Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹24.5 L+₹49,372.10 (2.06%)Rejected-Finance | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹24.8 L+₹82,156 (3.42%)Rejected-Finance C O GENERAL DAIRY VILLAGE BARAGAON SRI GANGANAGAR 335 001 | GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹24.9 L+₹95,753.50 (3.99%)Rejected-Finance 12 MARUTI NAGAR SIKKA HANUMAN MANDIR SIKKA SIKKA JAMNAGAR GUJARAT 361140 | JAMNAGAR | GUJARAT | 361140 | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹28.2 L+₹4.2 L (17.6%)Rejected-Finance | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
15 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
SPL REPAIR TO BLDG NO P-19 AND P-22 AT LGJ MIL STN
2023_MES_589846_1
8934-02/GE/23-24
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
As per tender document
8 documents required · 8 mandatory
₹500
Yes
GE Lalgarh Jattan
₹80,000
14 Aug 2023
17 Apr 2023
17 May 2023
17 Apr 2023
15 May 2023
1 May 2023
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.
M&L for Virified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shed polished, area of each tiles not exceeding 0.36 sqm, 13086 etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor all as specified and directed.
M&L for Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engneer -in-Charge
Demolition of cement concrete of any description(reinforcement cut as required to facilitate) and in any position not otherwise specifically provided for complete all as specified and directed.
Formwork to chajjas, troughs and similar items including edges , for rough surface of concrete, complete all as specified and directed by Engineer-in-charge
M&L for reinforced cement concrete 1:1.5:3 type A-1 using 20mm graded stone aggregrate in Chajjas; complete all as specified and directed by Engr-in-charge. Note : Reinforcement shall be measured and paid seperately.
S&F for TMT bars (Fe-500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
Taking down cement plaster/terrazoo on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed
M & L for Rendering 10 mm thick on brick work or concrete surfaces in CM 1:4 finished even and smooth on ceiling and smooth without using extra cement all as specified and directed by Engr-in-charge.
M & L for Rendering 10 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth on wall and smooth without using extra cement all as specified and directed by Engr-in-charge.
M & L for Rendering 15 mm thick on brick work or concrete surfaces in CM 1:6 finished even and smooth on wall and smooth without using extra cement all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair complete all as directed.
M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even without using extra cement complete all as specified & directed by Engr-in-charge.
M&L for preparation of old plastered and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered and treating with two coats of weather proof exterior emulsion paint (Apex ultima or equivalent) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.
M&L for two coats of acrylic distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment and two coats of acrylic distemper over 3 mm thick wall care putty on plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L preparing newly or pointed surface of wall and applying three coats of white wash on walls complete all as specified & directed by Engr-in- charge
M&L for preparation of old plastered or pointed surfaces by complete removal of exiting treatment of wall and applying two coats of white wash complete all as specified and directed by Engineer-in-charge.
M&L preparing newly plastered or pointed surface of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engr-in-charge
M&L for preparation of old plastered or pointed surfaces by complete removal of exiting treatment of wall and applying two coats of white wash complete on ceiling all as specified and directed by Engineer-in-charge.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
Dismantling of brick tiles in floor or roof laid dry and pointed in cement mortar complete all as specified and as directed.
Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed.
M&L for Roof treatment to RCC roof as follows:- (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:3) with WPC, finished even and smooth without using extra cement. (c) Providing one coat of approved bituminous primer @100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP membrane reinforced with non woven polyster fabric, by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by E-in-Charge. Make : STP Dr Fixit/Pidilite, Texsa India Ltd/Tikitar Dansona/Bengal Bitumen Notes : (i) All joints and change in directions should be covered wih cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/as per site reqmt and cured well before laying membrane by torching.(ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only. The name of firm shall be got approved from GE before carrying out the wk. (iv) The independent testing of membrane for technical parameters given in particular specifications shall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarnatee of treatment shall be for min 10 yrs reckoned from date of completion of whole wk.
M&L for 50 mm thick cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) as in roof padding and laid in slope 1:40 complete all as specified.
M&L for 40 mm thick cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) as in roof padding and laid in slope 1:40 complete all as specified.
