CERTAIN REPAIR TO FLOORING ,PIUMBING , LEAKAGE AND SEEPAGE, DRAINS AND CERTAIN MISC ALLIED WORK AT CGDHQ-10 UNDER GE (I) CAMPBELL BAY.

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each complete all as directed.

Supply and fixing of solid panel PVC door shutter 30mm thick (style) consisting of frame made out of Ms tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed. Make - Rajashree

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19 x 19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. Make - Rajashree

Taking down chowkats or frame with shutters (without taking off shutters from the frame), exceeding 1.5 sq. m but not exceeding 4.0 sq. m each complete all as directed.

Supply and fixing of 35mm thick, 2nd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial veneers supplied and fitted to chowkat all as specified and as directed by Engineer-in-Charge.

Supply and fixing of 2nd class HW, 35mm thick glazed and skeleton shutters, open rebated and rebated and prepared to receive glass or gauge etc., without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for screwing glass / gauge etc., sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) all as specified and directed.

Supply and fixing of 2nd class HW plain, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 sq. m each all as specified and as directed

Supply and fixing of flush shutters, 25 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Supply and fixing of Hasp and staple, 75 mm long safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

Supply and fixing of wind ties format including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work confirming to Fe 290 Gde E-165 all as specified and as directed.

Supply and fixing of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing of Anodized aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified and directed by Engr-in-charge.

Supply and fixing of Anodized aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fixing of 100mm size SS hinges, medium weight, cold rolled mild steel, and fixed wooden door shutter complete all as specified and directed.

Supply and fixing of Stainless Steel butt hinges 75mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and directed.

Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing of 300mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Material and Labour for extruded aluminium alloy handles 150mm, fabricated type, anodized complete all as specified and directed.

Material and Labour for aluminium anodized barrel tower bolt of extruded section length of bolt 150mm complete all as specified and directed.

Material and Labour for aluminium anodized barrel tower bolt of extruded section length of bolt 100mm complete all as specified and directed.

Supply and fixing in repair aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

Supply and fixing at site wood grain printed PVC sheet, 5 mm thick fixed or laid on to aluminium doors by using rubber based adhesive, as per specification used instead of Plain colour PVC sheet all as specified and as directed by Engr-in-charge.

Supply and fixing of Anodized aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-charge.

Supply and fixing of Anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.). Hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

Supply and fixing in repairs 25mm dia stainless steel curtain rail fixing with bracket to required length complete all as specified and directed. Note : rate included for side bracket and fixing complete

Hacking out old broken unserviceable glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

Supply and fixing of 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing of 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including brackets, waste couplings 32mm dia, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Supply and fixing in repairs, vitreous china squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush type) with and including connection to trap, set in and including concrete but connection to flushing pipe, anti syphonage pipe etc., complete including making good to floor, connection to drain (or out going pipe) etc., complete all as specified and as directed by Engineer-in-Charge (Make : Cera/Johnson/Parry Ware).

Supply and fixing in repair European type WC (Pedestal Pattern) complete including pedestal pan and trap including connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed.

Supply and fixing in repairs PVC valve less, syphonic action type flushing cistern, 10 litres, low level, white with inlet ball valve, float and handle including brackets complete all as specified and directed.

Taking up or down steel water tubing and connection 15mm dia complete all as specified and as directed.

Supply and fixing of tubes, medium grade 15mm dia bore galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Refixing of old steel tubing obtaining from taking down and connections new or old position (wall, ceiling, floors etc.,) of 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connection 20mm dia complete all as specified and as directed.

Supply and fixing of tubes, medium grade 20mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old steel tubing obtaining from taking down and connections in new or old position (wall, ceiling floors etc.,) of 20mm bore complete all as specified and directed.

Supply and fixing of 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 laid in trenches complete all as specified and directed.

Supply and fixing in repairs angle stop cock 15mm bore, fancy type, chromium plated (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

Supply and fixing in repairs bib tap 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly screwed for iron and fixed complete all as specified and directed.

Supply and fixing in repairs pillar taps fancy type, cast copper alloy, with capstan head as chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and ply nuts screwed for iron pipes and fixed complete all as specified and directed.

Supply and fixing in repairs 32mm size waste couplings of PTMT (half or full threaded) minimum weight 32mm 45gms complete all as specified and directed.

Supply and fixing in repairs towel rail 450mm long of Stainless Steel fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 170gms) complete all as specified and directed.

Supply and fixing in repairs swivel shower of PTMT any coloured for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and directed.

Supply and fixing in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

Supply and fixing PVC connections 15mm size 600mm long with PTMT nuts complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall mixed with water proofing @ 2% by the weight of cement, finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only Integral water proofing compound

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and directed.

Material and Labour for preparation of new surfaces of wall and applying two coats of oil bound distempering over one coat of primer including chalk whiting complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and as directed.

Material and Labour for preparation of new or previously untreated wood surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over one coat of pink primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

Material and Labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410 -W (GdeE- 250) quality A all as specified and directed.

Material and Labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Material and Labour for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of Concrete in ground floors and paving’s not exceeding 15 cm thickness (below or above ground level) all as directed.

Material and Labour for PCC.1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete for drains all as specified and directed.

NOTE : An Amount of Rs 69,755.00/- towards Schedule of Credit shall be deducted to arrive the Contract Sum

M/S PANNER SELVAM

T.M.RAMANATHAN AND SONS

MAHESWARI CONSTRUCTIONS

B.R. ENTERPRISES

V CHINNA DURAI

Govinda Swamy Construction

Y Abulu