GE U(N) 75 2022 23 PROVISION OF CHAIN LINK FENCING AND ADDTIONAL ALTERATION TO TRG LAB B NO 08 INCLUDING PROVISION OF CHEQUERED TILES UNDER AGE BR II OF GE (NORTH) UDHAMPUR

Amount

M&L for taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed by Engineer in charge.

M&L for 10mm thick rendering on surfaces other than fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar 1:6 complete all as specified and directed by Engineer in charge.

M&L for 5mm thick rendering on fair faces of concrete surfaces, finished even and smooth, as in ceiling in cement mortar 1:4 complete all as specified and directed by Engineer in charge.

M&L for 15mm rendering on fair faces of brick work or concrete surfaces, finished even and fair walls in cement mortar 1:4 complete all as specified and directed by Engineer in charge.

M&L for demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground) complete all as specified and directed by Engineer in charge.

M&L for hardcore of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer in charge.

M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified and directed by Engineer in charge.

M&L for dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer in charge.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and rough to receive tiles as in flors complete all as specified and directed by Engineer in charge.

M&L for light grade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sqm , in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, complete all as specified and as directed .

Ditto all as per item no 10 above but as in skirting over vertical surfaces & including 10mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engineer in charge.

M&L for first quality, glazed ceramic, straight cut/ edge/ joint free, colored 7-9mm thick tiles of size 300X450mm on vertical surfaces such as dados etc over & including 10mm thick, cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles including taking down existing treatment complete all as specified and directed by Engineer in charge. Note : Tiles to be fixed in concept matching concept colour and shade will be approved by Engineer-in Charge.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11Sqm but n.exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface laid over & incl 10mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer in charge.

M&L for dismantling asbestos cemet (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed by Engineer in charge.

S&F Pre-painted galvalume aluminium zinc coating corrugated GI based steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation, boards/ slabs/ blankets, any thickness, including cover fillets, all as specified

M&L for 4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel confirming to IS 14862 type B category three including GI frame work with size of grid 605mm 605mm including all accessories, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, complete all as specified and directed by Engineer in charge and as directed by Engr-in-Charge.

S&F powder coated aluminium door/ windows air tight anodized frame made of size 100x45mm of sheet thickness 1.5mm with one or more rebate incluing jointed cleats hinges etc for fixing anodized aluminium door shutter fully paneled) two Nos of panel on each shutter) with 5.5mm thick tinted plain glass shutter rail made of 80x45mm of sheet thickness 1.5mm (top, bottom, middle and side rail). Single/ double leaf side hung type including necessary joint class, anodized aluminium fitting/ aluminium fitting such as aluminium butt hinges 100mm long 4 NOs on each shutter, aluminium anodized tower bolt200mm long 3 NOs for each door, aluminium anodized handle150mm 2 NOs 'D' type for each. Shutter & looking 6lever of make Harrison one on each door, bottom door spring one on each shutter including hydrullic door closer. All door fitting except cleat shall be 1st marked (size of each door shall be as per site reqirement) complete all as specified and directed by Engineer in charge..

M&L for taking down shutter without taking out chowkhats exceeding 1.5sqm but not exceeding 4sqm complete all as specified and directed by Engineer in charge.

M&L for taking down chowkhats without taking off shutters from the frames (with shutters) area n.exc. 1.5sqm each complete all as specified and directed by Engineer in charge.

S&F roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) incl distant pieces, cleats (Fe 410-W (Gde E-250) quality B complete all as specified and directed by Engineer in charge.

M&L for preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Altek/ Birla white putty to obtain smooth/ even finishusing sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming complete all as specified and directed by Engineer in charge.

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered surfaces of wall upto 12-15m height from ground level and at all locations as directed including scaffolding, cleaing and curing etc complete as directed by Engineer-in Charge.

S&F PVC valveless symphonic action type flushing cistern low leel white inlet, ball valve, float and hande including brackets, flush pipe and PVC connection, capacity of tak 10Ltr complete all as in repairs complete all as specified and directed by Engineer in charge.

S&F vitreous china wash down water closet pan (pedestral pattern), white (excluding flushing cistern and flush pipt) including connection to drain and flush pipe, fixed in repair complete all as specified and directed by Engineer in charge.

S&F plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as specified and directed by Engineer in charge.

S&F cast copper alloy, chromium plated hand shower (health faucet) with 8mm dia, 1.00 metre long flexible tube and wall hook, IN REPAIR,complete all as specified and directed by Engineer in charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, fixed in repair complete all as specified and directed by Engineer in charge.

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long with aluminium alloy brackets and guard rail complete as approved by Engr-in Chrage.

S&F in repairs vitreous china wash hand basin white flat back size 580x450mm including waste chain and plug and procelain complete all as specified and directed by Engineer in charge.