M&L 40mm thick brick tiles laid flat on lime concrete & joints grouted flush in cement mortar (1:3) bedded in 15mm th cement morter (1:6)mixed with 5% of crude oil by weight of cement on lime concrete complete all as specified and directed by Engr-in-Charge.
All as per item No 34 above but except tiles
M&L for flush pointing in CM 1:3 to bricks laid flat on brick tiles in roof all as specified and directed by Engineer-in-charge.
M&L PCC 1:2:4 type B-1, using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed
Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed
Taking down shutter of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed.
Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)
S&F for powder coated aluminium frame/shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by Engr-in-Charge. Make of Al Section : Jindal / Hindalco / NALCO
S & F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed Note : Minmum thickness of poder coating should be 50 microns.
S & F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge.
S & F 4 mm thick figured glass, pin head oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufaturers all as specified and directed.
S&F for powder coated anodised aluminium grill size of mesh 75mm x 75 mm and 8 mm thick section using U channel 25 x 12 mm complete all as specified & directed.
Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required built in colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.
Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.
S&F framed work as in chowkats of doors windows of angle iron ,gates or other section with gusset plates, rails, braces etc conforming to Gde Fe 410-0 or Fe 310-0 complete (Quality -A) all as specified and directed by Engr-in-Charge.
S & F hold fast of flat iron conforming to Fe-290 or Fe 330 including preparing the surfaces & treated with two coats for coaltar & sanded with clean sharp sand complete all as specified & directed.
Supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (Two panels) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed
S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
S&F 100 mm long butt hinges extruded aluminium alloy with galvinised mild steel hinge pin, anodised and fixed type B-21 complete all as specified & directed by Engr-in-charge.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified & directed by Engr-in-charge.
S&F aluminium handles anodised cast type 125 mm long all as specified & directed by Engr-in-charge.
S&F 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-charge.
S&F for 100 mm long butt hinge, medium weight, cold rolled mild steel all as specified and directed.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed all as specified & directed by Engr-in- charge.
S&F as 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.
S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.
,--ditto--- all as per Serial item No 61 above, but in repair
S&F for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.
M&L preparation of new or perviously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.
M&L for preparation of old or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint all as specified.
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, including preparation of previously untreated surfaces and one coat of red oxide and finish with two coats of synthetic enamel paint ordinary tint all as spefified and directed
M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, including preparation of new surfaces applying with two coats of synthetic enamel paint over coat of red oxide primer ordinary tint all as spefified and directed
S&F drapery stainless steel rods, standrad quality, not less than 25mm dia with heads, etc. complete all as specified and directed by Engr-in-charge.
S&Fin repair vitreous china wash down water closet pan (pedestral pattern), white (excluding fixing bolts ,flushing cistern and flush pipe), including pedestal pan and trap,including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etccomplete.
S&F In repair plastic water closet seat, white closed pattern with flat bottom,and cover and mild steel chromium plated or aluminium hinging device seat and cover for water closet (European type) complete all as specified.
S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and telescopic pipe and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.
S&F in repair vitreous china wash hand basin coloured counter top (pedestal pattern) of size 560x450mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/trap all as specified .
S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified.
S&F in repair concealed stop cock 15mm bore cast copper alloy cromium plated fancy type, screwed down, high pressure with capastan head, screwed both ends for iron pipe or for union complete all as specified and directed by Engneer -in-Charge Note : Min weight of tap should be as per SSR Part-I
S & F in repair bib tap 2 way double handle with flange, fancy type, cast copper alloy, chromium plated, with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed suitable for 15 mm bore iron pipe complete all as specified & directed by Engineer-in charge Note : The minimum weight of tap shall be as given in SSR or in relevant IS
S & F in repair of center hole wash hand basin mixer with 450 mm long braided hoses system, brass (cast copper alloy) chormium plated, mixer for mixing hot & cold water suitable for wash hand basin, screwed down for iron pipe 15 mm bore including taking down old valve any type complete all as specified and as directed by Engineer-in - charge Note : The minimum weight of valve shall be as given in SSR or in rellevant IS
S&F in repair angle valve/stope cock/stop valve fancy type, cast copper alloy, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, size 15 15 mm bore complete, all as specified & directed by Engineer-in charge Note : the minimum weight of tap shall be as given in SSR or in relevant IS
S&F in repair brass chormium plated overhead shower 70 mm dia round shape single flow (ABS Body chrome plated with gray face plate) with rubit cleaning system with 240 mm arm & flange including fixing to 15 mm bore pipe complete all as specified and as directed by Engineer-in -charge ( Make : JAQUAR) (Shower Model No : Allied Cat No -EOS-491 & Make : JAQUAR, Arm Modle No -ALE-536A)
S & F in repair of wall mixer with "L" bend 115 mm long full system brass ( cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for bathing, screwed down for iron pipe 15 mm bore including taking down old valve any type complete all as specified and as directed by Engineer-in -charge Note : the minimum weight of valve shall be as given in SSR or in relevant IS.
