Up-gradation of Boosting St...

Amount

Providing and fixing of Ceiling fan 1200mm of approved make including all necessary accessories/ fitting / MS Frame-angles/ framed wire mesh in front of fan etc, complete in all respect as per satisfaction of of Engineer-in-charge.

Providing and fixing of water cooler of 150 L storage Capacity of reputed make complete in all respect i/c all accessories and GI Pipe upto 30 Mtr.

Providing and fixing of suction pipes 400mm i/d MS 15mm thick 13.5 Mtr including cost of 4No MS flanges of 25mm thickness etc as per site requirements complete in all respect as per satisfaction of EIC. (TO BE FIXED DURING CASTING OF WALLS).

Providing of black, transparent road construction water proof polythene sheet 250 micron to 1.5 mm of Make: Mipatex Everest and Shivalik.

Providing and Fixing of D/F 15mm thick MS delivery pipe 400mm i/d of 5 Mtr with 2 Nos Flanges of 25mm thickness, to be fixed during casting of RCC wall of Pump House.

Providing and fixing of 50W LED flood Light on wall/angle stand of upto 1 Mtr of approved make including all necessary accessories / fitting/ MS angles etc complete in all respect as per satisfaction of EIC.

Providing and fixing of 80W LED flood Light on wall/angle stand of upto 1 Mtr of approved make including all necessary accessories / fitting/ MS angles etc complete in all respect as per satisfaction of EIC.

Providing and fixing of 24``/600mm Exhaust Fan of approved make including all necessary accessories / fitting/ MS frame- angles/ framed Wire Mesh in front of fan. etc complete in all respect as per satisfaction of EIC.

Design, supplying, fixing, testing , commissioning of HVAC/Central Air Conditioning System for Panel Room/VFD Area of 150 SQM including cost of all material,labour, TandP as per site complete in all as per satisfaction of Engineer in Charge including OandM of the same for 5 years.

Providing and fixing of gantry of capacity 5 Tonne including rails, cross beam of required size (for 60x10 Mtr Pump-House)I complete in all respect.

Supplying, Installing, testing and Commissioning of Electrically driven horizontal split casing pump and motor sets complete with Impeller made of Stainless Steel 316 grade, Shaft made of Stainless Steel 316 grade, Efficiency- 85% minimum alongwith Base frame, coupling and Coupling Guard of each pump and all civil work related to installation of pump and motor (foundation etc) along with pressure Gauges on suction and discharge as per site requirement integrating with existing structure. complete in all respect to the entire satisfaction of Engineer-in-charge for following Duty points: 1332 m3/Hr @ 64 Mtr Head (Minimum Motor Rating :- 400 KW/500 HP- 415 V.

Supplying, Installing, testing and Commissioning of VFD Pump Control Panel complete with VFD (Variable frequency drive) with PROFINET Communication (along with Pressure Transmitter for all three Zones/lines)of capacity 150%, HMI screen back up protection with semi conductor fuse with Electrcially operated MCCB under voltage and over voltage prtection, input choke IS 8623/ IEC 60439 fabricated on CNC machine, metering and indication to run the pumps, panel be free standing, floor mounting, Cubical type, dust and vermin proof, fabricated out of 16 SWG CRC sheet duly powder coated paint grey shade, compartmentlised and suitable for service voltage of 415V, three phase four wire. etc. complete in all respects, installed in AC cabin with transparent panes. For 1 No. Panel for each pump set of 1332 m3/Hr @ 64m and 500 HP 415 V 3P Induction Motor

Supplying, Laying, Stringing out, Jointing, Cutting, making connection with existing line at both ends and testing of spirally welded M.S. pipe to be made of 15mm thick MS Sheet from SAIL/Jindal/TATA/Welspun only and specials made up of M.S. plate of minimum 12and15mm thickness as per IS:3589 , 25 mm CML inside and PU external coating as per relevant specification and IS code and laying the same including excavation, welding, cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge. Size :- 1000 mm i/d 12mm thick with 25mm thick CML