S&F in repairs bib taps fancy type, cast copper alloy, long body chromium plated with crutch or butterfly handle screwed down for iron pipe for brass ferrule and fixed for bore of pipe 15mm complete all as specified and directed by Engineer in charge.

S&F in repairs stop valve, fancy type, chromium plated, (concealed with adjustable wall flange), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, all as specified.

S&F in repairs angle valve fancy type, chromium plate for 15mm bore complete all as specified and directed by Engineer in charge.

S&F in repairs pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed by Engineer in charge.

S&F in repair C.P. grating 100mm square/ round with or without hole complete all as specified and directed by Engineer in charge.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheeet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing on Page No. 160 MES SSR-2010 Part-II and as directed by Engr-in Charge

S&F factory made pnnel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either ide and as gap insert for top rail and bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed by Engineer in charge in SSR and as directed.

S&F mild steel cold roled butt hinges medium weight 75mm long complete all as specified and directed by Engineer in charge

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer in charge.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer in charge.

S&F rotational moulded PVC water tanks of cap 1000ltrs cylindrical vertical three layered white in colour with closed top hoisted and fixed in position all as specified in SSR Part incl dismantling of existing unserviceable water tanks and removal from site complete all as specified and directed by Engineer in charge.

Taking up or down steel tubing and connections, including cleaining for refixing or removal to store 15mm dia complete all as specified and directed by Engineer in charge.

S&F steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors in 15mm bore complete all as specified and directed by Engineer in charge

M&L for providing chequered cement concrete tiles 25cm x 25cm x 22mm thick tiles set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over & incl 20mm thick screed bed in CM 1:4 all as specified & directed.

M&L PCC 75mm thick 1:4:8 type D2 using 40mm graded stone aggregates as in sub base flooring complete all as specified and directed by Engineer in charge.

M&L for excavating in post holes (or similar holes) each n.exc 0.5cum, getting out, returing, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in any type of soil all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundations, fillings and mass concrete thick all as specified

S&F steel sections as in posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc including all necessary drilling, bolting or riveting similar works confirming to (Fe-290 (Gde E-165) all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provission of binding wire only all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer in charge.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing and straining and fixing to any type of standard bolts, including securing or typing at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed. (Each line wire to be measured)

M&L for brickwork with sub class 'B' bricks, straight or curved on plain exc 6m man radius, built in CM (1:4) complete all as specified and directed by Engineer in charge.

M&L for surface excavation not exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed by Engineer in charge.

M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep in any type of soil all as specified and directed.

M&L for returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil complete all as specified and directed by Engineer in charge.

M&L for removing excavated surplus material (soil) to a distance not exc. 50cm and depositing where directed at level not exc. 1.5m above the starting point complete all as specified and directed by Engineer in charge.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other coverings. Doors etc to be prepared for hnging or sliding with and including either hooks or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fasterning and fixing all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded crushed stone aggregates as in seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height , coppings, the like including weathering, slightly rounded or chamfered angles and throating as directed all as specified.

M&L for painting new or previously untreated steel or iron surfaces incl preparation of surfaces and applying two coats of synthetic enamel paint over a coat of rd oxide or zinc chrome primer all as specified and directed.

M&L for machine pressed precast interlocking paver blocks any shape and size with grey cement and pigment confirming to IS-15658-2006 of 80mm thickness (M-35 Grade) complete all as specified and directed by Engineer in charge.

M & L for sand cushning bed (filling under floor) incl spreading levelling watering if required complete all as specified and directed by Engineer in charge.

M&L for joist, channel, angle or tee sections, fixed independently without connection plate, etc. (cut to oridinary lengths i.e within 20mm of the length indicated complete all as specified and directed by Engineer in charge.

M&L for fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type cranked hook bolts all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb stones and in similar works bedded and jointed in CM 1:6 incl necessary exc if necessary complete all as specified and directed by Engineer in charge.

M&L for taking down carefully point wiring copper/ aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regtulators sockets etc tobe measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and directed by Engineer in charge and as directed.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engineer in charge. Make of cable :- Anchor/Havells/ fiinolex and Make of pipe :- Kalinga/Polycab/Havells (Note : Switches, Sockets etc shall be measured and paid for separately under appropriate items (a) One light point /bell point controlled by one switch

(b) All as per item No 69 above but for one 3/5 pin socket outlet, 5 Amp independent

(c)All as per item No 69 above but for one socket outlet 3 Pin, 5 Amps, SP on same board.

M&L for point wring for power point controlled by one switch with 2.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 sqmm copper conductor cable FRLSH connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engineer in charge. Make of cable :- Anchor/Havells/ fiinolex and Make of pipe :- Kalinga/Polycab/Havells (Note : Switches, Sockets etc shall be measured and paid for separately under appropriate items

All as per item No 72 above but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and directed by Engineer in charge

Supply and fixing in replacement modular switch single pole one way 10Amps 1 module complete all as specified and directed by Engineer in charge

Supply and fixing inreplacement modular switch single pole one way 16 Amps 1 module complete all as specified and directed by Engineer in charge

S&F Moduler switch Piano flush type single pole 5 Amps two way, all as specified and directed .