S&F in repair chromim plated fancy type health faucet with 1 mtr tube & hook complete all as specified and directed by Engneer -in-Charge
&F in repair stainless steel chromium plated jet spray (butter fly or ''L'' bend) suitable for EWC including 1m tube and necessary nut bolts complete all as specified and as directed by Engineer-in-charge.
S & F in repair brass chromium plated liquid soap dispenser including fixing to 15 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repair glass corner shelf 200 mm with Abs brackets complete all as specified and directed by Engineer-in-Charge.
S & F in repair brass chromium plated PEG Set 6 including fixing to 15 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
S&F in repair chromium plated fancy type soap dish complete all as specified and directed
S&F in repair stainless steel Trap with grating round or square 150mm size (minimum weight 100gms) complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long.
S&F 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors all as directed.
S&F in repair tubular towel rail stainless steel 20mm dia 'D' type 60cm long between flanges complete all as spd & dir by EIC.
Dismantling of old water tank polythene water storage tank 1000 ltr capacity vertical with closed top hoisted in SSR part-I. All as directed.
S&F 1000 litre capacity ISI marked rotational moulded tripple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.
S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair all as specified and as approved by GE/Engineer-in-Charge.
S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (minimum weight 15mm-142 gms/20mm-210 gms/25mm-455gms)
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe all as directed.
All as per item No 95 above but 20 mm dia pipe
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
All as per item No 97 above but 20 mm dia pipe
Fixing only 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
S&F 20 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.
Taking down eaves gutters and rainwater pipes (any size or any pattern), including all fitting, such as heads, shoes ,bends swan-necks etc, including cleaning or refixing or removal to store etc. complete all as specified and directed by Engr-in -Charge.
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls and including bend as per side requirement, taking down existing pipe all as directed.
M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones of size 300 mm x 300 mm x 300 mm x 100 mm with plain fair faces, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed.
M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.
M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with over Fazilka sand cushion all as specified and directed. (Sand will be measured and paid seperatly)
Suply only 25 mm thick Fine aggregate (sand) for Cushioning (Fazilka sand) all as specified and directed
Dismantling of cast iron pipes, jointed in cement mortar and taking out of trenches/wall if required upto 100mm dia complete all as specified and as directed by engineer-in-Charge.
Dismantling of cast iron pipes, jointed in cement mortar and taking out of trenches/wall if required upto 75 mm dia complete all as specified and as directed by engineer-in-Charge.
S & F 100 bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.
S & F 75mm bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and fixed to wall complete all as specified and directed.
Fixing only 100 bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast iron complete all as specified and directed.
Fixing only 75mm bore of spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and fixed to wall complete all as specified and directed.
M & L in repairs 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) using 20 mm grade stone aggregate complete all as specified and directed by Engineer-in-Charge.
S & F in repair cast iron 100 mm dia branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S & F in repair 75 mm dia of cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches and Oval access door complete all as specified and directed
S & F in repair 75 mm cast iron sanitary connections-short connections pipe of length upto 300 mm with socket fixed complete all as specified and directed by Engineer-in charge
S & F in repair 100 mm cast iron sanitary connections-short connections pipe of length upto 300 mm with socket fixed complete all as specified and directed by Engineer-in charge
S & F cast iron 75 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S & F cast iron 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S & F cast iron 110 mm bore vent cowl complete all as specified and directed.
