Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC | L1 | Accepted-AOC Being overall rate reasonable | |
| 2 | L2₹54.7 L+₹17.7 L (48.0%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
30 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
REPAIRS AND MAINTENANCE OF STREET LIGHTS / SECURITY LIGHTS WITH CONNECTED WORKS AT 512 ABW UNDER AGE E/M-II IN GE CENTRAL KHADKI.
2023_MES_621590_1
8862/E8 OF 2023-2024
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
512 ABW area
Class D category b(i)
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹99,000
Yes
28 Dec 2023
4 Oct 2023
1 Nov 2023
4 Oct 2023
30 Oct 2023
17 Oct 2023
4 Oct 2023 - 11 Oct 2023
Amount
NOTE :- a) Contractor has to arrange his own vehicles along with mounted hydraulic ladder/articulated & telescopic boom lift arrangement for attending the complaint of Street light throughout entire area of 512 ABWS (b) Contractor shall depute minimum 2 staff daily to attend and rectify the complaint of street light, if not, Contractor shall have to bear a penalty of Rs 50.00 per complaint or maximum of Rs 500 per day on this account (c) Complaints be attended till completion / rectification of complaint / defect in all respect irrespective of no of trips/Complaints as alloted by Eng-in-Charge
Excavation in trenches in any type of soil not exceeding 1.5 M deep and not exceeding 1.5 M width and getting out including forming bottom surface & sides to required slope/size as directed by the Engineer-in-Charge
Material and labour for sand / fine dust cushioning to under ground cable providing with a layer of and 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and directed by Engr-in-charge NOTE :- punning thickness of 18 cm will be measured for payment
Supply & laying un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified and as directed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil.
Removal of surplus soil to a distance not exceeding 50 m and depositing where complete all as specified and as directed by Engr-in-charge.
Supply and Lay, LT underground 10 Sqmm 2 core cable XLPE insulated armoured heavy duty 1100 Volts grade with aluminium conductor multistranded including centre glands/lugs/jointing materials etc..laid in trench or fixed to wall including dismantling of old one, connecting testing and commissioning complete all as specified and as directed.
Description all as per item No 07 here in above but 16 Sqmm 4 core
Description all as per item No 07 here in above but 25 Sqmm 3.5 core
Description all as per item No 07 here in above but 35 Sqmm 3.5 core
Description all as per item No 07 here in above but 50 Sqmm 3.5 core
Supply and fixing in replacement, PVC insulated and sheathed unarmoured two core aluminium conductor service cable , 2 core 2.5 sqmm, 220 volt to be replaced in existing fittings including dismantling and taking out old burnt electric cable complete all as specified and as directed
Supply and fix in replacement, PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 4 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable complete all as specified and as directed.
Supply and fix in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 6 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable complete all as specified and as directed.
Supply and fix in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 10 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable complete all as specified and as directed.
Supply and fix PVC sheathed 1100V grade flat three core stranded aluminium conductor of size 2.5 sqmm including conduit pipe connecting from SMC box to street light fitting Complete all as specified and directed by Eng-in-Charge
Taking down old unserviceable street light / flood light / post top / bollard light of any description and capacity
Taking down old unserviceable MCB/MCCB of any capacity.
Taking down old unserviceable driver of any capacity.
Taking down old unserviceable service wire of any size.
Supply and fix LED street light 45W including making electrical connection to the fitting with Suitable size of service wire . MAKE :- Cat Part No. LSTS-45-CDL-M of Crompton Freedom Neo. or equivalent.
Supply and fix LED street light 60W including making electrical connection to the fitting with Suitable size of service wire . MAKE :- Cat Part No.TRP-409-60-57-SL-GL-NSG.. Crompton Raptor Neo or equivalent.
Supply and fix LED street light 90W including making electrical connection to the fitting with Suitable size of service wire . MAKE :- Cat Part No. TRP-411-90-57-SL-GL-NSG of Crompton Raptor Neo or equivalent
Supply and fix LED street light 120W including making electrical connection to the fitting with Suitable size of service wire . MAKE :- Cat Part No. TRP-411-120-57-SL-GL-NSG of Crompton Raptor Neo or equivalent
Supply and fix LED flood light 70W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified and as directed by Eng-in-Charge. MAKE :- Cat part No.Rover pro LFL-80-CDL/60-M of Crompton or equivalent
Supply and fix LED flood light 100W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified and directed by Eng-in-Charge. MAKE :- Cat part No.Rover pro CFS-504-100-57-60D-SL-GL-NSG of Crompton or equivalent
Supply and fix LED flood light 120W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge. MAKE :- Cat part No.Rover pro TFS-504-120-57-60D-SL-GL-NSG of Crompton or equivalent
Supply and fix LED post top luminaries 40w decorative post top for 360 degree indirect light fixing on existing pole with all necessary fixing arrangement and all accessories prewired including connecting up with twin core copper conductor cable with suitable size. MAKE :- Cat Part No LPTO-40/ CDL of Crompton or equivalent
Supply and fix LED bollard light fittings, LED 10Watt, all including fixing material and earth work complete and connected to neares electric pole all as specified and as directed. MAKE :- Crompton (Cat No: LBLSN-10-CDL ) or equivalent
Supply and fix at 5 to 9 mtr height-150W Industrial LED Highbay luminaire with > 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge. make : Cat Part No SLE HB 150W COMET NEO-N of Surya or equivalent NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.
