Dharapuram Municipality Repair and Maintenance of Valayalkara street Anganwadi center at Dharapuram Municipality

Dismantling for existing damaged vertified marbonite tiles and removed of dismantled deprise from work site and all labour charges for clear the surface etc., complete

Dismantling for existing damaged plain cement conrete including cost of removal of dismantled deprise from work site for and clear surface work etc., complete

Removal of damaged AC sheet roof without timber or steel and clear the dismantiled debrise from work site for surface work etc., complete

Removal of existing reusable truss and purline made up MS 'L' angles and sections and stocking for truss etc., complete

Repair and refixing of country wooden window for repair and providing proper hinges, tower bolt and locking arrangement for refixing at same place including cost of all materials labour charges etc complete.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Refixing of removed tress to raised roof wall with proper level, direction and plump with proper concreting at supper joint with necessary bed bolt and plate which is suitable for site condition including cost of all materials labour charges etc., complete

Repair and refixing of existing MS steel door and windows with proper hinges, tower bolt, locker arrangements and providing one coat of priming coat by with red oxide and fixing propering wall surface etc., complete

R.C.C.Jolly by a new of following size in M20 Concrete using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication

Supplying and fixing Countrywood fully panelled (Single Leaf) shutters using ountrywood scantlings of size 100x40mm for styles & rails, 22mm thick planks for panels(5 Nos) and Brass / SS Furniture fittings(3 Nos - Brass / SS Hinges 125x30mm, 2 Nos - Brass / SS Tower bolt 300x12mm, 1 Nos - Brass/ SS Tower bolt 200x12mm, 1 Nos - Brass / SS Aldrop 250x16mm, 2 Nos - Brass / SS Handle 200mm) including cost of wind appliances and labour charges for fixing the furniture fittings in position etc., complete complying with standard specification and as directed by the departmental officers

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Reinforced Cement concrete 1:1.5:3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of „D‟ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm as instructed by the departmental officers

Supply delivery of following PVC pipes and specials etc., complete

a) 2" PVC 10Ksc Pipe

b) 2" PVC Elbow

c) 110mm PVC Cowl

d) 110mm PVC 4Ksc pipe

e) 110mm PVC Elbow

d) 20mm GI Elbow

e) 20mm x 2" GI Nipple

f) 3/4" x 3" GI Nipple

g) 3/4" x 1" GI Nipple

h) 3/4" GI Coupling

i) 3/4" GI Hex Nipple

j) 3/4" PVC Tap

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting with Ready Mixed Enamel Paint over the old wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete

Paiting two coats with block board paint approved quality and color including through scrapping clean removal of virt etc., complete and including necessary plaster of paries putty where ever required etc., complete as per specification