Construction of room for SWM Pull Toto Van

Earth work in excavation of foundation trenches or drain in all shorts of soils (including mixed soil but excluding latrine or sand stone ) including removing , spreading or staking the spoils within a lead of 75 m as directed . The item including and ramming the bottom. Balling out water as required complete.

Earthwork in filling foundation trenches or plinth with good earth. In layer complete.(payment to be made on the basis of measurement of finished quantity of work.) with earth obtained from excavation

(a) With earth obtained from excavation of foundation.

Shingle brick flat soling of picked jhama bricks including ramming and dressing bed proper level and filling joints with powdered earth or local sand.

Cement concrete with graded Stone singles( 30 mm size) excluding shuttering in floor and foundation . (a) (6:3:1) proportion

Ordinary Cement Concrete(mix 1:1.5:3) with grade stone chips (20 mm size) excluding shuttering and reinforcement. If any in the ground floor River bazree.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout propose and thick hard wood planks of approved thickness with required breacing for concrete slab beams column lintels curved after completion of works (f) 25 mm to 30mm thick shuttering without staging in foundation etc. UP TO PL

ABOVE PL

Reinforcement for reinforced concrete work in all shorts of structure including distribution bars , stirrups , binders etc. including supplying of rods, initial straightening and removal of loose rust ( if necessary ) , cutting To requisite length, hooking and bending with 16 G black annealed wire at Every inter- section, complete as per drawing and direction. (a) For work in foundation, basement and up to roof of ground floor. (I) Tor steel / Mild steel

125 mm thick brick work with first class bricks in cement morter (4:1) in ground floor

Plaster (to wall floor ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and ranking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary ( Ground floor). (a) With 4:1 cement mortar. 15mm thick

(c) With 4:1 cement mortar. 10mm thick

Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I.Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)

Applying decorative cement based paint of approved quality after preparing the surface including scrsaping the same as per manufacturer specification (ii) External surface (groud floor) (b) Two coats.

LABOUR CESS