Supply and fix street light mounting bracket, made out of Light grade GI Tubing 32 mm bore , bend to shape inner angle not less than 120° and over all length not less than 1.0 Mtr including suitable size clamps made from not less than 25x3 mm ms streep , Nut, bolts 12 mm dia with washers complete fixing arrangement.
Material and labour for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 5 Oms including testing complete all as specified Make U-Protect or equivalent. NOTE :- IF the desired result not obtained after testing, contractor should do re-eathing without any extra cost.
Supply and fix 40 mm bore GI tubing light grade in trenches or on pole for cable protection complete all as specified and as directed.
Material and labour aluminum lugs eye lid or barrel type complete with cripping/soldering etc including removing the wornout lugs suitable for aluminium cables/copper cables of sizes from 16 Sqmm to 95 Sqmm.
Supply and fix MCCB 415V, 3 phase 50 HZ FP 63 to 100 Amps breaking capacity 16KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.
Supply and fix MCCB 415V, 3 phase 50 HZ FP 125 Amps breaking capacity 16 KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.
Supply and fix MCCB 415V, 3 phase 50 HZ FP 200 Amps breaking capacity 36 KA. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.
Supply and fix MCB, single pole, 6-32 Amp, 240 Volts, 'C' Curve 10KA including dismantling old one MAKE :- Legrand ( DX3)/C&S/Schneider/L&T
Supply and fix MCB, triple pole and neutral , 40 Amp, 415 Volts, 'C' series 10 KA including dismantling old one MAKE :- Legrand ( DX3)/C&S/Schneider/L&T
Supply and fix triple pole and neutral , 63 Amp, 415 Volts, 'C' series 10 KA including dismantling old one MAKE :- Legrand ( DX3)/C&S/Schneider/L&T
Supply and fix LED power output driver of LED street light with power output up to 45W including dismantling defective driver from existing light fitting complete all as directed.
Supply and fix LED power output driver of LED street light with power output from 45W to 60W including dismantling defective driver from existing light fitting complete all as specified and as directed.
Supply and fix LED power output driver of LED street light with power output from 60W to 90W including dismantling defective driver from existing light fitting complete all as specified and as directed.
Supply only electronic Internal surge protector cap 10 KV suitable for differant type and diferant make LED street / flood lights as per old / existing makes like C&S,Havells, HPL, Bajaj, Crompton etc. fixed internaly complete all as specified and as directed.
Disconnecting and taking out existing SMC of any size and in any position on pole and Supply and fix in repair sheet moulding compound junction (SMC) suitable for terminating 2 Nos 4 x 6/10/16 Sqmm UG cable including Supply and fix of one in Nos MCB SP 6-32A including cable glandes- 2 Nos, and two way connector 1 No, including dismantling old one. MAKE :- Sintex/National
Supply and fix alpharex digital time switches-Astro D22 astro 230V 50Hz R5a-20T suitable for street light including making electrical connection to the terminals of astro switch & Setting the On/Off time as specified and directed by Eng-in-Charge . MAKE :- Cat part No.4126 57of Legrand or equivalent make of Havells/L&T
Material and labour for straight through (Heat shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm including dismantling the old burnt cable joint termination.
Material and labour for straight through ( Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm including dismantling the old burnt cable joint termination.