Supplying, Laying, Stringing out, Jointing, Cutting, making connection with existing line at both ends and testing of spirally welded M.S. pipe to be made of 15mm thick MS Sheet from SAIL/Jindal/TATA/Welspun only and specials made up of M.S. plate of minimum 12and15mm thickness as per IS:3589 , 25 mm CML inside and PU external coating as per relevant specification and IS code and laying the same including excavation, welding, cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge. 900 mm i/d (Header Line) Double Flanged MS Pipe of 15 Mtr Length Each. (Pipe Thickness :- 15mm minimum, Flange Thickness minimum 40mm. CML 25mm thick )

Supplying, Laying, Stringing out, Jointing, Cutting, making connection with existing line at both ends and testing of spirally welded M.S. pipe to be made of 15mm thick MS Sheet from SAIL/Jindal/TATA/Welspun only and specials made up of M.S. plate of minimum 12and15mm thickness as per IS:3589 , 25 mm CML inside and PU external coating as per relevant specification and IS code and laying the same including excavation, welding, cutting of the pipe etc. all material and labour as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge. 400mm i/d MS Pipe of 15mm Thick (Food Grade Epoxy inside)

Providing and fixing of D.I. Sluice valves of PN-1.6 rating with Actuator confirming to IS:14846-DIN- 3352 / BS-5163 bldg-IS-1865 G-400/1500/7 (with latest revision) specifications sluice valves 300mm and above to be provided with back thrust bearing and spur gear arrangment for easy operation, along with contingent material required for their fixing with pipes and specials laid in trenches complete in all respect to the entire satisfaction of the Engineer-in-Charge. 400 mm i/d DI actuator operated sluice valve Resilient Seated

Providing and fixing of D.I. Sluice valves of PN-1.6 rating with Actuator confirming to IS:14846-DIN- 3352 / BS-5163 bldg-IS-1865 G-400/1500/7 (with latest revision) specifications sluice valves 300mm and above to be provided with back thrust bearing and spur gear arrangment for easy operation, along with contingent material required for their fixing with pipes and specials laid in trenches complete in all respect to the entire satisfaction of the Engineer-in-Charge. 900 mm i/d DI actuator operated sluice valve Metal Seated

Providing and fixing of D.I. Sluice valves of PN-1.6 rating with Actuator confirming to IS:14846-DIN- 3352 / BS-5163 bldg-IS-1865 G-400/1500/7 (with latest revision) specifications sluice valves 300mm and above to be provided with back thrust bearing and spur gear arrangment for easy operation, along with contingent material required for their fixing with pipes and specials laid in trenches complete in all respect to the entire satisfaction of the Engineer-in-Charge. 1000 mm i/d DI actuator operated sluice valve Metal Seated

Providing and Fixing of MS and Flanged specials etc. as required as per IS specifications complete in all respects as per directions of Engineer in Charge. All Specials to factory made as per requirement at site.

Supply, installation, testing and commissioning of 400mm NRV PN 1.6 complete in all respects.

Supply, installation, testing and commissioning of Main LT Panel as per IS61439/ IEC61439 consisting of 3Nos incomer ACB 2000Amp, 4 Nos outgoing ACB (1250Amp) , 2 Nos Bus-Coupler 3000 Amp for all lighting, dewatering, vaccum pumps and all other miscellaneous load LT-Motors Bus-Bars of enough capacity to handle above load , with provision for cables from top and bottom , ammeter and voltmeter for each ACB a complete in all respect including connection/integration with existing panel/system with required accessories/bus-bars complete with all material and labour to the entire satisfaction of Engineer in charge.

Supply, installation, testing and commissioning of SET of 11KV-630 Amp VCB Panel complete with protection relays, 1 incomer and 3 outgoing VCB feeders to feed transformers connection/integration with existing panel/system with required accessories/bus-bars complete with all material and labour to the entire satisfaction of Engineer in charge.

Supply, installation, testing and commissioning of APFC Panel 450 KVAr with Heavy Duty Capacitors and detuned reactors, 12 step complete to the satisfaction of Engineer-in-Charge.

Providing, Fixing, Testing, Commissioning of Clamp-on Ultrasonic Flow Meter totaliser with flow transmitter/RTU conforming to IS 2147/ IP 65 with multi stand Copper conductor cable, 1.5 sqmm with PVC screened complete in all respect as per direction and entire satisfaction of Engineer-in-Charge. Tallis, Krohne-Marshall , Adept, Iota-Flow , Omega, Badger Meter. For Pipe size 400mm to 1500mm i/d.

