SPL REPAIR TO BLDG NO M-1 (CENTRAL MI ROOM) WITH CONNECTED SERVICES INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

(B/R PORTION) Taking down cement plaster in any description on brick or stone wall etc incl racking out joints. Hacking for key scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface on external surfaces in CM (1:4) & water proofing compound mixed with second layer @ 250 ml/Bag or as per manufacturer instruction finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separately.)

Supply only integral water proofing compound all as specified and as directed.

M&L for 15 mm thick rendering in CM (1:6) on other than fair face of brick or concrete surfaces on internal surfaces finishing even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:3 on ceilings finished even and smooth without using extra cement (up to ceiling height of 6 to 7m )incl necessary arrangements for execution of the work) all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins arches pillars etc complete all as specified and directed.

M&L for brick work with flyash bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L brick work with flyash bricks, (with Old Size Bricks),straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Forming jambs etc openings etc including cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing work built in cm 1:6 complete all as directed by Engr-in-charge.

Making good under cill or over arches, lintels including all pinning in with cement mortar 1:4 complete all as directed by Engr-in-charge.

Demolition of reinforced cement concrete of any description for Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended slabs complete all as specified and directed.

Formwork Use and waste to sides and soffits and suspended slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed.

M&L For RCC 1:2:4 type B1 20 mm graded as in chajja supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick water proof wall care putty complete all as directed .

M&L for preparation of new wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick water proof wall care putty complete all as directed.

M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying two coats of oil bound distemper to new plastered surfaces of ceiling including preparation of surface complete all as specified and directed .

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L applying one coats of synthetic enamel paint on old painted surface wooden surfaces of any description over 10 cm width or girth complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M & L applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth complete all as specified and directed.

M & L Preparation of old treated/ painted surfaces of walls and soffits of Chajja, roof slab etc, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blade/ scraper as applicable to make the surface free from loose paint, algae formation dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying two coat of weather proof exterior emulsion paint over alkali resistant primer over 1-1.5 mm thick wall care putty of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

M & L Preparation of new surface of walls and soffits of Chajja, roof slab etc, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blade/ scraper as applicable to make the surface free from loose paint, algae formation dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 2mm thick exterior wall putty ( in two layers) for smooth finish and finishing with two coat of weather proof exterior emulsion paint over alkali resistant primer over 1-1.5 mm thick wall care putty of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

Demolition of cement concrete (un-reinforced) not exc 15cm thick in ground floor and paving (below or above ground level) complete all as specified and directed.

M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

Dismantling of loose concrete from RCC members to shape 50 mm for receiving polymer modified member/micro concrete etc all as per manufacturer instruction (Measurement shall be surface area of member).

Cleaning rust from rusted steel bar by using Rebaklens RR rust remover & wire brush : Rust remover cleaning rust from rusted reinforcement bars by using acid base Rebaklens RR rust remover painted with brush and removing rust with flex, (after 24 hrs of application of rust remover) with the help of wire brush, sand paper or any other suitable devices and thoroughly washed with water with the help of pressure jet and allowing it dry complete all as per manufacturer instruction of Make : Forsook/Sikka. (only area of cleaned steel bar shall be measured for payment).

Anchoring system for rebaring by normal steel bar :- Rebaring by normal steel bars : introducing new reinforcement bars for structural connections in RCC, fixing the reinforcement in position using Hilti HY 150/ Fosroc Lock fix E 75 chemical (Rate shall include cost of labour, epoxy cartridges, plastic nozzles etc complete including cleaning the drilled holes of loose dust by blowing air, all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka. (The cost of reinforcement shall be payable separately).

Coating applications Anti Corrosive coating for corroded reinforcement & newly added steel bar :- Providing mixing and applying over reinforcement bars Nitozinc primer antirust agent all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka (Dosage/coverage as per manufacturer specification of two component epoxy based zinc rich primer steel as a protective coating to steel reinforcing bars in concrete with total zinc content in dry film > 90% by volume and DFT per coat>50 microns).

Material and labour for providing and applying bonding agent of approved brand Fosroc Nitobond EP (Std) coverage and all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka. (Mixed density : 1.48Kg/ltr, adhesive bond strength to be >2.50 MPs) epoxy bonding agent.

Polymer modified mortar Rendroc SP 40 for patch repair :- M&L polymer modified concrete upto 25 mm thick application Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar, specifically of PMC (Free flowing non shrink repair and could get compressive strength of 35 Mpa at 28 days including plaster and all as per manufacturer instruction and work will be carried out by manufacturer rep only of Make Fosroc/Sikka.

Dismantling Structural steel wok incl grills ,gates, stair case etc but excluding framed truss in any position complete all as specified and directed.

Fixing only old Joist, channel angle of beams etc cutting with suitable size complete all as specified and directed.

S & F mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L mild steel rolled sections as in main and cross beams, angle, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors etc conforming to grade Fe-410- W (Gde- E- 250) quality- A made to required shape and size, welded at joints complete all as specified and directed.

S & F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including necessary form work complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfast or pipes and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick, etc complete all as specified and directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed.

S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed.

S&F in repair 100mm CI bends any radius complete all as specified and directed.

S&F in repair 100mm CI 'T' any radius complete all as specified and directed.

S&F 100 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F 100 mm bore Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic colour tiles of area of each tile exc .06 Sqm but n exc exc .11 Sqm and 6 to 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed. all as specified and directed.

M&L Verified ceramic joint free colour tiles area of each tile exc 0.18 Sqm but n exc exc 0 .36 Sqm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed. all as specified and directed.

M&L non skid ceramic colour tiles of area of each tile exc .18 Sqm but n exc exc .38 Sqm and 8-10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed. all as specified and directed.

M & L glazed ceramic colour tiles size 600 mm x 300 mm x 6 to 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement including 10 mm thick plastering in cement mortar 1:4 complete all as specified and directed. to match complete all as specified and directed.

Supply and Fixing PVC solid wall lining consisting of 5 mm thick plain colour PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction) directed.

Supply and Fixing PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall paneling inclusive of fixing as in grid / frame on wall at a distance .6m horizontal & vertical for wall lining/paneling as per specification of manufacturer and as directed.

S & F 10 to 12 mm thick gypsum board false ceiling including 0.55 mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, fixed to surrounding wall using nylon sleeves and screws @ 450mm centre to centre / GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended from the soffit of roof slab/ truss @1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fasteners with and including ceiling section ( not exc 1.2 metre length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre with necessary nuts and bolts and gypsum board screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry bedded complete all as specified and directed.

M & L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and columns in floor, roof landing,, balconies, conopies, deck slab and shelves etc complete all as specified and directed.

M & L 18 to 20 mm thick machine cut one side polished natural hard stone (Granite)any type in step, jambs, pillars, window cills, cooking plate from and similar places etc like in 10mm thick screed bed cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed.

Supplying and installing curved/arch uPVC- Fixed windows made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 52mm x 33mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, atherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-201

Supplying and installing rectangular uPVC- Fixed windows made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 52mm x 33mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, eatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001

Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having three tracks and three sashes (shutters) and one fly screen sash with frame dimension of 137.5 mm x 49mm and sash dimension of 61mm x 47mm x 37 mm and fly screen sash dimension of 32mm x 58mm with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years.

The profiles should conform to BSI Quality Management System ISO 9001Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having three tracks and three sashes (shutters) with frame dimension of 104mm x 49mm and sash dimension of 61mm x 47mm x 37mm each with middle sash fixed with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery in Ist quality (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and also scaffolding if required for fixing is deemed to include in the rate quoted. Make Kommerling or equivalent in other makes.

Supplying and installing rectangular uPVC louver windows with fixed and exhaust made out of lead free green profiles having a worldwide presence with a GREENLINE mark with frame dimension of 58mm x 36mm for windows with aluminium powder coated framework and glass blades for louvers with corners fusion welded, fully reinforced with Galvanized steel of 1.2mm . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised local fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside of Dowcorning / GE or equivalent. Scaffolding if required will be charged at actuals. The profiles should be of an international brand having factories in multiple countries and having a warranty of 20 years. The profiles should conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 (with glass).

S & F stainless steel butt hinges,100 mm long complete all as specified and directed.

S & F aluminium handles 150 mm long cast type, anodised complete all as specified and directed.

S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed.

Supply & Fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed.

S&F 5.0 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes all as specified and directed.

S&F 10.0 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes all as specified and directed.

S & F 4.8 mm thick Frosted plain glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002) or equivalent model in make as specified in tender.

Supply and fix vitreous china wash basin, white, counter top, size 450 x 400 mm oval shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed .

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043) or equivalent model in JAQUAR / CERA / PARRYWARE HINDWARE/PARRYWARE) or equivalent model in make as specified in tender.

S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-273KNUPR / PRAYAG, Cat No: 9275 / CERA, Model: OCEAN / PARRYWARE, Cat No: G1417A1 / HINDWARE, Cat No: F200020 / ESS ESS, Cat No: C-216) or equivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) or equivalent model in make as specified in tender.

S&F in repair 15mm dia fancy type chromium plated basin mixer foam flow screwed for iron pipe incl taking down old all as directed by Engr-in-Charge. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS) or equivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) or equivalent model in make as specified in tender.

S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP) or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) or equivalent model in make as specified in tender.

S&F Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 or equivalent model in JAQUAR / PARRAYWARE) or equivalent model in make as specified in tender.

S&F toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003) or equivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) or equivalent model in make as specified in tender.

S&F vitreous china floor mounted coupled closet (Pedestal pattern) white including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed.

S&F corner glass shelf 200 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102)or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) or equivalent model in make as specified in tender.

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, racking out joints, hacking for key scrubbing down with water etc including dismantling of lightening strip and refixing the same in position, and removing rubbish out from MD land, all as directed. (Note :- Dismantling and refixing of the lightening strip is deemed to include in the rate quoted if any).

M & L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface all as directed.

M & L PCC type B1 (1:2:4) (using 20mm graded stone aggregate) 50mm average thickness for padding concrete on roof surfaces, all as specified and directed.

M & L for screed bed 15 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed (Water proofing compound shall be measured and paid separately).

M & L preparation of horizontal or vertical surfaces for water proofing treatment with providing 3 mm thick, APP based polymeric membrane weighing minimum 3.0 Kg/Sqm reinforced with polyster non wove fabric (weight not less than 150 gm /Sqm over a coat of blown grade hot bitumen 85/25 @ 1.20 Kg / Sqm, all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.

M&L for preparation and applying solar reflective bituminous aluminum paint exceeding 10 cm in width or girth over APP membrane @ 0.20 kg/sqm complete all as specified.

Supply only integral water proofing compound all as specified and as directed.

M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M & L for Disconnecting existing water tanks capacity exc 250 ltr n exc 500 ltr , setting aside (or lowering if required) for cleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed.

M & L for Disconnecting existing water tanks capacity exc 500 ltr n exc 1000 ltr , setting aside (or lowering if required) for cleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed.

Taking down steel water tubing and connections, including cleaning or remove to store all as specified of following size.

15 mm dia

20 mm dia

25 mm dia

S&F Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

15 mm dia

20 mm dia

25 mm dia

(E/M PORTION) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed.

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (a) One light point or one fan point or bell point controlled by one switch or bell push.

All as per item No 104 above but for one 5amp switch socket combination on independent board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No 104 above but for one 5amp switch socket combination on same board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 104 above but using 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 1.5 sqmm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting modular type switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage) (a) One light point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One 3/5 pin socket outlet, 5 Amp on the same board with other switches

All as per item 108 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuity wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches.

All as per item No 108 above but using 4.0 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 4.0 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.

S & F Modular Bell push 6A, 1 module complete all as specified and directed.

S & F Modular Blank plate, 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 2 module complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and directed.

S & F Modular type White cover plate with frame 6 module complete all as specified and directed.

S & F Modular type White cover plate with frame 8 module complete all as specified and directed.

S & F Modular type White cover plate with frame 12 module complete all as specified and directed.

S & F Modular type Metal Flush box 1/2 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 6 module complete all as specified and directed.

S & F Modular type Metal Flush box 8 module complete all as specified and directed.

S & F Modular type Metal Flush box 12 module complete all as specified and directed.

S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.

S & F Switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.

S & F Bell push, flush type, 5 amp complete all as specified and directed.

S & F Switch socket combination 5A/ 16A, 5 in 1flush type complete all as specified and directed.

S & F Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

S & F Bell , AC, 230 Volts, single pole complete all as specified and directed.

S & F Musical Call Bell as per sample approved and directed by Engineer-in-Charge.

S & F stepped type electronic fan regulator flush type complete all as specified and directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.

Taking down Repair/ Re fixing LED lights fitting any type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,W/NW light AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repair LED Ceiling light fitting 35/36W recess type as in repair , minimum colour temperature 6500K lumen should greater >110 with suitable driver complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

S&F in repair picture LED lights with color temperature 3000 K suitable for 10 W metal and synthetic material lumen 500 lm Model: 48043/30/86 Make: Philips or equivalent of havells complete all as directed.

S & F in repair LED wall mounted spot focusing light fitting 9 above watt, colour temperature 2700K, mounted on wall / ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed. Make: Philips Cat No 56240/31 or equivalent model in other make specified in tender.

S & F LED decorative Wall lights fitting 4 W x 2, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable E-14 LED 4w X2 complete all as specified and directed. Make: PHILIPS 32033/11/66 Aquafit wall light(Chrome and Metal,12W)-DC or equivalent model in other make specified in tender.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed.

All as per Srl. Item No. 151 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Srl. Item No. 151 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed.

Taking down of Old MCB DB any type any size including MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site complete all as specified and directed.

S & F TP&N Vertical Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates 4 way double door DB LL 4W DD VERT W/O MCCB. complete all as specified and directed.

S & F MCCBs 415V, 16KA, 4 Pole 100Amps complete all as specified and directed.

S & F MCB 'C' curve single pole neutral , 32 Amps with breaking capacity 10kA complete all as specified and directed.

S & F Sheet metal enclosure for TPN DB IP 43 Protection double door (Normal range), 415 volts 4way (8+12) with 100 Amps copper bus bar for each chase complete all as specified and directed.

S & F Double door sheet metal enclosure for DBs(Normal range) for mounting of MCB for 240 Volts 8 Way with 100 Amps rated copper bus bar, single pole and Neutral complete all as specified and directed.

S&F GI in repair tubing medium grade of size 15 mm dia incl painting and making hole for extension of fan hook in high roof ceiling complete all as specified.

S & F in repair clamp with buckle for hanging ceiling fan including nut and bolts complete set all as specified and directed.

Supply only MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

S & F in repair AC short circuit protection motor starter 25 Amps capacity AC 230 Volt complete all as specified and directed.

S & F in repair lamp pendant / batten holder, complete all as specified and directed.

Supply & fixing in repair and rewinding included of wall mounted fans 230 volts single phase oscillating 450 mm sweep including all Fixing accessories for fixing at Wall complete all as specified and directed.

Hanging and fixing Ceiling fan of size1200/1400 mm sweep all connecting the electric supply with ceiling rose or connector to fan including of connection flexible wire length complete all as specified and directed.

Supply, Laying and testing for replacement of XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall with saddles/Flat iron clamps as per site requirement /passing through pipe/pole complete of the following sizes and cross sectional area. (a)50 Sqmm, 3.5 Core.

Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.0mm GI wire (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 5 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

PRABIR TRADERS (BID ID -3112663)

DEB AND COMPANY (BID ID -3102096)

JOY RAM ENTERPRISE (BID ID -3110448)

MS HORIZEN (BID ID -3107135)

GHOSH ENTERPRISE (BID ID -3106380)

UNIVERSAL TRADING CENTRE (BID ID -3110279)

MS AP CONSTRUTION AND CO (BID ID -3105724)