Material and labour for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust,etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior , synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut etc as per directions by Engineer-in-Charge
Material and labour for preparation of old painted surface of F/P box/LT Panel by removing all dirt, dust, etc and painting complete surface including connected accessories with one coat of synthetic enamel paint of approved colour over a coat of primer including writing of identification with proper stencil cut etc as per directions by Engineer-in-Charge
Matrial and labour for 16 meter high galvanized mast made out of heavy duty MS pipe section reducing from bottom 360 mm (A/F) to top 150 mm (A/F) thick bottom plate fixing arrangement with 20mm dia foundation bolts grouted in PCC foundation including necessary civil work etc complete with fixing arrangements for 8 in Nos LED Flood light 200 watt symmetrically fixed along with their control gear and having two point suspension system with steel wire rope of grade AISI 316 of 6mm dia & double drum winch & dismantling of old unserviceable one comprising of following :- (a) provision of wiring from panel to light fitting with single/multi core 4 sqmm copper conductor cable drawn through MS rigid/flexible conduit with necessary fitting etc. (b) provision of single pointed air termination rod and necessary fitment required for protection against lightening protection(Earthing shall be measured and paid separately) (c) provision of motorized hoisting and lowering of lights carriage for repairs.Cat part No. HM-16A-LM-ACC MAKE :- Crompton or equivalent
Fabricate , supply , install , test and commessioning of LT outdoor total enclosed LT panel board of size 0.75 x 0.50 x 0.30 meter approx tottaly enclosed made out of 3mm thick CRCA sheet , dust and vermin proof with front opening 440v,3 phase, 4 wire having 200 Amps capaciy aluminium bus bar insulated with sleeves , incoming MCCB TPN 63 Amps 440 volt 25KA 01 No and copper wiring with multistaranded cable including timer switch electronic type 01No with nessary MCBs SP16 Amps 08 Nos contractors etc, cable glands . lugs and two coats of synthetic enamel paint over a coat of red oxide primer and making necesssary pedastal 600mm height from floor level with PCC work all as specified and directed by Engr-in-Charge.
Supply and fix in repairs integral LED aviation obstruction light yellow painted die-cast AL alloy housing red coloured polycarbonate dome and accessories. MAKE :- Crompton or its equivalent in Havells/ Phillips
Supply and fix LED flood light 200W including making electrical connection to the fitting with Suitable size of service wire including dismantling of old one complete all as specified & directed by Eng-in-Charge.Cat part No.Rover pro TFS-504-120-57-60D-SL-GL-NSG. MAKE :- Crompton or equivalent
Material and laboure for PCC 1:3:6 type C-1 with 20mm agregate in copping including necessery form work all as directed by Engr-in-Charge
Material and labour for cutting through existing bituminous road /PCC/floor/ along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finishes complete all as specified and as directed. NOTE :- GI Pipe will be measured and paid seperately in respective item.
Supply and fix in repair DX3 power contractor suitable for power supply 63 Amps 4 NO Contactor including making electrical connection to the contactor complete all as specified & directed by Eng-in-Charge. MAKE :- Cat part No.4125 53 of Legrand or equivalent make of Havells/L&T
Material and laboure for disconnecting LT XLPE cable of any size from LT Panel or any location as directed for finding fault and Material and laboure for defect rectification underground cable laid in trenches or any location by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. all as directed. NOTE :- (i) The fault locating equipments will be brought to site within the 12 hours of instruction from Engr-in-Charge. (ii) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and has to be rectified within 12 hours after notification, failing which Rs 500/- per day per complaint will be recovered from the dues to the contractor. (iii) Rates included necessary earth work for opening cable for ready to jointing.
Supply and laying of reflective radium night safety water proof sticker of Suitable colour of dimension 50.8 mm X 48 M of High intensity conspicuity on street light poles complete all as specified & directed of Eng-in-Charge
Supply and fix GI ring bracket on GI octagonal pole complete all as specified and as directed by Eng-in-Charge
Supply, installation, commissioning and testing of outdoor type feeder pillar panel box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bar, of capacity 100 Amps fabricated in factory having modern fabrication duly powder coated painting, dust and vermin proof and degree of protection not less than IP-55 . The panel shall be made out of 3.00mm thick CRCA mild steel sheet , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work. The feeder pillar shall be comprising of the followings:- Incomer : (a) MCCB 63 amps 16 KA Outgoing : (a) DX3 Power Contactor , 3 phase 4NO (b) Alpha rex digital type Timer switch (c) Intelligent panel meter (d) Indicator lamp set of three
Supply, installation, commissioning and testing of outdoor type LT panel box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bar 200 Amps capacity, pre-wired and CPRI approved manufactring fabricated, duly powder coated painting, dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The panel shall be made out of 3.00mm thick CRCA mild steel sheet including suitable stainless steel nuts, bolts & washers for incoming/Outgoing feeder etc duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work. The feeder pillar shall be comprising of the followings:- Incommer :- (a) MCCB 4 pole 100 A, 25kA, thermal & magnetic release - 01 Nos Outgoing :- (a) MCCB 3 pole 63A, 16kA, thermal & magnetic release - 04 Nos (b) Digital Multifunction meter & indicator set (RYB) - 01 Set
Supply, install, testing and comissioning of decorative pole of height 10ft / 12 ft of base plate thickness 200mm X 200 mm , pole body colour black along with suspended decorative light of 40W led light including proper foundation & making electrical connection to the fitting with Suitable size of service wire/cable complete all as specified & directed by Eng-in-Charge Make: Crompton or equivalent.
PAMS ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .