Carrying out different electric line work under full deposit scheme in the area of EE, EUDD, Krishna Nagar, Mathura under the jurisdiction of the Superintending Engineer, Electricity Urban Distribution Circle, Mathura

Cartage of following material from Store centre, Mathura to work site.

ST Pole/PCC Pole (11/9/8.5 mtr. Long)

LT XLPE cable of size 3.5x240/150/95/70 sq.mm. 4x50 sq.mm.

LT PVC cable of size 1x630 sq.mm.

11KV XLPE cable of size 3x300/240/185/120/70 Sq.mm.

33KV XLPE cable of size 3x185/120/50 Sq.mm.

Dog/Weasel Conductor

LT Aerial Bunch conductor.

Other line material such as cross arm, MS channel, Angle, Fuse Set, TPMO, insulator, Line Isolator etc.

Digging of pit & erection of new single support ST Pole (11/9mtr. long) for 33KV line.

Digging of pit & erection of new 11/9 mtr. Double ST Pole structure for 33KV line.

Digging of pit & erection of new 11/9 mtr. triple ST Pole structure for 33KV line.

Digging of pit & erection of new single support ST Pole (11/9 mtr. long) for 11KV line.

Digging of pit & erection of new single support PCC pole (8.5mtr. long) for 11KV line.

Digging of pit & erection of new Double ST Pole structure(11/9 mtr. long)/PCC pole (8.5mtr. long) for 11KV line.

Digging of pit & erection of new Triple ST Pole structure(11/9 mtr. long) for 11KV line.

Digging of pit & erection of new four ST Pole structure(11/9 mtr. long) for 11KV line.

Digging of pit & erection of new single support ST Pole (11/9 mtr.) for LT line on ABC.

Digging of pit & erection of new single support PCC Pole (8.5 mtr.) for LT line on ABC.

Earthing of ST pole by M.S earth rod.

Painting of ST pole.

Grouting of STP/PCC Pole

Digging of pit & erection of Stay rod with grouting cement sand and brick ballast including Nuzzling, binding Complete.

Laying of 33/11KV line on Dog/weasel conductor on erected poles.

Guarding of 33/11KV line.

Fixing of 33 KV Fuse set.

Providing 33 KV fuse set structure.

Providing and fixing of 33 KV Cable jointing kit O/D & I/D 3x120/185 sq.mm.

Provding and fixing of 33 KV Cable Straight Through 3x120/185 sq.mm.

Providing and fixing of 11 KV Cable jointing kit O/D & I/D 3x70/120/185 sq.mm.

Provding and fixing of 11 KV Cable Straight Through 3x70/120/185 sq.mm.

Providng and fixing of LT XLPE Cable 3.5x240/150/50 sq.mm. Straight through.

Fixing of Line Isolator 800 Amp.

Providing Structre for line Isolator 800 Amp

Fixing of 33 KV Post Isolator.

Fixing of 11 KV D.O. Fuse set.

Fixing of 11 KV TPMO Set

Providing and fixing of Aluminium Lug 240/150/50/630 sq.mm.

Laying of AB conductor for LT line on erected poles.

Layng of LT XLPE cable of size 3.5x240/150/95/70 sq.mm. 4x50 sq.mm.

Layng & Connecting of LT PVC Cable of size 1x630 sq.mm.

Providing & laying of HDPE pipe of dia 160 mm through trenchless method for laying of double ckt. 33/11 KV XLPE cable by horizontal boring machine below the ground level of 1.0 to 1.5 mtr.

Laying of Underground double ckt. 33/11KV XLPE cable of size (3x300/240/185/120/70 Sq.mm) inside HDPE pipe.

Digging of trench by excavation of earth 0.90/1.5 Mtr. deep put brick on both side, filling of sand & brick on cable & earth ramming and dressing properly with complete job for laying double ckt. 11 KV/33 KV XLPE cable in trench.

Laying of 33 KV/11 KV, XLPE Cable in Air on Pole & making loop on Double Pole Structure.

Installation of Distribution Box on ST pole/PCC pole for AB conductor.

Providing & fixing of G.I Pipe of diameter 6 inch for riser.

Jointing of cable with another cable/overhead line at the D/P structure through 33/11 KV outdoor cable jointing kit

Stringing of LT/HT XLPE Cable.

The Construction of new Plinth of Size 5’X5’X4’ above ground level and one ft. below the ground level for 400/250 KVA transformer

Removal of old transformer (400/250KVA) with all connecting accessories from existing plinth and shifting & installation of transformer with all connecting accessories to the newly constructed plinth including jumpering etc.

Removal of old transformer(100/63/25/16 KVA) with all accessories from existing double pole and shifting & installation of transformer with all connecting accessories to the newly constructed Double pole including jumpering etc.

Installation of following transformer on Plinth/Double pole with all connecting accessories jumering etc. including carriage of transformers from store centre, Mathura to work site.

250/400 KVA Transformer on Plinth.

100 KVA Transformer on Double Pole structure.

63 KVA Transformer on Double Pole structure.

25 KVA Transformer on Double Pole structure.

11/0.4 KV, Single Phase 16/10 KVA Transformer on singh pole structure.

Installation of 11 KV CT/PT combined unit on erected double pole structure.

Installation of pilfer proof metering cubicle.

Construction of M.S angle fencing of size (3M x3M x2M) around the plinth of 400/250KVA transformer and gap between the M.S angle should not be more than 65mm.

Complete chemical earthingof 11/0.4 KV, 250/400 KVA Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1. Earth pipe material – mild steel, Galvanized. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode: - 2.6mm. 5-Wall thickness of auxiliary hole: - 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.

Dismantling of single support ST Pole/ PCC (11/9/8.5mtr.) pole with complete accessories and cartage of material from work site to Store Center, Mathura.

Dismantling of 33/11KV line and cartage of material from work site to Store Center, Mathura.

Dismantling of LT line and cartage of material from work site to Store Center, Mathura.