of Peg table as per drg.

All as per serial item No. 39 above but for Long rails of Peg table as per drg.

All as per serial item No. 39 above but for Short rails of Peg table as per drg.

All as per serial item No. 39 above but for Stiffners of Peg table as per drg.

M&L for taking down old unserviceable top from Teapoy wooden (as per Drg No. FD-278) and supply & fixing new one as specified in drawing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 44 above but for Legs of Teapoy wooden as per drg.

All as per serial item No. 44 above but for Long rails of Teapoy wooden as per drg.

All as per serial item No. 44 above but for Short rails of Teapoy wooden as per drg.

All as per serial item No. 44 above but for Stiffners of Teapoy wooden as per drg.

M&L for taking down old unserviceable top from Table centre (as per Drg No. FD-274) and supply & fixing new one as specified in drawing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 49 above but for Legs of Table centre as per drg.

All as per serial item No. 49 above but for Long rails of Table centre as per drg.

All as per serial item No. 49 above but for Short rails of Table centre as per drg.

All as per serial item No. 49 above but for Stiffners of Table centre as per drg.

S&F Top of table dining for six persons(as per Drg No. FD-239/FD-273) of size 1500mm x 900mm x 19mm thick plywood 18mm with 1.5mm thick plastic laminated sheet, laminated sheet fixed over it with fevicol 4mm thick teak wood edging provided all around the top after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

M & L for taking down old unserviceable Legs 60mm x 60mm in section at top and 40mm dia at bottom from Table dining 6 person and supply & fixing new one as specified in drg made out of teak wood, duly seasoned and free of knots. The new parts shall be french polished and matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 55 above but for long rails size 25mm x 100mm x 1500mm.

All as per serial item No. 55 above but for short rail size 25mm x 100mm x 900mm.

S&F in-repair of L-shape corner of flat iron 5mm thick 4" x 4" between legs and rail to be fixed with screw

S&F in replacement of 100mm thick cushion of cool foam of 40 density covered with best quality tapertry cloth duly stiched and cushion cover made out of best quality cloth one side zip as approved by GE, size 530mm x 500mm for sofa set of five complete (as per drawing No. FD-281) complete all as specified and as directed by Engineer-in-charge. Make : Kurl-on/Sleepwell/reliance

All as per serial item No. 59above but for Leg for sofa set of five as per drg.

All as per serial item No. 59 above but for Arm for sofa set of five as per drg.

All as per serial item No. 59 above but for Wooden batten for sofa set of five as per drg.

All as per serial item No. 59 above but for Bearer for sofa set of five as per drg.

S&F in replacement of 100mm thick cushion of cool foam of 32 density covered with best quality tapertry cloth duly stiched and cushion cover made out of best quality cloth one side zip as approved by GE, size 530mm x 500mm for sofa set of four complete (as per drawing No. FD-281) complete all as specified and as directed by Engineer-in-charge. Make : Kurl-on/Sleepwell/reliance

All as per serial item No. 64 above but for Leg for sofa set of four as per drg.

All as per serial item No. 64 above but for Arm for sofa set of four as per drg.

All as per serial item No. 64 above but for Wooden for sofa set of four batten as per drg.

All as per serial item No. 64 above but for Bearer for sofa set of four as per drg.

S&F plywood commercial 1830mm x 920mm x 12mm on bed ply top (as per drawing No. FD-246) after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 69 above but for head board panel

All as per serial item No. 69 above but for foot board panel

All as per serial item No. 69 above but for long rail

All as per serial item No. 69 above but for stiffener

S&F Mirror 5.5 mm thick 380mmx760mm with teak wood frame size to table dressing gents as per drawing No. FD-230 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge. Make:- Saint Gobain / Modiguard / Asahi India Glass Limited.

All as per serial item No. 74 above but for top & bottom made out of 12mm thick pre-laminated particle board ext grade.

All as per serial item No. 74 above but for back made out of 6mm thick plywood commercial SWR with kew plates.

All as per serial item No. 74 above but for drawers.

S&F in repair wooden planks of size 1800mm x 200mm x 20mm thick teak wood as in rack wooden of size 6' x 2' x 6' (as per Drg No. FD-78) complete all as specified and as directed by Engineer-in-charge.

S&F in repair wooden scantling of size 1800mm x 75 mm x 75 mm thick teak wood as in rack wooden of size 6' x 2' x 6' complete all as specified and as directed by Engineer-in-charge.

S&F Top of Table computer(3' x 2' x 4') of size 1145 mm x 600 mm made of 18 mm thick prelaminated particle board conforming to IS 12823-1990 and 4 mm thick teak wood edging all round after taking out old unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 80 above but for drawers

All as per serial item No. 80 above but for butt hinges of size 50mm

All as per serial item No. 80 above but for knobs 40mm x 40mm.

S&F Top of Table office officer wooden of size 1900 mm x 915 mm made of 19 mm thick prelaminated particle board after taking out old unserviceable one as per drawing no. WDF-32 complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 84 above but for drawer of size 340 mm x 140 mm x 360 mm teak wood.

All as per serial item No. 84 above but for knobs 40mm x 40mm.

M&L for two coats of French polish to old polished wooden furniture including cleaning and preparation of old surfaces of Chair easy cushioned as per drawing No. FD-358 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 87 above but for bed plywood top as per drawing No. FD-246.

All as per serial item No. 87 above but for chair writing as per drawing No. FD-280.

All as per serial item No. 87 above but for chair easy as per drawing No. FD-229.

All as per serial item No. 87 above but for chair dining as per drawing No. FD-279.

All as per serial item No. 87 above but for sofa set 4 seater as per drawing No. FD-281.

All as per serial item No. 87 above but for sofa set 5 seater as per drawing No. FD-281.

All as per serial item No. 87 above but for table dressing gents with mirror as per drawing No. FD-230.

All as per serial item No. 87 above but for Table 3'x2' without drawer (as per Drg No. FD-284)

All as per serial item No. 87 above but for Table 3'x2' with drawer (as per Drg No. FD-284)

All as per serial item No. 87 above but for table centre as per drawing No. FD-274.

All as per serial item No. 87 above but for Table dining 6/8 persons/JCOs (as per Drg No. FD-239/FD-273).

All as per serial item No. 87 above but for teapoy wooden as per drawing No. FD-278.

All as per serial item No. 87 above but for chair dining with long back as per drawing No. FD-357.

All as per serial item No. 87 above but for peg table as per drawing No. FD-384.

All as per serial item No. 87 above but for Chair dining cushioned as per drawing No. FD/MAP-II/04.

M&L for preparation of old painted surface almirah large steel (as per drawing No. FD-339, 1031) with shelves and applying two coats of synthetic enamel paint by spray machine (bush green & white) colour to the outside surface and internal surfaces complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 103 above but for Almirah medium steel with shelves as per drawing No. FD-243, FD-1032.

All as per serial item No. 103 above but for Charpoy MS tubing with ply top as per drawing No. CWE/Tez/04.

All as per serial item No. 103 above but for Locker bed side steel as per drawing No. FD-257,FD-1029.

All as per serial item No. 103 above but for Chair verandah as per drawing No. FD-256.

All as per serial item No. 103 above but for table steel 900 x 900 x 760 mm as per drawing No. FD-1009.

S&F Almerah brass lock 4 lever 40mm CP with duplicate keys for Almerah large steel with shelves (as per drawing No.- FD-1031) after taking out old one carefully and fixing at original positing including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 109 above but for three way locking device.

All as per serial item No. 109 above but for CP locking handle 125 mm for Almerah.

All as per serial item No. 109 above but for shelves for almirah.

All as per serial item No. 109 above but for legs.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

S&F Almerah brass lock 4 lever 40mm CP with duplicate keys for Almerah medium steel with shelves (as per drawing No. FD-243/FD-1032) after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 117 above but for Three way locking device.