Providing priming arrangement (vacuum pumps of minimum 5HP) conforming to BIS specifications including piping work complete in all respects with satisfaction of Engineer in Charge 2Nos set of Vaccum Pump for a set of 3 Pump-Motor each , interconnected and separated by gate valve in b/w three sets with common GI Pipeline network (Max- 150 Mtr) such that every vaccum pump can also be used for all pumps.

Supplying, Installing, Commissioning and Testing of Dewatering pumps (5 HP) conforming to BIS specifications suitable to Sp. gravity 1.1 with separate 100 mm i/d GI Piping (Heavy C Class) for discharge of andamp: panel board etc complete in all respect.

Supplying, Installing, Commissioning and Testing of Dewatering pumps (10 HP) conforming to BIS specifications suitable to Sp. gravity 1.1 with separate 200 mm i/d GI Pipe (Heavy C Class) for discharge of andamp: panel board etc complete in all respect.

Providing, Fixing, Testing, Commissioning of Gauges, compound and Pressure gauges complete in all respect as per direction and entire satisfaction of Engineer-in-Charge.

Supply, installation, testing and commissioning of MS dismantling joints complete in all respect to the satisfaction of Engineer in Charge. 400mm i/d

Supply, installation, testing and commissioning of copper Earthing as per fault level of all motors, HT and LT panels, wiring and other that can carry charge except Transformers, DG sets complete to the satisfaction of Engineer-in-Charge.

Miscellaneous Sub station items like fire buckets, fire extinguisher, rubber mats for all installations, danger stickers and resusication chart complete to the satisfaction of Engineer-in-Charge

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 35 sqmm, 3.5 core, Al armoured cable

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 50 sqmm, 3.5 core, Al armoured cable

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 70 sqmm, 3.5 core, Al armoured cable

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 95 sqmm, 3.5 core, Al armoured cable

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 120 sqmm, 3.5 core, Al armoured cable

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 150 sqmm, 3.5 core, Al armoured cable

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 185 sqmm, 3.5 core, Al armoured cable

Providing, fixing of cables, cable trays for all interconnection of VCB Panels, Transformer, DGs, VFDs, Motors, Vaccum, dewatering pumos and all other miscellaneous electrical items for operation of Boosting Station complete in all respect to entire satisfaction of Engineer in charge. 300 sqmm, 3.5 core, Al armoured cable

NS/DSR 16.82 :- Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Providing and fixing of fastner (200-300mm) in kerbs .

Providing and fixing of 2 Nos Man-hole/Inspection Chamber with Aluminium ladder, 3 Nos Glass brick panel of (1.5M*1.5M), 6 Nos U-Bend of 200mm i/d complete in all respect as per satisfaction of EIC.

`Providing and fixing PVC Bend ISI mark. 150mm i/d `

Providing and fixing of PVC raw water pipe 6 Kg. pressure of ISI mark in cement mortar during masonry work. plus Stringing out A.C./P.V.C pipes and specials casting along trenches and laying the same in trenches, to correct alignment and gradients including cartage from divisional stores or nearest railway station to site of works and return of pieces of pipes to stores. plus Jointing A.C./P.V.C. pipes and specials with cast iron detachable joints/split coupler P.V.C. joints fitted with bolts and nuts excluding cost of detachable joints/ split coupler P.V.C. joints rubber rings, bolts and nuts but including cost of labour and tools etc. and tested complete.

Bidder Name

Amount

Naveen Dabas (GSTN-06AGIPN0843L1Z8) BID ID -1020559

Chahar Construction Co (GSTN-06AAMFC2979A1ZI) BID ID -1021330

Narender Singh Contractor (GSTN-06AXBPS0272N1Z8) BID ID -1023102

MAHA LAXMI CONSTRUCTION COMPANY(GSTN-NA)--1023026

MAHA LAXMI CONSTRUCTION COMPANY

Chahar Construction Co

Narender Singh Contractor

Naveen Dabas

MAHA LAXMI CONSTRUCTION COMPANY

Chahar Construction Co