Erection of 5 span 440V overhead line from upcoming site of TSS 4202 near water filling point of ppr patch to existing OH line of Parking area alongwith making of foundation and Shed for the transformer (Route Length 250Mtr)

Amount

Erection of steel pole of length exceeding 10 M but not exceeding 12 M in cement concrete (1 cement: 3 coarse sand:6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling etc.

Erection of All Aluminium conductor of 7/3.40mm to 7/4.00mm diameter (Rabbit) including binding etc as required.

Supply and erection of stay set complete(Galvanised with 19/20 mm dia X 1.8 metre long stay rode, anchor plate size 45 cm x 45 cm x 7.5 mm, thimble,stay clamps, turn bukle 20mm x 60 mm, 7/3.15 mm dia GI stay wire and stain insulator etc in cement concrete 1:3:6 foundation including excavation and refilling etc.

Supply ofClamps, bolts nuts(For bracket fixing) etc.

Erection of angle iron channel cross arm on Tubular poles.

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required.

Supply and erection of 100mmX 65mm pin insulator complete with GI spindale and nuts etc

Supply of 8 SWG GI wire. (Note- Rate taken as per 6 swg GI wire from CPWD 2014)

Erection of G.I. Wire No. 8 SWG including binding etc. as required

Supplying and drawing 2x6sqmm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. For street light service cable

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, TPN, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Dismantling of over head line comprising of alumunium over head conductor , GI wire , cross arm insulator etc as required

Dismantling of tubular pole in cement concrete foundation etc. as required

Making of platform and shed for Installation of 1 no, 250 KVA ,6.6kv/440v Transformer near upcoming site of TSS 4202 under Ashok OCP.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Provision and fixing of 25mm X 5 mm GI strip in recess for connection etc

Total impact of GST for the purpose of CTC