Supply and fixing in replacement modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement modular Bell push 6 amp 01 module complete all as specified and directed by Engineer in charge.

Supply and fixing in replacement modular socket 6 /16 Amps 2/3 pin flush type complete.

Supply and fixing in replacement of ceiling rose.3 face/PVC/polycarbonate,isolated body all as specified and directed.

Supply and fixing in replacement modular electronic fan regulator, step type, two module 60 watt 230 volt and making all necessary connections complete all as specified and directed by Engineer in charge.

S&F Bell ding dong AC 23Volts single pole all as specified and as directed by Engineer in charge

S&F LED light fitting PLUTO NEO PANEL 2'x2' PLR 36 watt LED 857S environmental friendly , new generation , aesthetically designed ,ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong /grid /ceiling all as spesified and directed.

S&F in replacement Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge. Make -Make model of Havells cat No LHEXBYPNIN1W020 or equilent to CG/ syska CAT NO : SSK-SQ2001 RA 1801

S&F in replacement E-Lite LED Curve lighting fixture 10/12 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge. Make -Havells as per ordering code LHEXBYPNIN1W010, Syska cat No SSK-SQ1201or equivalent model of Bajaj/Philips/Surya/CG.

S&F in replacement E-Lite LED Curve lighting fixture 05 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge. Make -Havells as per ordering code LHEXBYPNIN1W005, Syska cat No SSK-SQ0401 or equivalent model of Bajaj/Philips/Surya/CG.

S&F in replacement security (street) light fitting 35 watt, new generation energy saving & environmental friendly long life versatile pressure die cost aluminium IP 66 with acylic, powder coated, pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver, including provision of GI tubing bracket of suitable size and fixed on wall including clamps, nut, bolts and washer for fixing of security (street) light complete all as per direction of Engr-in-Charge. Make:SYSKA Cat no SSK-ST-25W(SN) or equivalent in CG cat No : LSTS-25-CDL

M&L for replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6 Sqmm PVC FRLS ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 4.00 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete.

M&L for sub main wiring with 2 single core PVC insulated FRLS unsheathed stranded copper conductor cable of Size 4 Sqmm with and including PVC concealed conduit "ISI" marked with all fittings and accessories and one single core PVC insulated FRLS single core stranded copper conductor cable 4.0 sqmm as contineous earth wire and connected to earth dolly all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following:- (a) Test point GI wire 4mm dia . (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

M & L for replacement of DB0Xx MCB protected socket with sheet steel enclosure complete WITH MCB SP 25Amp of Make Havells Cat No DHDMCSN0251025 equivalent to Havells/ Schnieder all as specified and as directed by Engineer in charge.

Supply and fixing 4mm dia GI wire as earth continuty conductor or main earth strip fix to wall on batten or recess or chess or burrid in ground or any other indicated situation for loop earthing etc all as specified and as directed by Engineer in charge..

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways.Make:- . Make: Legrand (Ekinox3) cat no- 507612 Ekinoxe/ schneider(Acti-9)/ Siemens(Betagard-8GB 32).

S&F 'C' series SPN MCB 40 to 63Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408637, 408639/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).

S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc. Make: Legrand (DX-3) cat no- 408587,90,92,93,94,95/ schneider(Acti-9)/ Siemens(Betagard- 5SL4).

S & F sheet metal TPN DBs - DPX3 160 MCCB DBs 04 way (DPX3 160+ 12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge.Make Legrand Cat part No : 5077 50 or equivalent to Shnieder

S & F DPX3 thermal magnetic MCCB 3 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by Engineer in charge for MCCB DB.Make Legrand, Cat part No : 4200 05 or equivalent to Shnieder

M&L for taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and painting with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm complete all as directed by Engr-in-Charge.

M&L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as directed.

Supply and fixing Exhaust fans steel body,AC ingle phasee 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and directed by Engineer in charge

Supply and lay in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and directed by Engineer in charge

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt complete all as specified and directed by Engineer in charge

M&L for GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia.complete all as specified and directed by Engineer in charge

Supply and fix on load change over switch 4 pole 415 V in sheet metal enclosure 4 pole of capacity 100 Amp all as specified and directed by Engineer in charge.Make : Havells Cat No: IHBFFE0100 OR Equivallent to other makes of L&T/C&S

KUMAR CONSTRUCTION CO

M/S SATINDER PAL & CO.

joginder singh and sons

TULSI RAINA AND SONS

anil construction co.

paras ram pachiala

takashdeep traders

pargal builders

SATYA SALES AND BUILDERS