S & F cast iron 75 mm bore vent cowl complete all as specified and directed.
Supply & fixed Clamp for hanging/ fixed of 75mm/100mm hubless pipes complete all as specified and directed by Engineer-in-Charge.
M & L for complete removal of existing treatment and applying two coats of cement base paint on walls over a coat of alkali restant primer on wall surfaces all as specified and directed
Excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n.exc 1.5 m in depth and getting out in getting out in sof / loose soil all as directed.
Removal of excavated surplus spoil to a distance n.exc 50m and deposting where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-chargeq
Returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm any type of soil complete all as specified and directed by Engineer-in-Charge
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in benching / haunchig of manholes including forming channels including necessary formwork etc.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregates as in coping and the like including weathering slightly rounded or chamfered angles and throating, as directed including necessary formwork etc.
M&L precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs (for manholes etc), chajjas, shelves and similar articles with plain faces all as directed
M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge.
M&L for old size brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.
Supply and laying DWCPE (SN8) 150 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches and including over 100 mm moorum bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge. Note: DWCPE pipe should be ISI marked as approved by Engr-in - Charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.
M&L for preparation of new plastered or pointed surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified & directed by Engr-in-charge.
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in cement mortar 1:6, all as specified and directed.
M & L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed
M&L for continous brick edging; with fly ash bricks old size bricks, with width equal to the width of the brick; liad dry on end vertically complete all as specified and directed by Engr-in-Charge.
Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by engineer-in-Charge.
M&L 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) bedded in 15mm th cement morter (1:6) mixed with 5% of crude oil by weight of cement on tiles complete all as specified and directed by Engr-in-Charge.
S & F for Pressed steel frames size of frame 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engneer -in-Charge .
S & F for Pressed steel frames size of frame 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engneer -in-Charge .
S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as directed.
S&F 4.0mm sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane incl hacking out old brocken glass of any description complete all as specified and directed by Engr-in-charge.
S&F in repair steel ventilator with top hung shutter including highes, steel peg stay complete all as specified and directed
S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
,--ditto--- all as per Serial item No 146 above, but without glazing bars
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or grade E- 165 complete all as specified and as directed
S&F in repairs for stainless steel rods, standarad quality, not less than 28mm dia with heads, brackets and boths ends stainless caps , etc. all as specified and direced.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge.
S&F in repair aluminium hat pegs, solid body, 125 mm to 175 mm (4 legs) complete all as specified and directed by Engr-in-charge.
S&F repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including CI 'P' trap set in and including concrete fixed all as specified.
S & F in repairs pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed. (Wt not less than 450 gms)
S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed all as specified.
S&F in repair CP brass stop valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup (Concealed type) fixed complete all as specified and directed by Engr-in-charge.
S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint complete all as specified and directed by Engr-in-charge.
Dismantling exc 250 but n. exc. 500 litre capacity any type of water tank and remove from site complete all as specified and directed by Engineer-in-Charge.
S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in SSR part-I. All as directed and including 20 mm bore PTMT float valve and connection nipple as required basis complete all as specified and directed by Engineer-in-Charge. .
Supply & fixing in repair 100 mm bore cast iron (spun cast) pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge.
Supply & fixing in repair 75 mm bore cast iron (spun cast) pipe waste and vent pipe in any length with or without ears laid in trenches/floor/wall including clamps, jointing with necessary coupling complete all as specified & directed by Engr-in-charge.
Preparation of newly primed surface of steel over 2 coasts of synthetic enamel paint over 10 cm width or girth not specified otherwise complete all as specified and directed
M & L for rolled mild steel, roof trusses (framed), trussed, Purlins, crane gantries, rail and fastening and heavy bracket (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc conforming to Fe 410-W (Gd E-250) quality-A complete all as specified and directed.
M & L for old size brickwork with sub class 'B' bricks, straight or mean radius built in 1:4 complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as directed.
S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
E/M Portion Taking down carefully unserviceable point wiring (light, fan, socket, bell, power etc) complete including (fittings such as switches, ceiling roses, pendants, regulatos, sockets, Bell, Bell push etc ), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.