All as per serial item No. 117 above but for CP locking handles 125mm for almerah.

All as per serial item No. 117 above but for leg.

All as per serial item No. 117 above but shelves for almerah.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

S&F CP handles for locker bed side steel with shelves (as per drawing No. FD-257 & 1029) after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 125 above but for 3mm thick stainless steel hasp and staple as per drawing.

All as per serial item No. 125 above but for leg as per drawing.

Repairs to dented door by removing the door from hinges making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

M&L for table top of table steel 900 x 900 x 760 mm without drawer as per drawing No. FD-1009 made out of 18/19mm thick pre-laminated particle board exterior grade one side teak and other side white with teak wood edging 19x4mm thick edging all around after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 129 above but for Side rails of size as per drg No. FD-1009.

All as per serial item No. 129 above but for legs made out of MS square tube of size 25x25x16 gauge.

S&F in repair PVC shoes of best quality for table steel of size 900 x 600 x 760 mm without drawer as per drawing No. FD-1009 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Taking down old unserviceable long rail of GI charpoy and provision of new GI pipe 32 mm dia, medium grade ISI marked long rail duly threaded 40mm at one end 22mm at other end and fixing complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge. Make: Jindal / TATA / Surya.

M&L for cutting existing unserviceable long rail retrieved from item No 133 above and converting into short rails as per existing pattern/design duly threaded 22mm at both ends and fixing the same after taking out old unserviceable short rail complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

M&L for cutting existing unserviceable short rail retrieved from item No 134 above and converting into legs all as per existing pattern/design and drawing duly threaded 22mm at one end and at other end 3mm thick plate, two Nos of 25mm dia and 40mm long ring made out of 5mm thick MS flat iron for MNF Set duly welded shall be provided and fixing the same after taking down unserviceable legs complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable three way elbow from the GI charpoy & provision of new three-way elbow 32mm dia. ISI marked and fixed as per existing design/pattern complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable check nuts from the GI Charpoy and provision of new GI check nuts 8 mm wide, 32mm dia ISI marked fixed as per existing design/pattern complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable nylon newar from GI charpoys, tightening the frame in original shape. supply and fixing of plywood 6'-6" x 3' x 12mm thick on charpoy GI pipe with nut, bolt, washer and flat iron 150 x 50 x 5mm thick 06 Nos including 12 mm thick half round teak wood edging all around the ply wood top finished with french polish complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable plywood from charpoy MS tubing Ply top supply and fixing of plywood 6'-6" x 3' x 12mm thick on charpoy MS Tubing with nut, bolt, washer as per drawing complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Taking out existing broken head board from charpoy and fixing new head board with 18 mm thick exterior grade prelaminated particle board both side laminated shade as approved by BSO/GE with 4 mm thick teak wood beading in matching shade with new screws, complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Taking out existing broken foot board from charpoy and fixing new foot board with 18 mm thick exterior grade prelaminated particle board both side laminated shade as approved by BSO/GE with 4 mm thick teak wood beading in matvching shade with new screws, complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Hard rubber shoes, complete all as specified and shown on drawing No. CWE/TEZ/04 and as directed by Engineer-in-charge.

Taking down old unserviceable plywood from charpoy GI pipe Ply top and Supply and fixing of ply wood 6'-6" x 3' x 12mm thick on charpoy GI pipe ply top with nut, bolt, washer and flat iron 150 x 50 x 5 mm thick 03 Nos as per drawing No FD-220 complete all as specified and as directed by Engineer-in-charge.

Re-canning to chairs of following types with cane plastic 2mm and 4mm half round premier make of white color on both seat and back as per godrej patern all as specified shown on drawing Nos. FD-279, 280, 229 & 256 complete all as specified and as directed by Engineer-in-charge. (a) Chair writing (b) Chair dining (c) Chair easy (d) Chair varandha Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

D.B ENTERPRISE

A K C PROJECT