8936/GWL/E8 SPECIAL REPAIR WK TO BLDG NO P-81, OR MD ACCN IN MTN BTY LINE AT MORAR CANTT UNDER GE GWALIOR

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) size not exceeding 1.5 Square Meter each, removing from the site, cutting holes of size exc 150 Sqcm but n.exc 400 Sqcm in super facia area into or through brick walls built in any type of mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l (using 20mm graded stone aggregate) as required complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) size exceeding 1.5 sqm and not exc 4.00 sqm each, removing from the site, cutting holes of size exc 150 Sqcm but n.exc 400 Sqcm in super facia area into or through brick walls built in any type of mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l (using 20mm stone aggregate) as required complete all as specified and directed.

S&F for solid PVC door frame of size 50mm×47 mm made out of 5 mm pre laminated colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

S&F for MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc and size of frame 105mmx60mm complete all as specified and directed. Note : Cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame id deemed included in these items.

S&F for MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc and size of frame 125mmx60mm complete all as specified and directed. Note : Cost of filling of PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) in hollow portion of frame id deemed included in these items.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded prelaminated colour PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, panelling of pre lamanited colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

M&L for 35 mm thick factory made 2nd class Hard Wood, plain framed factory made panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face IS 1003 ( Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed.

M&L for 35mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc complete all as specified and directed.

M&L for preperation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc complete all as specified and directed. Note : Panel filling i.e. glass, fibre sheet, board, wire mesh etc shall be measured and paid for separately.

S&F for galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed.

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290, E-165 complete all as specified and directed.

M&L for Preparation of new Steel surface and applying two coats of synthetic enamel paint over a coat of red oxide pink primer over 10 cm width or girth comlete all as specified and directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed.

S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws, solvent cement/adehesive complete all as specified and directed.

S&F for 12 mm thick PVC Celuka ply of both side plain white colour fixed with screws, solvent cement /adehesive complete all as specified and directed.

S&F for Aluminium anodised barrel tower bolt of size 200mm of extruded section complete all as specified and directed.

S&F for Aluminium anodised barrel tower bolt of size 150mm of extruded section complete all as specified and directed.

S&F for Hasp and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified and directed.

S&F for Magnate catcher of metal body and striking plate heavy duty includind fixed with screw complete all as specified and directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electrogalvenised of not exc 25 mm flaps complete all as specified and directed.

S&F for Aluminium alloy anodised sliding door bolt of size 250mm with hasp, staple (bolt type) & fixing clips of sheet etc complete all as specified and directed.

S&F for 250mm size MS Sliding door bolts Rod pattern stove enamelled black with bolts not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate complete all as specified and directed.

S&F for Aluminum butt hinges of 100mm size of type C-22 complete all as specified and directed.

S&F for MS 150 mm size ordinary rat tail springs plate type incl rollar plate etc complete all as specified and directed.

S&F for Extruded aluminium alloy handle of 125mm size fabricated type, anodised complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item

Excavation over area as in soft / loose soil nexc 1.5 m deep and getting out complete all as specified and directed.

Taking down existing tarfelt from roof and removing from site complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) over roof, surface finished even and rough mixed with water proofing compond complete all as speceified and directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for PCC (1:2:4) Type B-0 (using 12.5 mm graded stone aggregate) as levelling course/mass concrete complete all as specified and directed.

M&L for precast cement concrete tiles of size 250mm x 250mm x 20 mm as in floor top, confirming to IS-1237-1980 laid over 15 mm thick screed bed in CM 1:4 and set, jointed and pointed in neat cement slurry in floors, and cut & plished between tiles 2 to 3 mm will be filled with cement mortar (1:2) by mixing of chemical or equilant approved by the GE complete all as specified and directed.

Dismantiling of any type of stone slabs and tiles of any discription or any thickness in floors, aprons, skirting, dado, PCC tiles at roof etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for moorum/ red bajri filling in floors or pavings laid in layers n.exc 15 cm thick each layer, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in plinth protection/Path etc surface even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in floors, finish rough to receive the floor finishes etc complete all as specified and directed.

M&L for Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms including rounding off the exposed edges and polishing complete all as specified and directed.

M&L for machine cut Kota stone slab 20mm to 25 mm thick, as in flooring, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of 20 mm thick CM (1:3 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20mm-25mm thick as in riser/steps, skirting, dado, cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for digital glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical faces i.e. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles of size 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick as in skirting fixed over and including 10 mm thick cement screed in CM (1:3) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles with the colour of tiles complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick/concrete/stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coats of cement base paint complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling surfaces & applying 3 coats of white wash complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of wall care putty on plastered surfaces on wall incl preparation of surfaces etc complete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment complete all as specified and directed.

M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls surface complete all as specified and directed.

M&L for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots complete all as specified and directed.

M&L for applying Two coats of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots complete all as specified and directed.

M&L for applying Two coats of white wash on wall surface complete all as specified and directed.

Demolition of brickwork or stone/boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth as in foundation etc as in soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5Km above the starting point complete all as specified and directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (nominal mix) (using 20mm graded stone aggregate) as in shelves, etc complete all as specified and directed.

S&F for TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.

Providing precast RCC as in cover slab, lintel etc using RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including all form mould etc complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe complete all as specified and directed.

Supply and laying 20 mm dia of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked, concealed or fixed to wall, ceiling or laid in floors complete all as specified and directed.

Supply and laying 25 mm dia of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked, concealed or fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F for 20 mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and directed.

S&F for 25mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and directed.

S&F in renewal 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F for renewal in 75 mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints, fixed in Wall/laid in floor complete all as specified and directed.

S&F for 110mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F for 75 mm dia PVC(SWR) bends any radius with access door complete all as specified and directed.

S&F for 110mm dia PVC(SWR) pipes junction, (T/Y ) equal or unequal any radious with access door complete all as specified and directed.

S&F for 110mm dia PVC(SWR) vent cowl complete all as specified and directed.

M&L in renewal for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement complete all as specified and directed.

M&L in renewal for PVC (SWR) gully trap 125/100 plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in renewal 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete all as specified and directed.

S&F in renewal 15mm angle cock chromium plated, cast copper alloy, with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in renewal Stop valve screwed down high pressure with capston heads handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.

S&F in renewal 15mm, bib tap Fancy type long body chromium plated, cast copper alloy, with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

Supply only 15mm, pillar taps fancy type long body chromium plated, cast copper alloy, with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.

M&L for vitreous china squatting pan, orissa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete all as specified and directed.

S&F of vitreous china wash basin, white, flat back of size 550mm x 400mm Including waste coupling, waste pipe and labour for fixing pillar tap, pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid as supply only.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F for corner glass shelf 300mm (with ABS Bracket) complete all as specified and directed.

S&F for Soap dish of CP fixed with PVC rawal plugs and screw complete all as specified and directed.

S&F for in renewal CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F for Peg set of six S.S. hooks fixed to wall with PVC plugs and screw complete all as specified and directed.

S&F in renewal curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all specified and directed.

Dismantling water tanks of any description and in any position, of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F for Rotational moulded poly-ethylene Three layered antibactrial film tanks (cylinderical vertical ) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in renewal gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S&F in renewal for plate rack made out of stainless steel of wire type/sheet pattern size and type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.

S&F in renewal sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling, waste pipe including bedding in CM to dwarf wall or including fixing cantilever brackets and connections to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and avg 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.

M&L for machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks/tiles, 60mm thick of grade M-35, of any shape or shap and designe as approved, with colour pigment, laid over sand cusion fixed as in floors/paths/pavings etc, complete all as specified and directed. Note : Sand Cusion shall be measured and paid in separate item

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed .

M&L for cement concrete ( 1:2:4) type B-1 (using 20mm graded stone agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.

M&L for 15 mm thick dubbing coat in Cement Mortar (1:4) on ceiling surface complete all as specified and directed.

M&L for Prepartion of New/Old plastered surfaces of walls, chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade) complete all as specified and directed.

S&F for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, 150mm long, fixed in floor complete all as specified and directed.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and directed.

Taking down carefully existing aluminum/copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity complete all as specified and directed.

Taking down unserviceable TPN DB with MCB's of any make/capacity complete all as specified and directed.

Taking down existing energymeter and refixing the same back to its original positions including connecting with requirement connection etc, complete all as specified and directed.

M&L for concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade(ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified and directed for the following :-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

For one light point controlled by 2- two way switch

Description all as per item No 125 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. Note :- 16 Nos Points for inverter connection.

S&F for Modular switch 1 way 6A,1 module complete all as specified and directed.

S&F for Socket 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F for Modular switch 1 way 16A,1 module 15 Amp complete all as specified and directed.

S&F for Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F for Socket 15/25A - 2/3 pin combined 2 module complete all as specified and directed.

S&F for Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F for modular bell push flush type, 5 Amps complete all as specified and directed.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F for ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F for Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed.

S&F for Lamp holder with metal ring, PVC/ Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed.

S&F for LED Lamp 09/10, efficiency > 130 lumen/watt complete with 5 star rating complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 1.5 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 25 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F for Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting ,Efficiency >130 lumen /watt including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F for security light fittings better optics for uniform distribution, IP 65 protection LED of 30 watt with photometric sensor, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of size 40 mm x 5 mm of FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

S&F for Photometric sensor outdoor type 220-240 volt ambient light <5-15 lux working temparature -20~+40C working humidity <93% RH along with pvc connection of 6 to 10 amp capacity complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers complete all as specified and directed.

S&F in renewal or sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S&F for MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F for MCB SPN 63 Amps, 240 volts 'C' series 16 KA, including connection with suitable size copper lugs complete all as specified and directed.

S&F for MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S&F for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 3.5 Core complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed.

Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminum conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed.

S&F for tube 'Light' grade galvanised with all fitting, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

M&L for GI pipe medium grade of 25mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed.

S&F for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed at any location of size 25 mmm dia complete all as specified and directed.

Supply and installation of Chemical earthing electrode 3.0 mtr length, galvanised outer dia 88mm and inner dia 48mm and the cavity between the rod pipes filled with ground resistance improment powder, sealed with both end the outer pipe of electrode should be Zinc coated, the electrode should buried directly in groundby making boring of diameter 10" with boaring machine highly connected with GI strip of size 25x3mm of 2 to 3 mtr length to facilitet further connection to earth dolly and provision of earthing chamber in bricks wall size 45x45x15 cm and having PCC cover made out of PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) of required size complete all as specified and directed and all as per IS 3034(1981).

S&F for modular plate and provising of new modular plate of different size including fixing, the existing modular switchs, modular socket, modulare regulator and refixing them in new board complete all as specified and directed. Note : Renewal of any switches, sockets, fan regulator will be measured under separated items.

White cover plate with frame but 2/3/4 module

White cover plate with frame but 6/8/12 module

Supply and installation of Polycarbonate cubical box (minimum capacity of 04 Nos meter) Three phase & single phase smart meter including 100 amps 415 volts 4 way copper bus bar (MS)/inbuilt busbar within the meter cubicles complete all as specified and directed.

M.S. ENGINEERS

M/s KGN Builders

mahamaya constructions

BHAGIRATH CONSTRUCTION COMPANY

M/s Subhash Construction Co.

lodhi builders