Taking down unserviceable MCB DB with sheet metal enclosure, main switch, DB etc any type & make and making good disturbed surfaces to match with existing surfaces.
Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces
M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with modular sheet top cover of required module for mounting switches, sockets etc complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour for One Light point controlled by one, one way switch complete all as specified and directed by Engr-in-Charge. .
,--ditto--- all as per Serial item No 170 above, but for One ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 170 above, but for One bell/buzzer point controlled by one bell puch complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 170 above, but for One 3 pin 5 amps switch socket outlet point on same board with other switches complete all as specified and directed by Engr-in-Charge.
,--ditto--- all as per Serial item No 170 above, but for One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.
,---ditto-- all as per item No.170 above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathed copper conductor earth wire for two in one 5 pin 15 Amp socket outlet on indep board.
Supply and fix Modular switch 1way 6A, 1 Module, 230 Volts grade all as specified and directed by Engineer-in-Charge
Supply and fix Modular socket 1 way 6A-2/3 pin combine 2 Module, 230 Volts grade all as specified and directed by Engineer-in- Charge
Supply and fix Modular socket 6A/16A-2/3 pine combined 2 module all as specified and as directed
Supply and fix 1 way 16 Amp 1 module all as specified and directed by Engineer-in-Charge.
S & F LED light fitting 1 x 20 W, 230 V integral sleek polycarbonate LED Channel with white acrylic cover incl making connection complete.
Supply & fix Modular Bell push switch 6A, 1 Module all as specified and directed by Engineer-in-Charge
Supply & fixing bell AC 230 volt single pole all as specified & directed by Engineer-in- charge.
Supply and fix ceiling rose surface bakelite two to three terminals/plate 5 amps complete all as specified and directed by Engr-in-Charge.
Supply and fix Modular fan regulator, 120 W-2 module with step suitable for 1200/1400mm sweep ceiling fan working on 230 volt AC complete all as specified and directed
Supply and fix in replacement Vertical MCB DB distribution box 3 phase TPN 4 ways double door with bus bar rating 200 Amps vertical type dust and vermin proof complete all as specified and as directed.
Supply and fix sheet metal enclosure DB single pole and neutral for 240 volts 4 way with 200 Amps rated busbar flush/surface mounting double door complete all as specified and directed
Supply and fix MCB SP 240 volt 10 amp 10KA complete all as specified and as directed.
Supply and fix MCB SP & N 240 volt 40 amp 10KA complete all as specified and as directed.
Supply and fix MCB SP 240 volt 32 amp 10KA complete all as specified and as directed.
Supply and fixing PVC Blanking Plates one way with internal lock complete all as specified and as directed.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volts Complete all as specified and directed by Engr-In-Charge
Supply & Fix Mirror light 10 watt, insulated body wtih back plate etc all as specified and as directed by Engineer-in-Charge
Supply & Fix exhaust fan, steel body AC single phase 230V of size 450 m sweep with blades and frame and louvers all as specified and directed by Engineer-in-Charge
Supply & fix fresh air fan 200 mm sweep, single phase 230v 50 Hz including grouting with fasteners, nuts/bolts etc complete all as specified and directed by Engineer-in-Charge
Supply & fix LED building security light fitting 25 watt with epoxy powder coated sheet aluminum housing, with epoxy powder coated CRCA sheet steel gray tray, clear acrylic cover and accesories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 02 seats of FI clamps made out of 30 x 5 MS flat & nuts, bolts & washer inclufing painting to clamp with two coats of aluminum silver paint over a coat of primer after taking down old u/s one
Supply and fix LED post top 40 watt made in cast aluminum spigot housing with decorative clear opal acrylic diffuser and IP 65 protection complete including fixing arrangement complete all as specified and as directed
Supply and lay, jointing and testing cable 1100 volt grade 25 Sqmm 3.5 Core with standared aluminum conductor PVC sheathed armoured confirming to IS 56 laid in trenches/along poles/ through pipe/ through duct completed all as specified and directed
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
M/s Tarun Traders
PAREEK AND COMPANY
SHIVA CONSTRUCTION COMPANY
GOYAL ENTERPRISES
Akarsha Enterprises
Aggarwal brothers and company
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .